• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.686-689
• /
• 2006

SAC is earth observation camera being developed by satrec initiative. It provides 10m in multi-spectral channel and 50km swath width at 685km altitude. The EQM of SAC has been developed and tested. In this paper, the procedure and result of the vibration test of SAC to validate structural design and to verify structural toughness are described.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.56-64
• /
• 2001

An optical temperature sensor based on the etched planar waveguide Bragg grating is developed and its performance is explored using theoretical and experimental methods. The planar waveguide is designed and fabricated using optical lithography and wet chemical etching. An efficient butt coupled optical fiber is used to examine the spectral characteristics of the grating sensor, and to investigate the grating parameters. The typical bandwidth and reflectivity of the surface etched grating has been ~0.2 nm and ~7%, respectively, at a wavelength of ~1,552 nm. The temperature-induced wavelength change of the optical sensor is found to be slightly non-linear over ${\sim}200^{\circ}C$ temperature range. Theoretical models for the grating response of the sensor based on waveguide and classical laminated plate deformation theories agree with experiments to within acceptable tolerance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.345-348
• /
• 2005

In this paper we propose a configuration for an optically compensated bend (OCB) mode using circular polarizers with wide-band wide-viewing-angle (WBWA) quarter-wave plates (QWPs). Parameters of LC material and compensation films are optimized for wide viewing angle characteristics and excellent spectral properties of the OCB mode.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.230-235
• /
• 2015

The demands for reliable particle cloud temperature measurement exist in many process industries and scientific researches. Particle cloud temperature measurements depend on radiation thermometry at two or more color bands. In this study, we developed a sensitive, fast response and compact online infrared two-color probe to measure the temperature of a particle cloud in a phase of two field flow (solid-gas). The probe employs a detector contained two InGaAs photodiodes with different spectral responses in the same optical path, which allowed a compact probe design. The probe was designed to suit temperature measurements in harsh environments with the advantage of durability. The developed two-color probe is capable of detecting particle cloud temperature as low as $300^{\circ}C$, under dynamic conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.752-760
• /
• 1991

The computer aided analysis is performed to investigate the influence of physical parameters (thickness and doping concentration, etc.) in the window, emitter, base on the efficiency characteristics of a uniformly doped hetroface cell. A field aided heteroface cell is newly designed on a basis of optimum data obtained from the theoretical analysis. The field aided heteroface cell fabricated using MOCVD exhibits a total/active area conversion efficiency of EFF. (tot) = 18.9% /EFF. (act.) = 21.4% under the natural incident light of 56.2 mW/cm\ulcorner having a low series resistance of Rs = 0.94 \ulcornercm\ulcornerand a high spectral response of S.R. (ext) > 90% in a range of $7700{\AA}$ < $8500{\AA}$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3318-3326
• /
• 2010

Five new series of 3,4-ethylenedioxythiophene derivatives carrying important pharamacophores, viz., amide, ester, ether and active secondary aryl moieties have been designed and synthesized through multistep reactions starting from thiodiglycolic ester and diethyl oxalate. They have been characterized by elemental and spectral data. All the target compounds have been screened for their anticonvulsant activity at three different models viz. maximal electroshock (MES), subcutaneous metrazole (scMET), and 6 Hz screen and evaluated for their neurotoxicity in rotorod model. Compound 6a emerged as lead with no neurotoxicity. All the five series of compounds are safe in the toxicity studies at the maximum dose of 300 mg/kg of body weight. Amongst the tested compounds, the ester pharmacophore with thioamide fragment has showed better activity than the other analogs.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.551-556
• /
• 2014

The treatment of alkylated nitro derivatives of indazole with 2-(4-chlorophenyl)acetonitrile under basic conditions gave the new 8-chloro-3-alkyl-3H-pyrazolo[4,3-a]acridine-11-carbonitriles via the nucleophilic substitution of hydrogen which proceeds at room temperature with concomitant cyclisation in fairly good yields. The structures of all newly synthesized compounds were confirmed by IR, $^1H$ NMR, $^{13}C$ NMR and mass spectral data. Fluorescence experimental results of all newly synthesized compounds revealed remarkable photoluminescence properties and strong green fluorescence properties. Also, the new compounds exhibited potent antibacterial activity and their antibacterial activity (MIC) against Gram positive (Staphylococcuse aureus methicillin resistant S. aureus and Bacillus subtilis) and negative bacterial (Pseudomonas aeruginosa and Escherichia coli) species were determined.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.377-385
• /
• 2018

A new class of Chalcone-Sulphonamide hybrids has been designed by condensing appropriate sulphonamide scaffold with substituted chalcones tethered by chloroacetyl chloride as a multi-target drug for therapeutic treatment. Chalcones were prepared by Claisen-Schmidt condensation of a substituted aldehyde with para aminoacetophenone. These Chalcone-Sulphonamide hybrids were screened by means of their antibacterial activity by NCCLS method. Among all these compounds, 5e and 5c displayed more potent growth inhibitory activity against Staphylococcus epidermidis and Pseudomonas aeruginosa bacteria respectively. Further, these hybrids were evaluated for their antifungal activity, among all hybrid 5a exhibited potent antifungal activity. The synthesized compounds were characterized by FT-IR, $^1HNMR$, $^{13}CNMR$ and HR-LCMS and spectral study supports the structures of synthesized Chalcone-Sulphonamide hybrids.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.31-38
• /
• 2005

Recent earthquakes have shown that near-field earthquakes can produce spectral demands significantly larger than those considered in current design code. International Atomic Energy Agency (IAEA) has recently initiated a coordinated research program on safety significance of near-field earthquakes. The purpose of this program is to focus on the assessment of vulnerability of nuclear facility structures by using and adapting the best available engineering practices appropriate to evaluate the effects of near-field earthquakes. The objective of this paper is to evaluate of seismic responses of a shear building test specimen subjected to near-filed earthquakes. To achieve the objective, the seismic responses of the test specimen, evaluated by the Displacement Coefficient Method (DCM) and Nonlinear Dynamic Analysis (NDA), are compared with those by the experimental tests.