• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1390-1398
• /
• 2006

A gerotor pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular the pump is an essential machine element that feeds lubricant oil in an automotive engine. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the two rotors. Usually the outer one is characterized by lobes with a circular shape, while the inner rotor profile is determined as a conjugate to the other. For this reason the first topic presented here is the definition of the geometry of the rotors starting from the design parameters. The choice of these parameters is subject to some limitations in order to limit the pressure angle between the rotors. Now we will consider the design optimization. The first step is the determination of the instantaneous flow rate as a function of the design parameter. This allows us to calculate three performance indexes commonly used for the study of positive displacement pumps the flow rate irregularity, the specific flow rate, and the specific slipping. These indexes are used to optimize the design of the pump and to obtain the sets of optimum design parameter Results obtained from the analysis enable the designer and manufacturer of the oil pump to be more efficient in this field.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.67-74
• /
• 2000

Recently, PTFE-polymide composites are being used self-lubricating parts for industrial field. Thus, this study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polymide composites. The friction and wear test was carried out for the different composition ratio under the atomsphere room temperature and constant load of 7.69N and their friction and wear properties were compared with each other at various sliding speed. notable results are summarized as follows. PTFE 100% showed that friction coefficient was almost same values at 0.94 and 1.88m/s but the value was decreased at 2.83m/s because the friction temperature is higher than low speed. PTFE 80%-PI 20% showed the lowest mean friction coefficient at 2.83m/s. PTFE 20-PI 80% showed the highest friction coefficient at 0.94m/s and the value was decreased at high speed but the value is higher than other materials except PTFE 100 %. PI 100% showed the highest friction coefficient at 0.94 and 1.88m/s becuase adhesive wear mainly occurred that speed. PTFE 100% showed highest specific wear rate on the whole. Specific wear rate of PTFE 80%-PI 20% was almost the same value with PTFE 20%-PI80%. PI 100%showed the lowest value at high sliding speed because the friction surface was thicken and carbonated by high friction temperature.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.104-109
• /
• 2011

We have investigated the anisotropy of the superconducting properties for $CaC_6$ and $SrC_6$ using upper critical fields ($H_{c2}$) and specific heat ($C_p$). From the upper critical fields of $CaC_6$ at different magnetic field orientations, H//c and H// ab, the anisotropy is found to be ~ 5 at low temperatures, much larger than that of $SrC_6$. These results are in contrast to the stronger anisotropy in the electronic structure for $SrC_6$ than for $CaC_6$ indicating a stronger anisotropy in the superconducting gap in $CaC_6$. The findings are confirmed by the temperature dependence of the superconducting specific heat below $T_c$ for $CaC_6$ and $SrC_6$, suggesting the important role of anisotropic electron-phonon coupling in superconducting intercalated graphites.

• Carbon letters
• /
• 제15권3호
• /
• pp.192-197
• /
• 2014

A hierarchical pore structured novolac-type phenol based-activated carbon with micropores and mesopores was fabricated. Physical activation using a sacrificial silicon dioxide ($SiO_2$) template and chemical activation using potassium hydroxide (KOH) were employed to prepare these materials. The morphology of the well-developed pore structure was characterized using field-emission scanning electron microscopy. The novolac-type phenol-based activated carbon retained hierarchical pores (micropores and mesopores); it exhibited high Brunauer-Emmett-Teller specific surface areas and hierarchical pore size distributions. The hierarchical pore novolac-type phenol-based activated carbon was used as an electrode in electric double-layer capacitors, and the specific capacitance and the retained capacitance ratio were measured. The specific capacitances and the retained capacitance ratio were enhanced, depending on the $SiO_2$ concentration in the material. This result is attributed to the hierarchical pore structure of the novolac-type phenol-based activated carbon.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.98-104
• /
• 2007

The carbon fiber reinforced carbon composite (CFRC) materials are necessary for the advanced industries that require the thermal resistance. And the development and research for CFRC has been in progress in the field of aerospace and defense industry. CFRC have several advantages and special properties such as excellent anti ablation, outstanding strength retention at very high temperature, high heat capacity and thermal transport, high specific stiffness and strength, and high thermal shock resistance. They have been used as aircraft brake, rocket nozzle, nose cones, jet engine turbine wheels, and high speed craft. Since the technology related to CFRC was prohibited from importing and exporting, we developed our own technology to produce F-16 B32 brake disk made out of CFRC, and then we performed various tests to observe the characteristics of CFRC-based brake disk developed in this study in view of density, strength, friction, specific heat, and heat conductivity.

• 한국수의병리학회지
• /
• 제7권1호
• /
• pp.11-15
• /
• 2003

Antigen retrieval (AR) techniques were widely used to recover the antigenicity from the fixed tissues, which were guided by the philosophy of rendering immunohistochemistry (IHC) applicable to routine formalin-fixed, paraffin-embedded tissues for wide application of IHC in research and clinical filed for morphological observation like as anatomy, histology and pathology. Protease antigen recovery (PAR) is an AR technique, which is obtained the antigen retrieve by using enzyme digestion, and commonly used in IHC field. However, during the IHC for the detection of ovine herpesvirus 2 (OvHV-2) antigen, we noted lymphocyte-like cells-specific staining in the infiltrated cells into various organs like as liver and kidney, which was also shown in the IHC tissues with isotype control. However, those signals were not observed in the tissues conducted with in situ hybridization. Therefore, we analyzed the specificity of the IHC detection results. We found that PAR may induce false-positive result during IHC in lymphocyte-like cells, which were infiltrated mainly around vessels and in interstitial tissues. Through the Phenotyping, we realized that those false-positive cells were B-cell-related cells. These results suggest that PAR, a AR using protease, may induce non-specific false-positive reactions during IHC.

• 한국전자거래학회지
• /
• 제16권2호
• /
• pp.143-158
• /
• 2011

본 연구는 Q&A(question and answer:질문-답변) 커뮤니티 사이트에서 집단지성의 특성을 추출하고, 이를 이용한 전문지식이나 정보 검색을 위한 전문영역 검색(vertical search) 을 위한 프레임워크를 제안한다, 많은 Q&A 사이트로부터 얻은 정보는 하나의 집단지성의 형태로 볼 수 있으며, 전문영역 검색은 특정 전문 분야 검색에 초점을 맞춘 검색 방법이다. 제안된 프레임워크는 사용자가 검색하고자 하는 질의어와 연관되어 있는 질문(question)과 답변(answer) 정보를 이용하여 관련어를 확장한 후, 이를 기반으로 전문지식을 요구하는 특정 도메인분야에 적용하게 된다. 이를 통해 일반 검색 엔진을 통해 검색된 검색 결과보다 유용한 정보와 전문적인 상세정보까지 제공해 줄 수 있다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제14권1호
• /
• pp.41-65
• /
• 2005

The credit ration is a significant area of financial management which is of major interest to practitioners, financial and credit analysts. The components of credit rating are identified decision models are developed to assess credit rating an the corresponding creditworthiness of firms an accurately ad possble. Although many early studies demonstrate a priori which of these techniques will be most effective to solve a specific classification problem. Recently, a number of studies have demonstrate that a hybrid model integration artificial intelligence approaches with other feature selection algorthms can be alternative methodologies for business classification problems. In this article, we propose a hybrid approach using rough set theory as an alternative methodology to select appropriate attributes for case-based reasoning. This model uses rough specific interest lies in lthe stable combining of both rough set theory to extract knowledge that can guide dffective retrevals of useful cases. Our specific interest lies in the stable combining of both rough set theory and case-based reasoning in the problem of corporate credit rating. In addition, we summarize backgrounds of applying integrated model in the field of corporate credit rating with a brief description of various credit rating methodologies.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.170-178
• /
• 2016

Composited molybdenum oxide and amorphous carbon (MoO₃/C) as anode material for lithium ion batteries has been successfully synthesized by calcining polyaniline (PANI) doped with ammonium heptamolybdate tetrahydrate (AMo). The as prepared electrode material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM). The electrochemical performance of the anode was investigated by galvanostatic charge/discharge, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The MoO₃/C shows higher specific capacity, better cyclic performance and rate performance than pristine MoO₃ at room temperature. The electrochemical of MoO₃/C properties at various temperatures were also investigated. At elevated temperature, MoO₃/C exhibited higher specific capacity but suffered rapidly declines. While at low temperature, the electrochemical performance was mainly limited by the low kinetics of lithium ion diffusion and the high charge transfer resistance.

• 한국초지조사료학회지
• /
• 제35권3호
• /
• pp.225-231
• /
• 2015

Improving current pasture productivity by precision management requires practical tools to collect site specific pasture biomass data. Recent developments in unmanned aerial vehicle (UAV) technology provide cost effective and real time applications for site specific data collection. For the mapping of herbage biomass (BM) on a hill pasture, we tested a UAV system with digital cameras (visible and near-infrared (NIR) camera). The field measurements were conducted on the grazing hill pasture at Hanwoo Improvement Office, Seosan City, Chungcheongnam-do Province, Korea on May 17 and June 27, 2014. Plant samples were obtained from 28 sites. A UAV system was used to obtain aerial photos from a height of approximately 50 m (approximately 30 cm spatial resolution). Normalized digital number (DN) values of Red and NIR channels were extracted from the aerial photos and a normalized differential vegetation index using DN ($NDVI_{dn}$) was calculated. The results show that the correlation coefficient between BM and $NDVI_{dn}$ was 0.88. For the precision management of hilly grazing pastures, UAV monitoring systems can be a quick and cost effective tool to obtain site-specific herbage BM data.