• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.3
• /
• pp.278-291
• /
• 2024

This study performed three research methods (destructive, non-destructive, and panoramic image analysis) to determine the most useful for identifying seaweed habitat characteristics. Panoramic images are suitable for understanding the overall seaweed distribution. The composition of the main dominant seaweed species showed a significant difference between the destructive and non-destructive methods using Quadrat. The destructive method showed Rhodophyta dominance, whereas the non-destructive was showed Phaeophyta as dominant. Destructive methods are disadvantageous because they destroy natural communities in sea areas where bleaching is severe. Non-destructive methods are disadvantageous because of the difficulty in analyzing small species. Performing 10 surveys using a non-destructive method was found to explain up to 80% of the species identified by the destructive method. However, considering the difficulty of field investigation, repeating the investigation with non-destructive methods at least 6-7 times is necessary to ensure that more than 60% of the destructive methods can be interpreted. To understand the distribution of oceanic marine algae, performing both destructive and non-destructive surveys are necessary, as each has its own merits and demerits.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.433-445
• /
• 2014

The objective of study was to analyze seasonal and inter-annual patterns of water chemistry of Miho Stream watershed during 2004 - 2007 along with some influences of tributaries and summer monsoon on the stream water quality. For the study, eight physico-chemical parameters such as nitrogen, phosphorus, BOD, COD and chlorophyll-a (CHL) etc. were analyzed in relation to spatial and temporal variability of seven sampling sites of the mainstream and some tributaries in the watershed. In the upstream reach, Mean of BOD, COD and TP averaged 3.2 mg/L, 6.5 mg/L and $186{\mu}g/L$, respectively, indicating an eutrophic conditions as a III-rank in the stream water quality criteria from the Ministry of Environment, Korea(MEK). The eutrophic water was due to a combined effect of Chiljang tributary with high nutrients ($TP=844{\mu}g/L$, TN=8.087 mg/L) and the point sources from some wastewater treatment plants. In the meantime, BOD, TN, and TP in the downstream reach were about > 1.2-1.5 folds than the values of the midstream reaches. This was mainly attributed to effluents of nutrient rich-water (mean TN: 11.980 mg/L) from two tributaries of Musim Stream and Suknam Stream, which is directly influenced by nearby wastewater disposal plants. Seasonal analysis of water chemistry showed that summer monsoon rainfall was one of the important factors influencing the water quality, and water quality had a large spatial heterogeneity during the rainfall period. In the premonsoon, BOD in the downstream averaged $6.0{\pm}2.47mg/L$, which was 1.4-fold greater than the mean of upstream reach. Mean of CHL-a as an indicator of primary productivity in the water body, was > 2.2 - 2.9 fold in the downstream than in the upstream, and this was a result of the high phosphorus loading from the watershed. Overall, our data suggest that some nutrient controls in point-source tributary streams are required for efficient water quality management of Miho Stream.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.71-84
• /
• 2017

Radon, which enters the interior environment from soil, rocks, and groundwater, is a radioactive gas that poses a serious risk to humans. Indoor radon concentrations are measured to investigate the risk of radon gas exposure and reliable radon concentration mapping is then performed for further analysis. In this study, we compared the predictive performance of various univariate kriging algorithms, including ordinary kriging and three nonlinear transform-based kriging algorithms (log-normal, multi-Gaussian, and indicator kriging), for mapping radon concentrations with an asymmetric distribution. To compare and analyze the predictive performance, we carried out jackknife-based validation and analyzed the errors according to the differences in the data intervals and sampling densities. From a case study in South Korea, the overall nonlinear transform-based kriging algorithms showed better predictive performance than ordinary kriging. Among the nonlinear transform-based kriging algorithms, log-normal kriging had the best performance, followed by multi-Gaussian kriging. Ordinary kriging was the best for predicting high values within the spatial pattern. The results from this study are expected to be useful in the selection of kriging algorithms for the spatial prediction of data with an asymmetric distribution.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.391-401
• /
• 2004

In this paper, we introduce a novel coding method to efficiently enable spatial random access for high resolution video. In terms of resolution and display size, standard display devices (such as cathode-ray tubes. monitors. PDAs, and LCDs) do not sufficiently support high resolution video such as digital cinema and panoramic video. Currently, users have no choice but to view video at lower resolution as a result of down-sampling, or only a partial region of the video due to display size limitations. Our proposed method. which we call the B-map, represents the set of starting locations of the coded segments in a picture frame. This information, or B-map, is first sent to the decoder prior to the coded data stream of the frame and is then used for fast local decoding. To test our method, we compare our B-map with JPEG tiling and the JPEG Resynchronization marker. Experimental results show that the proposed coding method requires less overhead than existing methods during the same decoding time. The results show promise for future panoramic or digital cinema applications.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.42-49
• /
• 2004

Purpose : The quantization noise in magnetic resonance imaging (MRI) systems is analyzed. The signal-to-quantization noise ratio (SQNR) in the reconstructed image is derived from the level of quantization in the signal in spatial frequency domain. Based on the derived formula, the SQNRs in various main magnetic fields with different receiver systems are evaluated. From the evaluation, the quantization noise could be a major noise source determining overall system signal-to-noise ratio (SNR) in high field MRI system. A few methods to reduce the quantization noise are suggested. Materials and methods : In Fourier imaging methods, spin density distribution is encoded by phase and frequency encoding gradients in such a way that it becomes a distribution in the spatial frequency domain. Thus the quantization noise in the spatial frequency domain is expressed in terms of the SQNR in the reconstructed image. The validity of the derived formula is confirmed by experiments and computer simulation. Results : Using the derived formula, the SQNRs in various main magnetic fields with various receiver systems are evaluated. Since the quantization noise is proportional to the signal amplitude, yet it cannot be reduced by simple signal averaging, it could be a serious problem in high field imaging. In many receiver systems employing analog-to-digital converters (ADC) of 16 bits/sample, the quantization noise could be a major noise source limiting overall system SNR, especially in a high field imaging. Conclusion : The field strength of MRI system keeps going higher for functional imaging and spectroscopy. In high field MRI system, signal amplitude becomes larger with more susceptibility effect and wider spectral separation. Since the quantization noise is proportional to the signal amplitude, if the conversion bits of the ADCs in the receiver system are not large enough, the increase of signal amplitude may not be fully utilized for the SNR enhancement due to the increase of the quantization noise. Evaluation of the SQNR for various systems using the formula shows that the quantization noise could be a major noise source limiting overall system SNR, especially in three dimensional imaging in a high field imaging. Oversampling and off-center sampling would be an alternative solution to reduce the quantization noise without replacement of the receiver system.

• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.1-28
• /
• 2000

The purpose of this study is to clarify the suburbanization of manufacturing, and location and linkages of decentralized manufacturing from Metropolitan Pusan by means of case study on manufacturing location and linkages in the suburb of Metropolitan Pusan. Kimhae city and Yangsan-Gun toward which heavy decentralization of manufacturing from the Metropolitan Pusan has been done. Both hard data and soft data were used as the basic data. Hard data are the statistical data in statistical yearbooks and firm list in directories. The former consists of the number of establishments and employees classified by product type, firm size and unit area. The latter consists of owner's names, addresses, employee number, products and headquarters of firms. Soft data are the results of the interviews with the 242 owners of firms in the four case study areas selected by Proportional Stratified Sampling Method. The major findings are as follows: 1. The spatial variations of manufacturing in the suburb was regularized in the latter half of 1970's. The primary processes to decentralize manufacturing from Metropolitan Pusan were the birth, relocation and establishment of branches of the firms. Among them the relocation of small outer-oriented single-location firms from Pusan was the most important. 2. The spatial variations undergoing spatial expansion of manufacturing distribution and increase of agglomeration degree of manufacturing, proceeded from the adjacents of Metropolitan Pusan to the outer areas along the main transportation route. 3. The main factors which caused manufacturing to decentralize from the Metropolitan Pusan were firm policy and land for this policy. The main locational factors which induced the decentralizing manufacturing into the suburb were land, market and transportation. 4. The strength of linkages with the outside of the study area is stronger than that of linkages with the inside. There is distance-decay-function in the strength of linkages with the outside, and linkages with short distant areas are stronger than those with long distant areas. 5. The ranges of spatial linkages in procurement of materials, in subcontraction and in marketing are wider than those in ordering. 6. The main factors which cause the formation of linkages are different by types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and the subsequent marketing difficulties, in subcontraction linkages; fluctuation, cost reduction, insufficient facility and characteristics of products, in ordering linkages; subcontract, characteristics of product and the subsequent marketing difficulties, in marketing linkages. 7. The changes of linkages owing to locational changes of firms were great, and were greater in long distant areas than in short distant areas. 8. The main factor influencing on the changes of linkages was the easiness in the transportation of goods, movement of labour and contacts with customers. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of relocation of decentralizing firms on the suburbanization; the factors of manufacturing decentralization; spatial characteristics of linkages; linkage changes owing to relocation of firms. Some were proved to be partly consistent: locational factors inducing decentralized manufacturing into the suburb were proved to be inconsistent. I think that the results of previous studies on the other areas can be applicable to the explanation on the decentralization of Metropolitan manufacturing from the viewpoint of the suburb. For the better explanation on the decentralization of Metropolitan manufacturing, more empirical case studies on the suburbanization of manufacturing are necessary.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.123-135
• /
• 2006

Spatial variability and distribution map of soil properties and the relationships between soil properties and crop yields are not well characterized in agroecosystems that have been land leveled to facilitate more cultivation of the new reclaimed sloping highland. Potato, onion, carrot, Chinese cabbage and radish were grown on the coarse sandy loam soil in 2004. Soil moisture content, soil penetration resistance and crop yield were sampled in the $10m{\times}50m$ field consisted of five plots. Sampling sites of each cultivation plot were 33 for the soil moisture, 11 for the soil penetration and 33 for the crop yield. The results of semivariance analysis, most of models were shown spherical equation. The significant ranges of each spatial variability model for the soil moisture, soil penetration and crop yield were broad as 33-35 meters in the potato cultivation plot, and that in the Chinese cabbage cultivation plot was narrow as 5-6 meters. The coefficient of variances (C.V.) of moisture, penetration and yield were various from 14 to 59 percents in five cultivation plots. The highest C.V. of potato yield was 59 percents, and that of the radish cultivation plot was as low as 14 percents. The required sample numbers for the determination of soil moisture content, soil penetration resistance and crop yield with error 10% at 0.05 significant level were ranged 8-40 for soil moisture, 7-25 for soil penetration and 424-4,678 for crop yield. The variogram and distribution map by kriging described field characteristics well so that the spatial variability would be useful for soil management for better efficiency and precision agriculture in the reclaimed highland.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.99-120
• /
• 1998

The purpose of this study is to clarify the industrialization process, and locational factors and linkages of manufacturing in Jangyu-Myun, a suburb of Metropolitan Pusan, toward which heavy decentralization of manufacturing from Pusan has been done. Hard data and soft data were used as the basic data. Hard data used for this study were both the statistical data which consists of the number of establishments and employee classified by product type, firm size, organizational type and unit area(dong) which were listed in statistics yearbooks, and the list of the owner's names, addresses, employee number, products and headquarters of firms which were listed in firm directories. Soft data were the results of the interviews with the 53 owners of firms surveyed among the firms selected by Proportional Stratified Sampling Method. The major findings were as follows: (1) Manufacturing location in Jangyu-Myun was regularized in 1980's in which decentralization of manufacturing was activiated. Though the industrialization of study area resulted from the birth, relocation and establishment of branches of the firms originated from the other regions, the relocation of small outer-oriented firms from the central city was the most important factor among them. (2) The main locational factors which induced the decentralizing manufacturing from the central city into Jangyu-Myun are closely related to land, transportation, personal factor, raw material suppliers and market. (3) The differences of important locational factors by the size and organizational type of firms are relevant to the characteristics of manufacturing location. (4) The changes of linkages attendant upon locational changes of firms were not so great and were localized in labor supply and marketing. (5) The strength of linkages is strong in the procurement of materials, in the subcontraction and in the marketing, but not in the ordering. (6) The main factors influencing on the formation of linkages are different by the types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and production capacity in the subcontraction and ordering; characteristics of products and the subsequent difficulties, in the marketing. (7) With the exception of procurement linkages, the strength of linkages with the outside of the study area are stronger than the linkages with the inside. The strength of linkages with the outside has distance-decay-function and strong linkages with the central city. (8) These spatial characteristics of linkages are different by products type, firm size and organizational type of firms: the spatial ranges of linkages are wider in the multi-location firms than in the single-location firms; the larger the firm size, the wider the spatial range of linkages: there is no consistent trend by products type. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of central city manufacturing relocation on industrialization in the suburb: different decentralization by products type, firm size and organizational types of firms: different locational factors by products type, firm size and organizational types of firms; linkage changes attendant upon locational changes of firms; spatial differences of linkages by products type, firm size and organizational type of firms. Some other factors were proved to be partly consistent: locational factors and spatial characteristics of linkages. Accordingly I think that the results of previous studies on the other areas can be applicable to the explanation of the location and linkage of manufacturing in Jangyu-Myun. For the better explanation on the characteristics of manufacturing decentralization from the central city, more empirical case studies on the location and linkage of manufacturing in the suburb areas are necessary.

• Journal of Korea Water Resources Association
• /
• v.42 no.12
• /
• pp.1039-1052
• /
• 2009

Radar measurement with high temporal and spatial resolutions can be a valuable source of data, especially in the areas where rain gauge installment is not practical. However, this kind of data brings with it many errors. The objective of this paper is to propose a method to evaluate statistically the quantitative and qualitative accuracy at different radar ranges, temporal intervals and raingage densities and use a bias adjustment technique to improve the quality of radar rainfall for the purpose of hydrological application. The method is tested with the data of 2 storm events collected at Jindo (S band) and Kwanak (C band) radar stations. The obtained results show that the accuracy of radar rainfall estimation increases when time interval rises. Radar data at the shorter range seems to be more accurate than the further one, especially for C-band radar. Using the Monte Carlo simulation experiment, we find out that the sampling error of the bias between radar and gauge rainfall reduces nonlinearly with increasing raingage density. The accuracy can be improved considerably if the real-time bias adjustment is applied, making adjusted radar rainfall to be adequately good to apply for hydrological application.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.315-326
• /
• 2013

This study investigated the temporal-spatial distribution and variations in water quality parameters (temperature, salinity, pH, DO, COD, SPM, DIN, DIP, silicate, TN, TP, and chlorophyll-a) in the coastal area of Jeju, Korea, adjacent to aquaculture ponds (Aewol-ri, Haengwon-ri, Pyosun-ri, and Ilkwa-ri). Data were collected bimonthly from February 2010 to December 2011. A principal component analysis (PCA) identified three major factors controlling variations in water quality during the sampling period. Aquaculture effluent water led to large changes in nutrient levels. The highest nutrient values were observed during the investigation period. The relatively large increase in organic matter at the sampling stations coupled with sea area runoff events during the summer rainy period. Variation in chlorophyll-a concentration was mainly driven by meteorological factors such as air temperature and rainfall in the coastal areas of Aewol and Haengwon. In the coastal areas of Pyosun and Ilkwa, pollution was caused by anthropogenic factors such as discharge of aquaculture effluent water. High nutrient concentrations at the majority of the coastal stations indicate eutrophication of coastal waters, especially within a distance of 300 m and depth of 10m from drainage channels. Coastal eutrophication driven by aquaculture effluent may be harmful inshore. Events such as eutrophication may potentially influence water pollution in aquaculture ponds when seawater intake is detected because of aquaculture effluent water.