• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1459-1474
• /
• 2006

The present study is focused on the development of the RIF (Representative Interactive Flamelet) model which can overcome the shortcomings of conventional approach based on the steady flamelet library. Due to the ability for interactively describing the transient behaviors of local flame structures with CFD solver, the RIF model can effectively account for the detailed mechanisms of $NO_x$ formation including thermal NO path, prompt and nitrous $NO_x$ formation, and reburning process by hydrocarbon radical without any ad-hoc procedure. The flamelet time of RIFs within a stationary turbulent flame may be thought to be Lagrangian flight time. In context with the RIF approach, this study adopts the Eulerian Particle Flamelet Model (EPFM) with mutiple flamelets which can realistically account for the spatial inhomogeneity of scalar dissipation rate. In order to systematically evaluate the capability of Eulerian particle flamelet model to predict the precise flame structure and NO formation in the multi-dimensional elliptic flames, two methanol bluffbody flames with two different injection velocities are chosen as the validation cases. Numerical results suggest that the present EPFM model has the predicative capability to realistically capture the essential features of flame structure and $NO_x$ formation in the bluff-body stabilized flames.

• 대한기계학회논문집B
• /
• 제38권5호
• /
• pp.373-380
• /
• 2014

액막류는 다양한 산업분야에 적용되는 쉘-튜브 열교환기의 주요 열교환기구로 오랫동안 연구되어왔다. 액막류의 한쪽 경계는 고정벽에 접하고 있지만 반대편에서는 기체 영역과 경계를 형성하므로 액막 레이놀즈 수가 증가함에 따라 쉽게 불안정해지는 특징을 가지고 있다. 따라서 레이놀즈 수가 증가함에 따라 자유표면 파동 현상이 나타나는데, 층류 영역에서는 큰 진폭의 고립파가, 난류 천이 이후에는 낮은 진폭의 물결파가 나타난다. 액막류의 열전달 성능은 액막의 두께에 의해 크게 지배받는데 액막류에 동반된 파동은 액막 두께의 시공간적 변화를 의미하는 것이므로 이에 대한 정보를 해석적으로 수집하는 것은 액막류 열전달 성능을 예측하는데 필수적이다. 본 연구에서는 낮은 진폭의 물결파를 동반한 난류 액막류에 대하여 여러 가지 난류 모형을 적용한 해석결과들을 실험결과와 비교함으로써 난류 모형들에 대한 평가를 실시하였다.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.672-681
• /
• 2004

Direct numerical simulation was carried out to study the vortical structures of the flow around a wall-mounted cube in a channel at Re=1,000 and Re=3,500 based on cubic height and bulk mean velocity. The cubic obstacle is situated in the entrance region of the channel flow where the boundary layers are developing. Upstream of the obstacle, steady and unsteady laminar horseshoe vortex systems are observed at Re=1,000 and Re=3,500, respectively; the near-wake flow is turbulent in both cases. The flow separates at each leading sharp edge of the cube, and subsequent vortex roll-up is noticed in the corresponding free-shear layer. The vortex shedding from the upper leading edge (upper vortices) and that from the two lateral leading edges (lateral vortices) are both quasi-periodic and their frequencies are computed. The upper and lateral vortices further develop into hairpin and Λ vortices, respectively. A series of instantaneous contours of the second invariant of velocity gradient tensor helps us identify spatial and temporal behaviors of the vortices in detail. The results indicate that the length and time scales of the vortical structures at Re=3,500 are much shorter than those at Re:1,000. Correlations between the upper and lateral vortices are also reported.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.289-296
• /
• 2016

본 연구에서는 공압인공근육을 구동부로 가지는 내부형 연속체로봇의 기구학을 제시한다. 연속체로봇 단일마디는 세 개 인공근육의 병렬구조로 구성되며, 각 인공근육은 가해지는 공기압력에 의해서 독립적으로 수축하여 근육의 한쪽이 부착된 기준 마디절에 대해서 근육의 다른쪽이 연결된 원격의 마디절의 공간상 운동이 발생한다. 인공근육의 굽힘형상을 고려하여 원격 마디절 중심에서의 방위와 위치를 예측하는 기구식을 유도하였으며, 단일 마디를 여러 층으로 적층하였을 때 로봇 말단장치에서의 방위와 위치도 변환행렬의 곱으로 제시한다. 그리고 인공근육의 길이/압력 변화에 따른 말단장치에서의 속도를 계산하는 자코비안 행렬을 구동부의 위치배열을 고려하여 유도하였고 실제 실험을 통해서 제시한 기구식의 유효성을 검증하였다.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.121-127
• /
• 2011

콘크리트 내부에 존재하는 공극(void)의 공간적 분포는 콘크리트의 역학적, 물리적 거동에 큰 영향을 미친다. 따라서 콘크리트 재료 물성의 파악과 건정성 평가를 위해 내부에 존재하는 공극의 분포 상태를 파악하는 것은 매우 중요하다. 콘크리트에는 육안으로 보이는 재료 표면의 공극 이외에도 내부 공극이 존재한다. 본 연구에서는 경량골재 콘크리트의 공극 분포를 파악하기 위하여 micro CT(X-ray microtomography)를 활용하여 생성된 3차원 콘크리트 디지털 시편을 사용하였다. 흑백처리된 단면 이미지를 중첩하여 공극을 묘사할 수 있는 3차원 시편을 생성하였다. 공극의 분포 상태를 확률적으로 묘사하기 위하여 확률 분포 함수 two-point correlation function과 lineal-path function으로 분석하였다. 또한, 이미지 분석을 통해서 콘크리트 시편의 공극의 밀도 분포를 파악하였다. 콘크리트 내부에 있는 개별 경량 골재의 공극도 이미지 처리와 확률 분포함수를 사용하여 분석하였다. Micro CT와 3차원 이미지 분석 방법을 통하여 콘크리트 내부에 존재하는 공극의 분포 상태를 효과적으로 파악할 수 있음을 확인하였다.

• 한국공간구조학회논문집
• /
• 제11권3호
• /
• pp.115-123
• /
• 2011

ETFE막재는 PTFE막재에 비해 상대적으로 두께가 매우 얇고 유연하기 때문에 다양한 온도환경에 따른 막재의 재료특성을 알아볼 필요가 있다. 본 논문에서는 ETFE 막재에 대해 다양한 온도하에서의 재료특성 실험을 수행하였다. 첫째로, -20$^{\circ}C$, 0$^{\circ}C$, +20$^{\circ}C$, +40$^{\circ}C$ 하에서 각각 5 시험편을 이용하여 인장실험을 수행하였으며, 각 온도하에서의 항복응력, 인장강도, 영계수를 도출하였다. 두 번째는, 25$^{\circ}C$, 40$^{\circ}C$, 60$^{\circ}C$ 하에서 각각 3MP, 6MP, 9MP의 하중을 가하여 각 온도에 따른 크리프 변형도를 알아보았다. 마지막으로, -15$^{\circ}C$, 0$^{\circ}C$, 20$^{\circ}C$ 하에서의 인열강도 시험을 수행하였다. 시험결과분석에 따르면, ETFE막재의 전제적인 거동은 크게 변하지 않았으나, 재료특생은 온도의 영향을 받고 있음을 알 수 있었다.

• International Journal of Automotive Technology
• /
• 제2권4호
• /
• pp.165-170
• /
• 2001

This study is focussed on the investigation of spray characteristics from the high pressure gasoline injector for the application of gasoline direct injection engine. For the analysis of spray structure of high pressure gasoline injector; the laser scattering method with a Nd-Yag laser and the Phase Doppler particle analyzer system were applied to observe the spray development and the measurement of the droplet size and velocity of the spray, respectively. Also spatial velocity distribution of the spray droplet was measured by use of the particle image velocity system. Experimental results show that high pressure gasoline injector shapes the hollow-cone spray, and produce the upward ring shaped vortex on the spray surface region. This upward ring shaped vortex promotes the secondary atomization of fuel droplets and contributes to a uniform distribution of fuel droplets. Most of fuel droplets are distributed under 31$\mu m$ of the mean droplet size (SMD) and the frequency distribution of the droplet size under 25$\mu m$ is over 95% at 7 MPa of injection pressure. According to the experimental results of PIV system, the flow patterns of the droplets velocity distribution in spray region are in good agreement with the spray macroscopic behaviors obtained from the visualization investigation.

• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.99-105
• /
• 2010

In order to obtain velocity profile of blood flow with high spatial resolution, a micro PIV technique consisted of a fluorescent microscope, double-pulsed YAG laser, cooled CCD camera was applied to in-vitro blood flow experiment through a micro round tube of a diameter $100{\mu}m$. Velocity distributions of blood flow for rabbit were obtained. The viscosity profiles for shear rate were found at flowing condition. To provide hemorheological characteristics of blood flow, the viscosities for shear rate were evaluated. The viscosity of blood also steeply increase by decreasing shear rate resulting in Non-Newtonian flow, especially in low shear rate region caused by RBC rheological properties. The results show typical characteristics of Non-Newtonian characteristics from the results of velocity profile and viscosity for blood flow. From the inflection points, cell free layer and two-phase flow consisted with plasma and suspensions including RBCs can be separated.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.375-401
• /
• 2014

It is generally accepted that material heterogeneity has a great influence on the deformation, strength, damage and failure modes of rock. This paper presents numerical simulation on rock failure process based on the characterization of rock heterogeneity by using a digital image processing (DIP) technique. The actual heterogeneity of rock at mesoscopic scale (characterized as minerals) is retrieved by using a vectorization transformation method based on the digital image of rock surface, and it is imported into a well-established numerical code Rock Failure Process Analysis (RFPA), in order to examine the effect of rock heterogeneity on the rock failure process. In this regard, the numerical model of rock could be built based on the actual characterization of the heterogeneity of rock at the meso-scale. Then, the images of granite are taken as an example to illustrate the implementation of DIP technique in simulating the rock failure process. Three numerical examples are presented to demonstrate the impact of actual rock heterogeneity due to spatial distribution of constituent mineral grains (e.g., feldspar, quartz and mica) on the macro-scale mechanical response, and the associated rock failure mechanism at the meso-scale level is clarified. The numerical results indicate that the shape and distribution of constituent mineral grains have a pronounced impact on stress distribution and concentration, which may further control the failure process of granite. The proposed method provides an efficient tool for studying the mechanical behaviors of heterogeneous rock and rock-like materials whose failure processes are strongly influenced by material heterogeneity.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.