• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.108-113
• /
• 2016

A miniaturized lab-scale Cu plating cell for the metallization of electronic devices was fabricated and its deposit uniformity and profile were investigated. The plating cell was composed of a polypropylene bath, an electrolyte ejection nozzle which is connected to a circulation pump. In deposit uniformity evaluation, thicker deposit was found on the bottom and sides of substrate, indicating the spatial variation of deposit thickness was governed by the tertiary current distribution which is related to $Cu^{2+}$ transport. The surface morphology of Cu deposit inside photo-resist pattern was controlled by organic additives in the electrolyte as it led to the flatter top surface compared to convex surface which was observed in the deposit grown without organic additives.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.545-549
• /
• 1993

an alignment system in the X-and Y-directions an X-Y-.theta. stage driven by piezoelectric actuators is presented. A pair of quadruple gratings and a quadruple photo-detector are used. The difference between the two 0-th order moire signals in reflection with a relative spatial phase of 180.deg. is used in each direction to control the alignment of the X-Y-.theta. stage. The stage is aligned at the position where the difference is zero. The quadruple gratings are 10 mm * 10 mm, and of a binary square-type with a 1/2 duty cycle. Their pitches are 16 .mu.m. Alignment accuracy of .+-.20nm was obtained in this system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.792-797
• /
• 2002

In the following paper two algorithms, suitable for the analysis of panchromatic data as provided by KOMPSAT-1 will be presented. One is a texture analysis which will be used to create a settlement mask based on the variations of gray values. The other is a fusion algorithm which allows the combination of high resolution panchromatic data with medium resolution multispectral data. The procedure developed for this purpose uses the spatial information present in the high resolution image to spatially enhance the low resolution image, while keeping the distortion of the multispectral information to a minimum. This makes it possible to use the fusion results for standard multispecatral classification routines. The procedures presented here can be automated to large extent, making them suitable for a standard processing routine of satellite data.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1576-1583
• /
• 1989

In this paper, we describe real-time optical implementation of the Hopfield neural network model for two-dimensional associative memory by using commercial LCTV and Multifocus For real-time processing capability, we use LCTV as a memory mask and a input spatial light modulator. Inner product between input pattern and memory matrix is processed by the multifocus holographic lens. The output signal is then electrically thresholded fed back to the system input by 2-D CCD camera. From the good experimental results, the proposed system can be applied to pattern recognition and machine vision in future.

• 대한전자공학회논문지
• /
• 제26권1호
• /
• pp.10-19
• /
• 1989

본 논문에서는 깊이데이타를 이용한 물체의 조형방법을 제안한다. 입력으로 들어온 깊이데이타에서 물체의 형상특징을 추출하기 위하여 $2{\times}2$ 마스크내에서 깊이변화율을 고려한 Z축 기울기를 정의하여 각각의 원시도형(primitive)마다 가지는 크기와 방향특성을 이용하여 표면을 분류한다. 또한 여러개의 원시도형들의 조합으로 되어있는 물체에서는 핵심점을 정의하여 각 원시도형을 분리한다. 나아가 표면영역들간의 공간상의 위치관계를 구하여 인식을 위한 원시도형들간의 상관관계를 추출하였으며 제안된 방법의 유용성을 실험에 의하여 입증한다.

• 한국레이저가공학회지
• /
• 제10권4호
• /
• pp.18-22
• /
• 2007

In this paper, we suggested the femtosecond laser processing using the mask which makes Gaussian spatial beam distribution to a normalized distribution by Fresenel diffraction. Holography pattern of the size of $320{\times}320{\mu}m^2$ on the Cr thin film on glass substrate with a pixel size of $5{\times}5{\mu}m^2$ was fabricated according to the pattern generated by the iterative Fourier transform algorithm(IFTA) algorithm. We analysed the damage threshold with an assumption the power distribution as Gaussian profile as 45 $mJ/cm^2$. The regenerated image of letters through the diffractive pattern was well recognized at the screen.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.259-264
• /
• 2007

According to the development and wide use of broad band internet etc., diverse application technologies using large capacity data such as images have been progressed and in these systems, for accurate acquisition and precise applications of an original signal, the degradation phenomenon generated in the transmission process etc. should be removed. Noises have become known as the main cause of the degradation phenomenon and especially Gaussian noise represents characteristics occurring dependently in image signals and degrades detail information such as edge. In this paper, we removed Gaussian noise using a subdivided nonlinear function according to a threshold value and analyzed the histogram acquired from an edge image to establish a threshold value adaptively, and strengthened detail information of image by using the postprocessing. In simulation results, the proposed method represented excellent performance from comparison of MSE with existing methods.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.139-146
• /
• 2013

This paper proposes a new spatial filtering approach for increasing the depth-of-field (DOF) of imaging systems, which is very useful for obtaining sharp images for a wide range of axial positions of the object. Many different techniques have been reported to increase the depth of field. However the main advantage in our method is its simplicity, since we propose the use of purely absorbing beam-shaping elements, which allows a high focal depth with a minimum modification of the optical architecture. In the filter design, we have used the analogy between the axial behavior of a system with spherical aberration and the transverse impulse response of a 1D defocused system. This allowed us the design of a ring-shaded filter. Finally, experimental verification of the theoretical statements is also provided.

• 한국지리정보학회지
• /
• 제14권3호
• /
• pp.223-235
• /
• 2011

OLS 회귀분석은 환경적 형평성과 도시 삶의 질의 공간적 관계를 밝히기 위하여 사용되어 질수 있지만, 이러한 전역적 방법은 그 공간적 관계에 있어서 국지적 변이를 설명할 수 없다. 이들 지리적 변이를 밝혀 내기 위해서는 반드시 국지적 방법을 사용해야 한다. 이러한 맥락에서, 본 논문은 국지적 방법인 지리적 가중회귀분석(GWR)을 이용하여 애틀란타 대도시권에서 환경적 형평성과 도시 삶의 질간의 공간적 변이관계를 탐색하고자 한다. 환경적 형평성과 도시 삶의 질은 GIS와 원격탐사의 통합적 방법에 의하여 측정되었다. 연구결과에 따르면, 애틀란타 대도시권에서 환경적 형평성과 도시 삶의 질의 공간적 관계는 일반적으로 유의적인 부의 관계가 있었다. 또한, 환경적 형평성과 도시 삶의 질의 관계는 공간상에서 상당히 변이하고, 전역적 OLS 모델 보다 GWR 모델이 이러한 공간적 변이관계를 더 잘 설명할 수 있는 것으로 나타났다.

• 천문학회보
• /
• 제40권1호
• /
• pp.53.2-53.2
• /
• 2015

Fiber Bragg gratings (FBGs) are the most compact and reliable method of suppressing atmospheric emission lines in the infrared for ground-based telescopes. It has been proved that real FBGs based filters were able to eliminate 63 bright sky lines with minimal interline losses in 2011 (GNOSIS). Inscribing FBGs on multi-core fibers offers advantages. Compared to arrays of individual SMFs, the multi-core fiber Bragg grating (MCFBG) is greatly reduced in size, resistant to damage, simple to fabricate, and easy to taper into a photonics lantern (PRAXIS). Multi-mode fibers should be used and the number of modes has to be large enough to capture a sufficient amount of light from the telescope. However, the fiber Bragg gratings can only be inscribed in the single-mode fiber. A photonic lantern bi-directionally converts multi-mode to single-mode. The number of cores in MCFBGs corresponds to the mode. For a writing system consisting of a single ultra-violet (UV) laser and phase mask, the standard writing method is insufficient to produce uniform MCFBGs due to the spatial variations of the field at each core within the fiber. Most significant technical challenges are consequences of the side-on illumination of the fiber. Firstly, the fiber cladding acts as a cylindrical lens, narrowing the incident beam as it passes through the air-cladding interface. Consequently, cores receive reduced or zero illumination, while the focusing induces variations in the power at those that are exposed. The second effect is the shadowing of the furthest cores by the cores nearest to the light source. Due to a higher refractive index of cores than the cladding, diffraction occurs at each core-cladding interface as well as cores absorb the light. As a result, any core that is located directly behind another in the beam path is underexposed or exposed to a distorted interference pattern from what phase mask originally generates. Technologies are discussed to overcome the problems and recent experimental results are presented as well as simulation results.