• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.24-28
• /
• 1997

Diamond deposition by muti-cathode DC PACVD has been investigated. Five cathodes were independently connected to their own DC power supplies. The voltage and current of each cathods were varied up to 700 V and 3.5 A, respectively. The plasma formation and the diamond deposition behaviour on a substrate of 3 inch in diameter were investigated by optical emission spectroscopy, SEM and Raman spectroscopy. The plasma formed by five cathodes was non-uniform, which was depended on the geometry of cathods array. The growth rate and the quality of diamond film were closely related to the spatial distribution of the plasma.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.597-600
• /
• 2007

The address and sustain discharge characteristics in plasma display panels (PDPs) are investigated and compared by the optical emission spectroscopy using the ICCD and Vt close-curve analysis. The observations on the xenon (Xe) emission show that the spatial and temporal evolutions in the first sustain discharge are quite different from those in the address and the other sustain discharges. The striation found in the conventional sustain discharge doesn't occur in the first sustain discharge. These different discharge behaviors are explained by employing the Vt close-curve.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.406-408
• /
• 2018

도시 구조물의 대형화 고층화 복잡화로 인해 안전관리 어려움이 증가하고 있으며 화재 발생시 인명 및 재산 피해가 급증하고 있다. 이를 해결하기 위해 재난관리에 도시 구조물의 공간정보를 활용하는 필요성이 대두되고 있지만 관련 연구가 미흡한 실정이다. 본 논문에서는 화재 조사, 진압 및 구조 구급 등의 소방활동에 실내 공간정보를 활용하여 다양한 소방활동 서비스를 제공하는 방안을 제안하고자 한다. 해결해야 할 연구 문제와 이를 해결하기 위한 접근 방법 및 접근 방법과 관련된 연구 안건을 자세히 기술한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.344-347
• /
• 2008

본 논문에서 무선 방송 환경에서 효율적으로 스카이라인 질의를 처리하는 기법을 제안한다. 무선 방송 환경의 순차적 데이터 접근 특성 때문에 기존의 기법을 적용할 경우 접근시간 및 튜닝시간에 큰 제약이 있다. 이를 해결하고 모바일 사용자가 에너지 효율적으로 스카이라인 질의를 처리하기 위하여 DSI(Distributed Spatial Index) 구조에 기반한 SOA(Skyline On Air) 알고리즘을 제안하였다. 제안된 기법은 접근시간이 한 주기의 방송 프로그램 길이를 넘지 않도록 한다. 또한 성능 평가를 통하여 제안 된 기법이 접근시간 및 튜닝시간 측면에서 효율적임을 확인하였다.

• Journal of the Korean earth science society
• /
• v.36 no.2
• /
• pp.158-170
• /
• 2015

This study evaluates the wind speed forecast near the surface layer using the Weather Research Forecasting with Large Eddy Simulation (WRF-LES) model in order to compare the planetary boundary layer (PBL) parameterization with the LES model in terms of different spatial resolution. A numerical simulation is conducted with 1-km and 333-m horizontal resolution over the Gangwon Province including complex mountains and coastal region. The numerical experiments with 1-km and 333-m horizontal resolution employ PBL parameterization and LES, respectively. The wind speed forecast in mountainous region shows a better forecast performance in 333-m experiment than in 1-km, while wind speed in coastal region is similar to the observation in 1-km spatial resolution experiment. Therefore, LES experiment, which directly simulates the turbulence process near the surface layer, contributes to more accurate forecast of surface wind speed in mountainous regions.

• Korean Journal of Remote Sensing
• /
• v.27 no.6
• /
• pp.703-715
• /
• 2011

Forests have been considered one of the most important ecosystems on the earth, affecting the lives and environment. The sustainable forest management requires accurate and timely information of forest and tree parameters. Appropriately interpreted remotely sensed imagery can provide quantitative data for deriving forest information temporally and spatially. Especially, analysis of individual tree detection and crown delineation is significant issue, because individual trees are basic units for forest management. Individual trees in aerial imagery have reflectance characteristics according to tree species, crown shape and hierarchical status. This study suggested a method that identified individual trees and delineated crown boundaries through adopting gradient method algorithm to amplified greenness data using red and green band of aerial imagery. The amplification of specific band value improved possibility of detecting individual trees, and gradient method algorithm was performed to apply to identify individual tree tops. Additionally, tree crown boundaries were explored using spectral intensity pattern created by geometric characteristic of tree crown shape. Finally, accuracy of result derived from this method was evaluated by comparing with the reference data about individual tree location, number and crown boundary acquired by visual interpretation. The accuracy ($\hat{K}$) of suggested method to identify individual trees was 0.89 and adequate window size for delineating crown boundaries was $19{\times}19$ window size (maximum crown size: 9.4m) with accuracy ($\hat{K}$) at 0.80.

• Journal of Biomedical Engineering Research
• /
• v.30 no.5
• /
• pp.428-437
• /
• 2009

The Performance research about EEG-BCI algorithm in BCI-naive subjects is very important for evaluating the applicability to the public. We analyzed the result of the performance evaluation experiment about the EEG-BCI algorithm in BCI-naive subjects on three different aspects. The EEG-BCI algorithm used in this paper is composed of the common spatial pattern(CSP) and the least square linear classifier. CSP is used for obtaining the characteristic of event related desynchronization, and the least square linear classifier classifies the motor imagery EEG data of the left hand or right hand. The performance evaluation experiments about EEG-BCI algorithm is conducted for 40 men and women whose age are 23.87${\pm}$2.47. The performance evaluation about EEG-BCI algorithm in BCI-naive subjects is analyzed in terms of the accuracy, the relation between the information transfer rate and the accuracy, and the performance changes when the different types of cue were used in the training session and testing session. On the result of experiment, BCI-naive group has about 20% subjects whose accuracy exceed 0.7. And this results of the accuracy were not effected significantly by the types of cue. The Information transfer rate is in the inverse proportion to the accuracy. And the accuracy shows the severe deterioration when the motor imagery is less then 2 seconds.

• Korean Journal of Materials Research
• /
• v.23 no.8
• /
• pp.405-422
• /
• 2013

Atomic layer deposition(ALD) is a promising deposition method and has been studied and used in many different areas, such as displays, semiconductors, batteries, and solar cells. This method, which is based on a self-limiting growth mechanism, facilitates precise control of film thickness at an atomic level and enables deposition on large and three dimensionally complex surfaces. For instance, ALD technology is very useful for 3D and high aspect ratio structures such as dynamic random access memory(DRAM) and other non-volatile memories(NVMs). In addition, a variety of materials can be deposited using ALD, oxides, nitrides, sulfides, metals, and so on. In conventional ALD, the source and reactant are pulsed into the reaction chamber alternately, one at a time, separated by purging or evacuation periods. Thermal ALD and metal organic ALD are also used, but these have their own advantages and disadvantages. Furthermore, plasma-enhanced ALD has come into the spotlight because it has more freedom in processing conditions; it uses highly reactive radicals and ions and for a wider range of material properties than the conventional thermal ALD, which uses $H_2O$ and $O_3$ as an oxygen reactant. However, the throughput is still a challenge for a current time divided ALD system. Therefore, a new concept of ALD, fast ALD or spatial ALD, which separate half-reactions spatially, has been extensively under development. In this paper, we reviewed these various kinds of ALD equipment, possible materials using ALD, and recent ALD research applications mainly focused on materials required in microelectronics.

• Spatial Information Research
• /
• v.21 no.5
• /
• pp.7-14
• /
• 2013

Recently, BIM(Building Information Model) is widely applied to all stages of SOC (Social Overhead Capital)facilities life cycle from planning to maintenance. While BIM is an analysis tool focussing the inner space of facilities, GIS is principally applied to analyzing relationship between facilities. Therefore, integrating BIM and GIS, we expect to get a potential synergy effect in aspects of effective information management and various analysis for SOC facilities. This paper deals with prioritizing SOC facilities for applying BIM/GIS integrating platform to local governments. First, investigate facilities required by law, and identify SOC facilities suitable for SOC characteristics. Second, analyze the effectiveness and applicability of BIM/GIS integrating platform applying each facility. For the purpose, we quantify effectiveness and applicability in aspects of UIS management and GIS functions. Lastly, prioritize the SOC facilities applying BIM/GIS integrating platform.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.704-715
• /
• 2012

To examine temporal and spatial variation in salinity and nutrients in the shallow pore water of intertidal sandflats, we measured salinity and nutrient concentrations (dissolved inorganic nitrogen [DIN], phosphorus [DIP], and silicate [DSi]) in pore water of the intertidal zone along the coastline of Jeju Island at two and/or three month intervals from May 2009 to December 2010. Geochemical parameters (grain size, ignition loss [IL], chemical oxygen demand [COD], and acid volatile sulfur [AVS]) in sediment were also investigated. The surface sediments in intertidal sandflats of Jeju Island were mainly composed of sand, slightly gravelly sand and gravelly sand, with a range of mean grain size from 0.5 to 2.5 ${\O}$. Concentrations of IL and COD in sediment were higher along the eastern coast, as compared to the western coast, due to differences in biogenic sediment composition. Salinity and nutrient concentrations in pore water were markedly different across time and space during rainy seasons, whereas concentrations were temporally and spatially more stable during dry seasons. These results suggest that salinity and nutrient concentrations in pore water depend on the advective flow of fresh groundwater. We also observed an imbalance of the DIN/DIP ratio in pore water due to the influence of contaminated sources of DIN. In particular, nutrient concentrations during rainy and dry seasons were characterized by high DIN/DIP ratios (mean-127) and low DIN/DIP ratios (mean-10), respectively, relative to the Redfield ratio (16) in offshore seawater. Such an imbalance of DIN/DIP ratios in pore water can affect the coastal ecosystem and appears to cause outbreaks of benthic seaweed along the coastline of Jeju Island.