• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.8-13
• /
• 2011

고강도 콘크리트는 화재 시 고온에 노출되어 폭렬현상이 발생된다. 폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 것으로 퍼라이트와 폴리프로필렌 섬유로 경량모르타르를 제조하여 그 역학적 성상을 파악하는데 있다. 이에 따른 실험인자로는 물시멘트비, 골재시멘트비, 폴리프로필렌 섬유 첨가량이다. 연구결과 퍼라이트와 폴리프로필렌 섬유를 첨가함으로서 모르타르의 공극구조를 변화시킬 수 있었으며, 단위중량을 감소시킬 수 있었다. 또한, 고강도 콘크리트의 내화피복재로서 경량모르타르를 사용할 수 있는 가능성을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.928-934
• /
• 2008

Resently, Fiber Reinforced Concrete is used for not only preventing crack of concrete but also reinforcing general methods. Steel Fiber and PP(poly-propylene) Fiber are usually used as fiber reinforced materials. However, using these materials for shotcrete on Railway tunnel can cause some problems such as damage of pressure hose and shotcrete rebound. In addition, Steel fiber is an expensive material and it can cause safety problems during applying to shotcrete. PP Fiber can cause a problem in fiber balling during applying to shotcrete railway tunnel construction. A purpose of the research is applying a development of PET(Poly Etylene Terephtalate) fiber by recycling pet bottles to the shotcrete tunnel exposed to explosion spalling. To investigate the reinforcement effect of the PET fiber, some basic tests are accomplished to physical properties and explosion spalling by fire. As a result of the tests, a concrete mixing the PET fiber has stronger resistance effect in the explosion spalling by high temperature than another strong fiber concrete does, and that the former concrete is also equal or more effective on the result of the above tests to physical properties like compression and strain than the latter one is demonstrated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.283-284
• /
• 2009

본 연구는 3 시간 내화실험 후 PP 섬유를 혼입한 초고강도콘크리트의 폭렬 저항성을 파악하는데 그 목적이 있다. 강도 100MPa 와 150MPa 콘크리트에 PP 섬유 혼입량을 조절하여 실험을 하였다. 실험결과 충분한 양의 PP 섬유를 혼입하였을 때 폭렬 저항성을 갖는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.423-430
• /
• 2005

Fire accidents in underground space may bring much loss of lives as well as properties and result in catastrophic disasters. This study aimed to manufacture the high-temperature furnace capable of simulating fire scenarios (RABT and RWS) and carry out the preliminary fire tests to evaluate fire-induced damage in underground structures. Specimens used in the fire tests were the concrete segments generally used in shield TBM tunnels. The simulated fire scenario was set to the RABT curve that is the most representative fire scenario in underground space. From the fire tests, the spalling was estimated to reach approximately 20cm from the surface exposed to fire. In addition, from the observation of core specimens obtained after fire tests, the deteriorated zone of unspalled specimens amounted to approximately 10cm from the surface of spalling.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.32-33
• /
• 2014

In this study, evaluation on weight loss properties of spalling control fiber with heating rates has been conducted. For evaluation of this study, 3types of organic fibers(Polyethylene, Polypropylene, Nylon) are used as spaling control fiber. Also, to evaluate the effect of heating rate to spallin control fiber, heating rates are set as 10, 25℃/min. As a result, the start time of weight loss of fiber with various heating rate was delayed as heating rate was increased.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.81-85
• /
• 2009

In the recent years, the high strength concrete has increasingly been used according to extending market of tall buildings. However, Ministry of Land, transport and Maritime Affairs was established by law with an alternative plan after June 2008 because of the weakness of high strength concrete accompanied spalling phenomena in fire. The mix design of concrete has to properly meet standards which are the spalling resistance of concrete and limited temperature of steel reinforcement. The fire proof concrete mixed fiber has widely been used to meet spalling safety on the many construction sites, the most researches about the fire proof concrete mixed fiber had being carried out focused on fire resistance, compressive strength and cast in place of concrete. But the most important thing is column shortening used the fire proof concrete within the vertical members. In this paper, the fire proof concrete filled spalling safety standards was experimented by required material when the column shortening is revised between normal concrete and fire proof concrete mixed fiber and then the results have done a comparative analysis. Also, The paper aimed to indicate a basic data for revision of column shortening of fire proof concrete.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.100-106
• /
• 2014

고강도 콘크리트는 구조적으로 우수하며 사용성 및 내구성이 뛰어나 건축물에서 그 활용성이 꾸준히 증가하고 있다. 그러나 화재처럼 고온에서 고강도 콘크리트는 폭렬이 발생될 가능성이 있으며, 폭렬 원인은 콘크리트 내부의 수증기압이 가장 큰 원인으로 알려져 있다. 콘크리트의 폭렬을 제어할 수 있는 일반적인 방법은 콘크리트 표면에 내화피복을 사용하여 화재 시 부재의 온도상승을 억제하는 방법이 있다. 이에 따라 본 연구에서는 각종 골재와 유기섬유를 사용하여 콘크리트 내화피복용 모르타르를 제조하고 그 고온 성상을 파악하고자 한다. 실험결과 퍼라이트와 폴리프로필렌 섬유를 사용한 모르타르는 내부공극과 밀도를 변화시켜 내부온도 상승을 지연시킨다. 그 결과 고강도 콘크리트의 폭렬을 방지할 수 있는 내화 피복재로 활용 가능하다.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.183-193
• /
• 2012

Compressive property of high strength concrete with amorphous metal fibers subject to high temperature has been investigated. The measure of this investigation includes explosive spalling, weight loss, residual compressive strength, strain at peak stress, elastic modulus, and residual energy absorption capacity after exposure to $400^{\circ}C$, $600^{\circ}C$and $800^{\circ}C$. In addition to the amorphous metal fiber, two other types of fibers (polypropylene fiber and hooked-end steel fiber) were also included in this investigation for comparison. The experimental program was conducted with high strength concrete using several combinations of the fiber types. The testing result shows that the concrete with amorphous metal fibers plus polypropylene fibers shows a superior behavior than those using other combination or single fiber type ingredient.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.481-484
• /
• 2006

This study investigates the engineering and fire endurance properties of ultra high strength concrete. The mixture proportions with water to binder ratios (W/B) of 0.15 and 0.25 consist of various adding ratios, such as 0, 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3 percent respectively, of polypropylene (PP) fiber. As for the parameters of specimens, fluidity, compressive strength and unloading fire test were carried out. Test showed that an increase of fiber contents had the favorable properties in fire endurance performance; specimens in W/B 15% required 0.3vol% of PP fiber and specimens in W/B 25% needed only 0.1vol% to prevent spalling.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.19-22
• /
• 2007

This study discussed the prevention of the spalling and improvement of the fire resistance performance how to fill up lightweight foamed concrete on high strength RC column attached with the stone panel. The destructive spalling extremely occur caused by sudden high temperature and increased vapor pressure corresponding to falling the ston panel at all RC column, and the steel bar is exposed. The stone panel fall off about 30 minutes and spalling occur about 70 minutes on Plan RC column, fire endurance paint, and fire endurance mortar, so it can be confirmed that fire endurance paint and mortar, which is used as fire endurance material, are not effective. In the other side, it can be protected from fire about $120{\sim}140$ minutes when the lightweight foamed concrete is used as fire endurance material. For the weight loss after the fire test, plain is 33, fire endurance paint is 37%, and fire endurance mortar s 40.7%. And W/B 60%-3 is 53.4%, 60%-1.5 is 40.1%,65%-3 is 39.4%, and 65%-1.5% is 47.1. Overall, the weight loss of the plain is lower than that of the lightweight foamed concrete.