• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1079-1088
• /
• 2015

본 연구는 한국항공우주연구원에서 개발한 위성종합설계 SW 내의 복사계수 계산 프로그램의 병렬화 및 성능향상에 대해 논의한다. 복사계수는 복사열전달이 포함된 인공위성의 열해석을 수행하기 위한 필수적인 전초 단계로서 그 자체적인 계산량 또한 상당하다. 특히 위성 궤도상 시간에 따라 태양전지판과 본체의 상대변위가 변하기에 시간 별 독립적인 복사계수의 계산이 필요하다. 본 논문은 복사형상계수 병렬화 방법과 그 성능, KD-Tree 기반 차폐 탐색 알고리즘 및 태양전지판과 본체의 상대변위 변화에 따른 부분 복사형상계수 행렬 갱신이라고 지칭하는 계산량 저감 기법에 대해 논한다.

• 대한전자공학회논문지SD
• /
• 제44권5호
• /
• pp.42-49
• /
• 2007

본 논문에서는 열전도 환경하의 MCM과 진공에서 작동하는 우주전자 장비의 신뢰도 최적화를 위한 부품 배치 연구에 관해 기술하고 있다. 최적배치를 위해 초기 부품 배치 후 FDM을 solver로 이용하여 부품의 접합온도를 계산하였으며 접합온도를 이용하여 전자장치의 신뢰도를 예측한 후 시뮬레이티드 어닐링 방법을 통해 신뢰도 최적배치 결과가 기술되었다. 시뮬레이티드 어닐링 적용 시 흔들기는 부품 치환방식을 이용하였으며 온도 감소계수 및 열 평형 계수의 변화에 따른 시뮬레이션 결과를 기술하였으며 특히 장치의 고장률 최소화 목적함수와 평균 접합온도 최소화 목적함수에 대해 각 적용결과에 대한 비교분석을 통하여 새로운 신뢰도 최적화 접근방법을 제안하였다.

• Advances in aircraft and spacecraft science
• /
• 제5권6호
• /
• pp.691-729
• /
• 2018

In this paper the hygro-thermo-mechanical vibration and buckling behavior of embedded FG nano-plates are investigated. The Eringen's and Gurtin-Murdoch theories are applied to study the small scale and surface effects on frequencies and critical buckling loads. The effective material properties are modeled using Mori-Tanaka homogenization scheme. On the base of RPT and HSDPT plate theories, the Hamilton's principle is employed to derive governing equations. Using iterative and GDQ methods the governing equations are solved and the influence of different parameters on natural frequencies and critical buckling loads are studied.

• Advances in aircraft and spacecraft science
• /
• 제2권2호
• /
• pp.109-124
• /
• 2015

This paper deals with the aerodynamic and aerothermodynamic trade-off analysis of a hypersonic flying test bed. Such vehicle will have to be launched with an expendable launcher and shall re-enter the Earth atmosphere allowing to perform several experiments on critical re-entry phenomena. The demonstrator under study is a re-entry space glider characterized by a relatively simple vehicle architecture able to validate hypersonic aerothermodynamic design database and passenger experiments, including thermal shield and hot structures. A summary review of the aerodynamic characteristics of two flying test bed concepts, compliant with a phase-A design level, has been provided hereinafter. Several design results, based both on engineering approach and computational fluid dynamics, are reported and discussed in the paper.

• Advances in aircraft and spacecraft science
• /
• 제8권4호
• /
• pp.289-302
• /
• 2021

Ensuring flight safety for passengers as well as crew is the most important aspect of modern aviation, and in order to achieve this, it is necessary to be able to forecast the durability of individual components. The present contribution illustrates the results of a computational analysis to determine the possibility of analysing the prediction of bearing durability in on-board rotating equipment from the point of view of thermal fatigue.In this study, a method developed at the Air Force Institute of Technology was used for analysis, which allowed to determine the bearing durability from the flight altitude profile. Two aircraft have been chosen for analysis - a military M-28 and a civilian Embraer. As a result of the analysis were obtained: the bearing durability in on-board rotating devices, average operation time between failures, as well as failure rate. In conclusion, the practical applicability of this approach is demonstrated by the fact that even with a limited number of flight parameters, it is possible to estimate bearing durability and increase flight safety by regular inspections.

• Advances in aircraft and spacecraft science
• /
• 제4권1호
• /
• pp.37-52
• /
• 2017

Gas turbines operating in dusty or sandy environment polluted with micron-sized solid particles are highly prone to blade surface erosion damage in compressor stages and molten sand attack in the hot-sections of turbine stages. Commercial/Military fixed-wing aircraft engines and helicopter engines often have to operate over sandy terrains in the middle eastern countries or in volcanic zones; on the other hand gas turbines in marine applications are subjected to salt spray, while the coal-burning industrial power generation turbines are subjected to fly-ash. The presence of solid particles in the working fluid medium has an adverse effect on the durability of these engines as well as performance. Typical turbine blade damages include blade coating wear, sand glazing, Calcia-Magnesia-Alumina-Silicate (CMAS) attack, oxidation, plugged cooling holes, all of which can cause rapid performance deterioration including loss of aircraft. The focus of this research work is to simulate particle-surface kinetic interaction on typical turbomachinery material targets using non-linear dynamic impact analysis. The objective of this research is to understand the interfacial kinetic behaviors that can provide insights into the physics of particle interactions and to enable leap ahead technologies in material choices and to develop sand-phobic thermal barrier coatings for turbine blades. This paper outlines the research efforts at the U.S Army Research Laboratory to come up with novel turbine blade multifunctional protective coatings that are sand-phobic, sand impact wear resistant, as well as have very low thermal conductivity for improved performance of future gas turbine engines. The research scope includes development of protective coatings for both nickel-based super alloys and ceramic matrix composites.

• Advances in aircraft and spacecraft science
• /
• 제4권6호
• /
• pp.729-744
• /
• 2017

This investigation highlights rationale of electrically conductive nano adhesives for its essential application for Electromagnetic Interference (EMI) Shielding in satellites and Lightning Strike Protection in aircrafts. Carbon Nano Fibres (CNF) were functionalized by electroless process using Tollen's reagent and by Plasma Enhanced Chemical Vapour Deposition (PECVD) process by depositing silver on CNF. Different weight percentage of CNF and silver coated CNF were reinforced into the epoxy resin hardener system. Scanning Electron Microscopy (SEM) micrographs clearly show the presence of CNF in the epoxy matrix, thus giving enough evidence to show that dispersion is uniform. Transmission Electron Microscopy (TEM) studies reveal that there is uniform deposition of silver on CNF resulting in significant improvement in interfacial adhesion with epoxy matrix. There is a considerable increase in thermal stability of the conductive nano adhesive demonstrated by Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Four probe conductivity meters clearly shows a substantial increase in the electrical conductivity of silver coated CNF-epoxy composite compared to non-coated CNF-epoxy composite. Tensile test results clearly show that there is a significant increase in the tensile strength of silver coated CNF-composites compared to non-coated CNF-epoxy composites. Consequently, this technology is highly desirable for satellites and EMI Shielding and will open a new dimension in space research.

• Advances in aircraft and spacecraft science
• /
• 제7권2호
• /
• pp.135-149
• /
• 2020

In the current paper, a generalization of the results of Zhao et al. (2008) on a new design of C/C composite multidisc brake system is presented. The purpose of this paper is to study the effect of thermal sensitivity of Carbon/Carbon (C/C) composite material on the temperature distributions, deformation, and stress during braking. In this regard, a transient temperature-displacement coupled analysis for C/C composite brake discs with frictional heat generation under simulated operating conditions is performed. An axisymmetric model for brake system is used for the finite element analysis according to the theory of energy transformation and transportation. The transient temperature distributions on the friction surfaces, deformation, and stress are obtained. To check the validity, the results are corroborated with other solutions available in the literature, wherever possible. The current study could be used as a guide in the initial design of a high performance multidisc brake system.

• Composites Research
• /
• 제33권5호
• /
• pp.309-314
• /
• 2020

우주 발사체용 극저온 추진제 탱크 경량화를 위한 고분자복합재료의 적용은 방향성을 가지는 복합재의 특성으로 인해 기체 투과도 성능 규명이 선행되어야 한다. 이러한 특성은 탱크 안정성 및 탑재 연료량 산정과 같은 성능 및 경제성과 직결된 지표다. 본 연구에서는 구조해석을 통해 도출된 극저온 추진제 탱크의 구조에 대하여 2가지 두께에 대한 투과도를 실험적으로 평가하였으며, 나아가 극저온-상온 환경에 노출된 열충격 횟수에 따른 시편의 비가역적 특성에 대한 투과도 분석 결과를 포함한다. 연구에 사용된 복합재는 두께에 반비례하며 열충격 횟수에 비례하는 투과도 특성을 보였으며, 우주 발사체용 극저온 추진제 탱크 소재로 적절한 투과도 성능을 가지는 것을 검증하였다.

• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.338-344
• /
• 2018

달 주위를 공전하는 탐사위성이나 달착륙선 및 월면차의 열설계에 필요한 환경 인자로써 달 표면온도가 중요하며, 본 연구에서는 에너지방정식을 단순화한 집중계 해석모델을 통하여 온도를 예측하였다. 에너지방정식의 해석에 필요한 물리적 값들은 기하학적 형상을 고려하여 유도하고, 기존의 연구결과에 제시된 값들을 사용하였다. 달 표토층의 가장 중요한 열적 물성치인 면적비열은 LRO에 탑재된 Diviner의 측정온도 분석을 통하여 추출하였으며, 해석모델에 적용함으로써 값을 추정하였다. 수치적분을 통하여 예측한 달 표면온도 분포는 달탐사위성 등의 열설계에 적용할 수 있을 정도의 충분한 정확도를 갖으며, 본 연구에서 제시한 방법을 심화시킨다면 더욱 정확한 온도예측이 가능할 것이다.