• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.131-142
• /
• 2010

Due to the development of the Internet, Internet banking that we are liberated from time and space has evolved into banking system. So modern life became comfortable. However, Dysfunction (malicious Information leakage and hacking etc.) of the Internet development has become a serious social problem. According to this, The need for security is rapidly growing. In this paper, we proposed the Internet Banking Authentication System using a dual-channel in OTP(One Time Password) authentication. This technology is that A user transfer transaction information to Bank through one Internet channel then bank transfer transaction information to user using the registered mobile phone or smart phone. If user confirm transaction information then bank request user's OTP value. User create OTP value and transfer to bank and bank authenticate them throgth the ARS. If authentication is pass then transaction permitted. Security assessment that the proposed system, the security requirement that the confidentiality and integrity, authentication, repudiation of all of the features provide a key length is longer than the current Internet banking systems, such as using encryption, the security provided by the Financial Supervisory Service Level 1 rating can be applied to more than confirmed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.31-38
• /
• 2010

Bus manufacturers have tested and studied the dynamic collapse behavior of a bus body structure in rollover since UN ECE established ECE Regulation 66 to provide the requirement for the strength of bus structure. In spite of the costly cycles of practical tests, however, it is still a hard task to meet the rollover regulation by means of local reinforcements in the bus structure. Therefore it is necessary to develop a well designed strategy for the rollover strength implemented in the early stage of vehicle development. In this study, the suitable development method for each design stage from a component to complete body structure was considered to make a well-established development process of a bus body structure for rollover safety. For the efficient approach of the concept design stage, a numerical model based on the plastic hinge theory was used instead of detailed shell models. After setting up the concept design for the component size and geometry, the shell model was used to confirm and optimize the whole structure composition. The process developed in this study was practically used as an effective method to predict the rollover behavior of a new bus body structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.124-131
• /
• 2000

Rapid Prototyping(RP) models are no longer used only for design verification. Currently, parts built utilizing layer manufacturing technology can be employed as functional prototypes and as patterns or tools for different manufacturing processes such as vacuum casting, investment casting, injection molding, precise casting and sand casting. This trend of Rapid Prototyping application meets the requirement of concurrent engineering and its range covers a more spreaded area. The aim of this paper is saving the manufacturing lead time and cost of plastic parts having hollow space shapes used by prototype-car. Using rapid prototype patterns, made by the Selective Laser Sintering(SLS) technique, a new approach of manufacturing resin-based blow mold is discussed. It has a great potential fur making prototype-car parts with the batch size of under 200 parts, in case of rapid modification due to a subsequent design changes in developing stage. So, the process proposed in this research shows reduction of process time and manufacturing cost when compared with the conventional process such as a Zinc Alloy fur Stamping(ZAS) mold.

• Laser Solutions
• /
• v.15 no.3
• /
• pp.7-10
• /
• 2012

Dimensions (line/space) of circuits in IC substrates for high-end chips (e.g. CPU, etc.) are anticipated to decrease as small as $10{\mu}m/10{\mu}m$ in 2014. Since current etch-based circuit-patterning processes are not able to address the urgent requirement from industry, laser-based circuit patterning processes are under active research in which UV laser is used to engrave embedded circuits patterns into IC substrates. In this paper, we used a nanosecond UV laser to directly fabricate embedded circuit patterns into IC substrates with/without ceramic powders. In experiments, we engraved embedded circuit patterns with dimensions (width/depth) of abut $10{\mu}m/10{\mu}m$ and $6{\mu}m/6{\mu}m$ into the IC substrates. Due to the recoil pressure occurring during ablation, the circuit patterning of the IC substrates with ceramic powders showed the higher ablation rate.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.4
• /
• pp.103-111
• /
• 2013

In view of the fact that modern society has a range of origins causing disability, the population of acquired crippled is escalating. Hence, it is obligatory to facilitate every visitors can utilize facility equitably because public libraries are being changed to compounded service area. Particularly, it is urgent to manage space planning and accommodation by considerate the requirement traits of disabled who are a susceptible social group about knowledge information. This study analysis installation of toilet, the inevitable factor of hygiene facility, for disabled equipped in four different public libraries in Daegu with related on the standards of establishment for prolonged stay through advanced research and legislation connected on handicapped. This study provides foundation data to establish construction plan for disabled to alleviate inconvenience of taking service of public library, and to compose satisfying hygiene facility.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.100-107
• /
• 2005

As a result of this study, vitality of natural monuments (large trees) looks relatively good but they require continuous management. Also, the management for condition recovery and condition maintenance, and minimum measures are needed at least to avoid natural calamity. Major points induced are as follows : The first, although most of natural monument large trees showed favorable growth environment, most of them are aged and have dense twigs with requirement for weed trimming to remove complicated and unnecessary branches. In addition, as most of large trees grow alone in a large space with potential natural calamity, thus, minimum measures are required at least. Secondly, change in electric resistance in surveyed large trees was relatively favorable, however, large trees with soil covering showed high electric resistance and were found to have low vitality. As shown, this study was conducted to find out the measurement techniques of natural monuments, Basic foundation is suggested through the measurement of electric resistance, and the vitality of natural monuments; more accurate investigation will be remained for further discussion.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.77-87
• /
• 2015

For a floating offshore plant such as FPSO(Floating, Production, Storage, and Off-loading unit), various equipment should be installed in the restricted space, as compared with an onshore plant. The requirement for an optimal layout method of the plant has been increased in these days. Thus, a layout method of the floating offshore plant was proposed in this study. For this, an optimization problem for layout design was mathematically formulated, and then an optimization algorithm based on the genetic algorithm was implemented with C++ language in order to solve it. Finally, the proposed method was applied to an example of FPSO topsides. As a result, it was shown that the proposed method can be applied to layout design of the floating offshore plant such as FPSO.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1285-1295
• /
• 1999

본 논문은 방대한 크기의 볼륨 데이타를 효율적으로 렌더링하기 위한 셀 기반 웨이브릿 압축 방법을 제시한다. 이 방법은 볼륨을 작은 크기의 셀로 나누고, 셀 단위로 웨이브릿 변환을 한 다음 복원 순서에 따른 런-길이(run-length) 인코딩을 수행하여 높은 압축율과 빠른 복원을 제공한다. 또한 최근 복원 정보를 캐쉬 자료 구조에 효율적으로 저장하여 복원 시간을 단축시키고, 에러 임계치의 정규화로 비정규화된 웨이브릿 압축보다 빠른 속도로 정규화된 압축과 같은 고화질의 이미지를 생성하였다. 본 연구의 성능을 평가하기 위하여 {{}} 해상도의 볼륨 데이타를 압축하여 쉬어-？ 분해(shear-warp factorization) 알고리즘에 적용한 결과, 손상이 거의 없는 상태로 약 27:1의 압축율이 얻어졌고, 약 3초의 렌더링 시간이 걸렸다.Abstract This paper presents an efficient cell-based wavelet compression method of large volume data. Volume data is divided into individual cell of {{}} voxels, and then wavelet transform is applied to each cell. The transformed cell is run-length encoded according to the reconstruction order resulting in a fairly good compression ratio and fast reconstruction. A cache structure is used to speed up the process of reconstruction and a threshold normalization scheme is presented to produce a higher quality rendered image. We have combined our compression method with shear-warp factorization, which is an accelerated volume rendering algorithm. Experimental results show the space requirement to be about 27:1 and the rendering time to be about 3 seconds for {{}} data sets while preserving the quality of an image as like as using original data.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.439-450
• /
• 2013

In the case of a floating offshore structure such as FPSO(Floating, Production, Storage, and Offloading unit), many equipment should be installed in the limited space, as compared with an onshore structure. Recently, the requirement for an optimal layout method of the structure has been raised. Thus, a layout method of the floating offshore structure was proposed in this study. First, an optimization problem for layout design was mathematically formulated, and then an optimization algorithm was implemented based on the genetic algorithm in order to solve it. To evaluate the applicability of the proposed method, it was applied to examples ofFPSO topsides and an offshore wind turbine. As a result, it was shown that the proposed method can be applied to layout design of the floating offshore structure.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1125-1136
• /
• 2010

Lately there exist increasing demands for online abnormality monitoring over trajectory stream, which are obtained from moving object tracking devices. This problem is challenging due to the requirement of high speed data processing within limited space cost. In this paper, we present a FADA (Fuzzy Anomaly Detection Algorithm) which constructs normal profile by computing mobility feature information from the GPS (Global Positioning System) logs of mobile devices in MANETs (Mobile Ad-hoc Networks), computes a fuzzy dissimilarity between the current mobility feature information of the mobile device and the mobility feature information in the normal profile, and detects effectively the anomaly behaviors of mobile devices on the basis of the computed fuzzy dissimilarity. The performance of proposed FADA is evaluated through simulation.