• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.634-639
• /
• 2008

사회적 컴퓨팅(social computing)의 현상이 Web 2.0 공급사슬(supply chain)의 변화관점에서 새로운 변화의 단계를 맞이하고 있다. Web 2.0 플랫폼을 어떤 형태로 기업 활동에 활용할 것인가 하는 문제제기에 대하여 다양한 기업 활동의 변화사례가 발견되고 있다. 본 논문은 그와 같은 다양한 Web 2.0 환경 확산에 대한 기업 활동의 변화현상 중에서 Web 2.0 플랫폼을 기반으로 한 신제품개발(New Product Development) 사례연구를 통하여 진행한 결과를 반영하였다. 신제품 개발을 위한 플랫폼으로서 Web 2.0 의 협업적 환경을 설계하게 될 경우, 고객의 내재적 요구사항(latent requirement)이 제품개발에 효과적으로 반영될 수 있도록 하는 절차(process)가 기존의 제품개발방법론과 연관되어, 어떤 형태로 적용되고 개선되어 발전될 수 있는가에 대한 경험적 사례를 사례연구방법의 탐험적 경향을 활용하여 살펴보았다. 본 논문에서 다루어졌던 사례는 Web 2.0 플랫폼을 기반으로 사용자 창작 콘텐츠(User Created Content)를 생산하고 증가된 연세대학교 UCC의 양적 팽창에 의해서 수익모델이 발생하는 전형적인 Web 2.0 비즈니스 모델의 구조를 보여주는 경우였다. 본 연구를 통해서 사용자의 내재적 요구사향을 Web 2.0 기술특성을 통해서 참여적 사용자, 혹은 사용자 디자이너들의 적극적인 활동에 의해서 개선 및 구현해 가는 과정을 구체적 개발방법론의 틀로서 정착하려는 시도를 하였다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.3
• /
• pp.1-10
• /
• 1997

We present an approach to high-level synthesis for a specific target architecture-partitioned bus architecture. In this approach, we have specific goals of minimizing data transfer length and number of buses in addition to common synthesis goals such as minimizing number of control steps and satisfying given resource constraint. Minimizing data transfer length and number of buses can be very important design goals in the era of deep submicron technology in which interconnection delay and area dominate total delay and area of the chip to be designed. in partitioned bus architecture, to get optimal solution satisfying all the goals, partitioning of operation nodes among segments and ordering of segments as well as scheduling and allocation/binding must be considered concurrently. Those additional goals may impose much more complexity on the existing high-level synthesis problem. To cope with this increased complexity and get reasonable results, we have employed two ideas in ur synthesis approach-extension of the target architecture to alleviate bus requirement for data transfer and adoption of genetic algorithm as a principal methodology for design space exploration. Experimental results show that our approach is a promising high-level synthesis mehtodology for partitioned bus architecture.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

• Journal of Korean Society for Quality Management
• /
• v.39 no.4
• /
• pp.516-526
• /
• 2011

The AS9100 standard builds upon the ISO 9001:2000 quality management system requirements(in their entirety) and defines additional quality management system requirements for the aerospace industry. The 9100 standard on quality management system requirements is intended to be used at all levels of the supplier chain. The International Aerospace Quality Group has released a revision to 9100 for the aviation, space and defense industries. This change aims at improvement on quality, schedule and cost performance by adopting new requirements based on stakeholders' needs. This paper is to review how the AS9100 QMS Requirement has been established and improved, and to communicate the significant changes from AS9100, Rev. B to Rev. C focusing on reasons for revisions. The proposed schedule and considerations on the transition of the changes to Rev. C are also dealt with in this paper.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.240-249
• /
• 2009

HRSG(Heat Recovery Steam Generator) building is large enclosed structure included various heat sources. This building needs to appropriately keep internal air temperature for worker's safety and operability of control devices. In this study, ventilation analysis is performed to find proper ventilation method for temperature control. Ventilation analysis is applied to entire internal space of the building with standard $k-{\varepsilon}$ model and enhanced wall treatment because of large size of the structure. And the ventilation method is considered natural and forced convection with two louver structures which has damper or not. Louver structure affect directly air circulation in near HRSG and lower region of the building. Forced ventilation provides strong inertial force which cause upward airflow. From the analysis, it is found that design requirement for internal air temperature can be satisfied by forced ventilation method with louver structure without damper.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.277-280
• /
• 2006

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision-making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. However, the objectives of maximising the degree of technical performance, maximising the safety levels and minimising the costs incurred are usually in conflict, and the evaluation of the technical performance, safety and costs is always associated with uncertainties, especially for a novel system at the initial concept design stage. In this paper, a design-decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. It is a Multiple Attribute Decision-Making (MADM) or Multiple Criteria Decision Making (MCDM) framework, which provides a juxtaposition of cost, safety and technical performance of a system during evaluation to assist decision makers in selecting the winning design/procurement proposal that best satisfies the requirement in hand. An illustrative example is used to demonstrate the application of the proposed framework.

• Journal of the Korean housing association
• /
• v.8 no.3
• /
• pp.81-90
• /
• 1997

Cheju province exposes a separated residential culture compared to the mainland area. since it has its own unique climate, natural features. Therefore, this study tried to grasp the residential behavior. was based on the questionnaire to Cheju province people, using the approach by statistic verification. This study also focused and aimed on suggesting the basic data about housing plan which is appropriate to the climate. natural features requirement from inhabitants through the comparison and analysis between the mainland area and Cheju province. The results of the study are as follows; Firstly. the diversified applicative study on ‘Ol-rae’. ‘Ma-dang’, ‘Yoo-young’ and so forth that is traditional outside garden of Cheju is imperative, because in urban area people think traffics, vicinity, etc. are more significant, and in rural area people think occupying large outside space is more significant. Secondly. in the study of the degree of satisfaction on the housing, most of the people's was ‘neutral’ and in rural area quite a lot of negative reaction exposed. This is owing to the uniform introduction on residential style of the mainland area. Thirdly, housing plan should be considered family members' housing needs and provincial characteristics, meanwhile most of the people answered positively about the residential value which is considered very significant lately, for instance, security of privacy. appropriate plan for child's room.

• Journal of the Korean housing association
• /
• v.26 no.5
• /
• pp.53-60
• /
• 2015

This study is aimed at identifying and evaluating the current operating model of elderly group homes in Korea, which were introduced with the amendment to the Welfare of the Aged Act in 2008, based on a survey of 25 managers of such homes. There are several key themes identified in the evaluation of their operation in terms of human resources, service, space and finance. The number of employees at the homes complied with the applicable law, with the majority having more employees than the minimum legal requirement for the care of residents. A wide variety of service programs were offered for residents. Typically located within detached houses purchased on the first floor, the homes varied in size from 73 square meters to 560 square meters, with each having a distinctly residence-like atmosphere. The greatest challenge such homes face was a shortage of financial resources. Many struggled to operate because they have no other source of revenue than payments from residents. Consequently, to help promote elderly group homes, there needs to be state-level support for the view that providing assistance for self-sufficient elders can save social costs in the long run by delaying their transition to a physical state requiring constant nursing.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.824-830
• /
• 2003

RPA (Recursive Partition Averaging) method was proposed in order to improve the storage requirement and classification rate of the Memory Based Reasoning. That algorithm worked well in many areas, however, the major drawbacks of RPA are it's pattern averaging mechanism. We propose an adaptive OHC algorithm which uses the FPD(Feature-based Population Densimeter) to increase the classification rate of RPA. The proposed algorithm required only approximately 40% of memory space that is needed in k-NN classifier, and showed a superior classification performance to the RPA. Also, by reducing the number of stored patterns, it showed a excellent results in terms of classification when we compare it to the k-NN.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.359-366
• /
• 2013

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.