• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.74-85
• /
• 2002

The numerical experiment has been conducted to investigate the unsteady shock wave reflecting phenomena. The cell-vertex finite-volume, Roe's upwind flux difference splitting method with unstructured grid is implemented to solve unsteady Euler equations. The $4^{th}$-order Runge-Kutta method is applied for time integration. A linear reconstruction of the flux vector using the least-square method is applied to obtain the $2^{nd}$-order accuracy for the spatial derivatives. For a better resolution of the shock wave and slipline, the dynamic grid adaptation technique is adopted. The new concept of grid adaptation technique, which is much simpler than that of conventional techniques, is introduced for the current study. Three error indicators (divergence and curl of velocity, and gradient of density) are used for the grid adaptation procedure. Considering the quality of the solution and the numerical efficiency, the grid adaptation procedure was updated up to $2^{nd}$ level at every 20 time steps. For the convenience of comparison with other experimental and analytical results, the case of interaction between the straight incoming shock wave and a sharp wedge is simulated for various flow conditions. The numerical results show good agreement with other experimental and analytical results, in the shock wave reflecting structure, slipline, and the trajectory of the triple points. Some critical cases show disagreement with the analytical results, but these cases also have been proven to show hysteresis phenomena.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.344-345
• /
• 2018

In order to alleviate the negative impacts of harmonically distorted grid condition on grid-connect inverters, an optimal control design-based gain selection scheme of an LCL-filtered grid-connected inverter and its ability to compensate selective harmonics are presented in this paper. By incorporating resonant terms into the control structure in the state-space to provide infinity gain at selected frequencies, the proposed control offers an excellent steady-state response even under distorted grid voltage. The proposed control scheme is achieved by using a state feedback controller for stabilization purpose and by augmenting the resonant terms as well as intergral term into a control structure for reference tracking and harmonic compensation. Furthermore, the optimal linear quadratic control approach is adopted for choosing an optimal feedback gain to ensure an asymptotic stability of the whole system. A discrete-time full state observer is also introduced into the proposed control scheme for the purpose of reducing a total number of sensors used in the inverter system. The simulation results are given to prove the effectiveness and validity of the proposed control scheme.

• Journal of Science of Art and Design
• /
• v.1
• /
• pp.125-164
• /
• 1999

The Grid, a lattice structure adapted in paintings, is one of thesimplest plastic structures based on the intersection of horizontal and perpendicular lines. Though mankind has, from the pre-history to the present day, put it to good use in everyday life as a traditional practice or a magical, esoteric, religious emblem in the case of the teciform of primitve art, it was in the paintings of Piet Mondrian that the Grid showed its modern, artistic transformation. As we suggest in the title, before I state the Grid as a plastic construction of modern painting, this dissertation inquires the Grid structure that extends over paintings through the ages as a painterly conept, especially focused on their formation and deconstruction. To begin with, my dissertation investigates, as a historical background, a general idea of the geometrical structure and phases of its transition in art, prior to dealing with the Grids as plastic strures in modern painting. the core of my study on formal Grids is permeated through the third chapter. The first chapter concentrates on, firstly, difining the notion of the Grid and geometrical structure, secondly, searching for a historical backgrounb with whict the so- called modern Grid-paintings come in, inquiring into the formation of the illusion-Grid as aresult of discovering the linear perpective and the situation of the conflict and reconciliaton between reality and illusion. Based on these considerations, the second cecond chapter will examine the various sitations of formation and adaptation of the paintery Grids in the Literalism-Grid, as we have already seen in the chapter one. And the cardinal third chapter devotes itself to the process of the formation of the so-called Object-Grid and Literal-Grid in the Literalism or Minimalism as its logical extension of the Painterly Grid. With it we can get to an interpretation and understanding of the meaning and qualites of Grid dwelt in Modernism thst transformed the structure of Painterly Grid originally as a plane concept to the third dimentionl structure. And then, the fourth chapter, we try to draw a new meaning andre-interpretation of the Formal-Grid as a representatuinnal structure appeared in the post-modernist paintings, going with its deconstructional situation. Therefore, we can, in our study on Grids, see the various points of view in the interpretation of them as illusion-structure, as plane-structure, and as cubic-structure; its concept differs form times, oscillating between its formation and deconstruction. The Grid, as we have seen in my dissertation, contains various problems and significations in art that deserve to investigate throughly, including some important plastic problem such as space and plane, and, in the case of do-grid, time. We may expect new concepts of it that will have difference meanings. 1 hope my study makes some contributions to understanding the coordination of the abstruse modern and contemporary art.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.184-191
• /
• 2004

The purpose of this study is to suggest designing goals and directions in the lobby area of obstetric hospitals by constructing a space evaluation structure model, which is made by image evaluation structure model used by SD method and Advanced Repertory Grid Technique. As a result of the image evaluation used by SD method, it turned out 4 factors which are related to recognizing and evaluating the space formativeness, openness, decorativeness, sensitiveness. I found out the relationship between space evaluation structure and the element of interior space. I also suggested detailed designing method based on this relationship. Space evaluation structure model can be applied to designing lobby areas of obstetric hospitals to reconstruct more specific and objective designing goals and standards rather simply designer's sensitive and abstract designing approach.

• Structural Engineering and Mechanics
• /
• v.34 no.6
• /
• pp.739-753
• /
• 2010

Pointing to the design requirement of prestressed space grid structure being the target cable force, the pretension scheme decision analysis method is studied when there's great difference between structural actual state and the analytical model. Based on recursive formulation of cable forces, the simulative recursive system for pretension process is established from the systematic viewpoint, including four kinds of parameters, i.e., system initial value (structural initial state), system input value (tensioning control force scheme), system state parameters (influence matrix of cable forces), system output value (pretension accomplishment). The system controllability depends on the system state parameters. Based on cable force observation values, the influence matrix for system state parameters can be calculated, making the system controllable. Next, the pretension scheme decision method based on cable force observation values can be formed on the basis of iterative calculation for recursive system. In this way, the tensioning control force scheme that can meet the design requirement when next cyclic supplemental tension finished is obtained. Engineering example analysis results show that the proposed method in this paper can reduce a lot of cyclic tensioning work and meanwhile the design requirement can be met.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.461-472
• /
• 2015

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.1-9
• /
• 2013

In this paper, numerical simulations are performed on the lock-in phenomena of vortex induced vibration(VIV) of a two dimensional cylinder. A deforming grid as well as a rigidly moving grid are used to simulate the movement of the cylinder. The grid deformation is accomplished by the linear spring analogy. Converged solutions, which are obtained by controling the grid size and the non-dimensional time step, are used for comparison and validation of the analysis results. Moreover, the efficiency and the accuracy of the coupling methods for fluid-structure interaction are examined.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.41-45
• /
• 2002

This paper is concerned with the erection and ultimate load test of dome shaped space structures by post-tensioning. It is a fast and economical method for constructing such a dome by post-tensioning of the cable in bottom chords. This structure consists of uniform pyramids in a flat layouts on the ground, and then the structure is shaped and erected into its final curved space structure. Ultimate load test was performed for dome shaped space structures. The feasibility of the proposed erection method and the reliability of the established geometric model were confirmed with numerical analysis and experimental investigation on a small scale steel model. As a results we can find the most reasonable modeling technique for the prediction of shape formation in practices and we can know the characteristic of the behaviour in ultimate load test for practical design purposes.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.6
• /
• pp.13-20
• /
• 2009

The purpose of this study is to analyze the configuration and properties of university campus cores for systematic approach and planning through space syntax based on master plans of 55 universities in Korea. The results of this study showed that: first, the campus cores were classified into 10 types through axial map analysis. They were '一 type', '二 type', 'ㄱ type', 'T type', '+ type', 'radiation type', 'grid type', 'polygon type', 'tree structure type' and 'combination type'.(table 7) The frequency of '一 type' was the highest by 27.2%, and 'radiation type' was the next by 14.5%; second, the integration value was 2.03(+ type), te90(grid type), te75(ㄱ type), te74(一 type), te67(二 type), te63(T type), te46(polygon type), te347(tree structure type) and te343(radiation type).(table 9) We could categorize the 'radiation type' and the 'tree structure type' as the first group, the 'polygon type' as the second group, the 'T type', the '二 type', the '一 type', and the 'ㄱ type' as the third group, the 'grid type' as the fourth group, the '+ type' as the fifth group; third, cases that the integration value of access road was very low(58.2%) was much more frequent than that of very high(32.7%); fourth, the most important space in the campus core were as follows: library and media center(18.1%), administration buildings and headquarters(15.7%), student center(15.7%), lecturing building(13.9%), streets and squares(13.3%).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.526-534
• /
• 2011

The MFS (Mlti-Functional Structure) concept, which integrates the electronics, thermal control and structure into a single packaging system, has been developed and applied to reduce the volume and weight of the satellite. Therefore, this MFS can eliminate the bulky chassis/frames, cables and connectors of the electronic equipment. The main point of this traditional MFS is the replacement of the electrical chassis/frames with MCMs (Multi-Chip Modules) that require much costs and efforts for developing. This paper shows the new MFS concept that effectively saves the volume and weight. The structure including the thermal control and radiation shielding elements will be designed and manufactured as the rectangular grid-stiffened structure. The rectangular grid-stiffened structure is the modification of the iso-grid structure, and provides the enough spaces for putting the general PCBs without the chassis/frames.