• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.498-506
• /
• 2009

The stability assessment of a concrete liner of a compressed air storage tunnel should be performed by an approach which is different from that commonly used for the liners of road tunnels, since the liner is exposed to high air pressure. In this study, the stability analysis method for the liner of compressed air storage tunnel is proposed based on the elastic and elasto-plastic solutions of the thick-walled cylinder problem. In case of elastic analysis, the yield initiation condition at the inner boundary is considered as the failure condition of the liner, while the condition which results in the extension of yielding zone to a certain depth is taken as a failure indicator of the liner in the elasto-plastic analysis taking Mohr-Coulomb criterion. The application of the proposed method revealed that the influence of the relative magnitude of boundary loads on the stability of liner is considerable. In particular, noting that the estimation of the outer boundary load may be relatively difficult, it is thought that the precise prediction of outer boundary load is very important in the analysis. Accordingly, the emphasis is put on the selection of the liner installation time, which may govern the magnitude of outer boundary load.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.39-50
• /
• 2014

After the global financial crisis, domestic construction industry has gone through a rapid recession. This resulted in gradual market shift towards architectural remodeling. Architectural remodeling not only improves residential environment but it has many advantages such as increase of each unit's exclusive area, free space within the horizontal or extension of an annex building, and increase number of household through splitting the household of bigger pyeong, etc. However, in case of the Korean market for apartment remodeling, due to various regulations and problem with business promotion procedures, majority of business is slow despite the figure that remodeling volume is not that small. Also, feasibility study which decides to push ahead public house remodeling business will have a flaw using net present value's law; it has a flaw of not considering properties of each phase of remodeling business and future's uncertainty. Hence, this research will improve the problem of traditional value assessment method of net present value's law. It will also consider one of the real options such as binomial model in order to supplement NPV which is used in current feasibility study. This research was based on real successful cases of public house remodeling and it was possible for feasibility study which was more realistic and valid. This research provided foundation for development of Korean public house remodeling market. There is high anticipation of increasing the validity by improving the problems of current feasibility study and economic efficiency assessment.

• Journal of the Korean association of regional geographers
• /
• v.22 no.3
• /
• pp.576-598
• /
• 2016

This paper is to reconsider some characteristics of philosophical discussion on alienation, especially focusing on Lefebvre's concept of alienation, and then to conceptualize a number of features of alienation in both industrial and postindustrial capitalist cities. The construction and development of modern city in industrial capitalism has brought about alienation from nature and from land(i.e. means of production), and in these contexts, has generated alienated labour of urban labourers, which has been deepened through development of modern technologies and divisions of labour. The transformation from industrial to postindustrial society can be seen not as alleviating but as further intensifying and expanding process of alienation. Urban alienation in postindustrial society has been spatially and temporally extended through processes of glocalization and of financialization with the development of credit system. It also has been widened to fields of consumption and leisure and to spheres of non-material production, and has get more deeply involved in capital circulation through built environment and landscape(or spectacles) of cities. Finally this paper is to re-examine briefly theoretical discussions on dealienation in order to conceptualize the just city for dealienation of labour and of urban space, in particular considering the concept of 'the right to the city' as practical strategy of urban dealienation, and to suggest further three kinds of justice for the just city, that is, justice for distribution, for production and for recognition.

• Journal of Science of Art and Design
• /
• v.1
• /
• pp.125-164
• /
• 1999

The Grid, a lattice structure adapted in paintings, is one of thesimplest plastic structures based on the intersection of horizontal and perpendicular lines. Though mankind has, from the pre-history to the present day, put it to good use in everyday life as a traditional practice or a magical, esoteric, religious emblem in the case of the teciform of primitve art, it was in the paintings of Piet Mondrian that the Grid showed its modern, artistic transformation. As we suggest in the title, before I state the Grid as a plastic construction of modern painting, this dissertation inquires the Grid structure that extends over paintings through the ages as a painterly conept, especially focused on their formation and deconstruction. To begin with, my dissertation investigates, as a historical background, a general idea of the geometrical structure and phases of its transition in art, prior to dealing with the Grids as plastic strures in modern painting. the core of my study on formal Grids is permeated through the third chapter. The first chapter concentrates on, firstly, difining the notion of the Grid and geometrical structure, secondly, searching for a historical backgrounb with whict the so- called modern Grid-paintings come in, inquiring into the formation of the illusion-Grid as aresult of discovering the linear perpective and the situation of the conflict and reconciliaton between reality and illusion. Based on these considerations, the second cecond chapter will examine the various sitations of formation and adaptation of the paintery Grids in the Literalism-Grid, as we have already seen in the chapter one. And the cardinal third chapter devotes itself to the process of the formation of the so-called Object-Grid and Literal-Grid in the Literalism or Minimalism as its logical extension of the Painterly Grid. With it we can get to an interpretation and understanding of the meaning and qualites of Grid dwelt in Modernism thst transformed the structure of Painterly Grid originally as a plane concept to the third dimentionl structure. And then, the fourth chapter, we try to draw a new meaning andre-interpretation of the Formal-Grid as a representatuinnal structure appeared in the post-modernist paintings, going with its deconstructional situation. Therefore, we can, in our study on Grids, see the various points of view in the interpretation of them as illusion-structure, as plane-structure, and as cubic-structure; its concept differs form times, oscillating between its formation and deconstruction. The Grid, as we have seen in my dissertation, contains various problems and significations in art that deserve to investigate throughly, including some important plastic problem such as space and plane, and, in the case of do-grid, time. We may expect new concepts of it that will have difference meanings. 1 hope my study makes some contributions to understanding the coordination of the abstruse modern and contemporary art.

• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2002

Borehole image analysis has been carried out to obtain the detailed geological data by approach of direct observation. Direct application of borehole image analysis inevitably gives rise to a few of restriction of data acquisition due to the limited information within narrow borehole space. Considering the apparent dip of discontinuity surface depending upon the direction, the visualized program of two-dimensional subsurface discontinuities is coded. Borehole image analysis can compensate the distribution of subsurface discontinuity extending into the expected area of investigation. In order to draw subsurface profile in the proposed area of subsurface construction, visualized program is coded as a window GUI (Graphic User Interface) using Fortran and Visual Basic Programming languages. It is to open publicly for the usage of whoever is in want. Discontinuity distribution map is visualized along the Proposed line of tunnel in the Janggye-ri area, Jangsu-gun. Using the visualized program, the limited information from borehole spatially applies into analysis of overall subsurface structures, and the distributional characteristics of discontinuity anticipate at the proposed area. In addition, spacing and extension of joint and depth of discontinuity effecting tunnel safety can be visualized along the direction of the proposed tunnel. These lines of visualization apply design and construction of fundanmental structures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.253-263
• /
• 1993

Climatological informations have not been fully utilized by agricultural research and extension workers in Korea due mainly to inaccessbilty to the archived climate data. This study was initiated to improve access to historical climate data gathered from 72 weather stations of Korea Meteorological Administration for agricultural applications by using a microcomputer-based methodology. The climatological elements include daily values of average, maximum and minimum temperature, relative humidity, average and maximum wind speed, wind direction, evaporation, precipitation, sunshine duration and cloud amount. The menu-driven, user-friendly data retrieval system(CLIDAS) provides quick summaries of the data values on a daily, weekly and monthly basis and selective retrieval of weather records meeting certain user specified critical conditions. Growing degree days and potential evapotranspiration data are derived from the daily climatic data, too. Data reports can be output to the computer screen, a printer or ASCII data files. CLIDAS can be run on any IBM compatible machines with Video Graphics Array card. To run the system with the whole database, more than 50 Mb hard disk space should be available. The system can be easily upgraded for further expansion of functions due to the module-structured design.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2016

Improvement of heat sink technology related to the continuous implementation performance and extension of device-life in circumstance of easy heating and more compact space has been becoming more important issue as multi-functional integration and miniaturization trend of electronic gadgets and products has been generalized. In this study, it purposed to minimize of decline of the heat diffusivity by gluing polymer through compounding of inorganic particles which have thermal conductive properties. We used NH-9300 as base resin and used inorganic fillers such as silicon carbide(SiC), aluminum nitride(AlN), and boron nitride(BN) to improve heat diffusivity. After making film which was made from 100 part of acrylic resin mixed hardener(1.0 part more or less) with inorganic particles. The film was matured at $80^{\circ}C$ for 24h. Diffusivity were tested according to sorts of particles and density of particles as well as size and structure of particle to improve the effect of heat sink in view of morphology assessing diffusivity by LFA(Netzsch/LFA 447 Nano Flash) and adhesion strength by UTM(Universal Testing Machine). The correlation between diffusivity of pure inorganic particles and composite as well as the relation between density and morphology of inorganic particles has been studied. The study related morphology showed that globular type had superior diffusivity at low density of 25% but on the contarary globular type was inferior to non-globular type at high density of 80%.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2010

Purpose: We introduce arthroscopically assisted mini-open rotator cuff repair using anterolateral approach. Operative Technique: Placing lateral decubitus position on general anesthesia, a standard arthroscopic glenohumeral examination is performed to evaluate lesions of shoulder joint through posterior and anterior portal. And then arthroscope is placed in the subacromial space and we evaluate the size of the torn tendon and perform arthroscopic acromioplasty through lateral portal. A 3 to 4 cm skin incision is performed from anterolateral edge of acromion to distal and dissected along to raphe between anterior and middle deltoid. A deltoid retractor is then placed, allowing direct visualization of the rotator cuff and humeral head. As torn tendon is tagged by traction suture, we try to anatomical reduction on the footprint and then perform single row or double row repair of the rotator cuff using suture anchors. To prevent avulsion of the deltoid from the acromion, additional sutures by bone tunnel with acromion and deltoid is performed. Conclusion: This technique is useful procedure to get direct approach to anterior portion of supraspinatus tendon and to need lesser deltoid retraction than portal extension approach due to dividing along to raphe between anterior and middle deltoid. Also it provide better visualization of the superior portion of subscapularis and infraspinatus.

• Journal of Korea Game Society
• /
• v.8 no.3
• /
• pp.43-50
• /
• 2008

UI design is growing in meaning and form itself through the development of hardware and contents. And it makes users accept its interface as a extension of the body and mind because of the substantial rapport of the user and contents with developing of device and graphic. In this study, we analyzed user interface in a view of digital storytelling by observing of its role within user and contents. Not only this, classifying and investigating story elements in the games for forming the theoretical basis of storytelling UI are enforced. For the case study of UI, we choose the game, Diablo, Half-Life, and Homeworld because the game is suitable for the application of node-type storytelling and effectively uses graphic and input unit. This analysis explains the interface has the contents data that divided or shared and it means the interface performs its part of story nodes, which are extracted from the story, and choice. And we analogized that the story elemental can be substituted and used practically for interface because the stories made through the thing that users and developers are in the space of coexistence by the interface. Storytelling UI will be a good way to make a most intriguing piece as a joyful spontaneous complex that use story node. It is worth by reason of making by user and discovering live inner story so that it can approach to the substance of the story.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.237-248
• /
• 2013

Hybrid broadcasting environment is convergence of broadcasting and communication environment. In hybrid broadcasting environment, a number of media can be delivered using both broadcasting channel and other network unlike traditional broadcast environment that is able to deliver a couple of media by the limited bandwidth. Now, starting with smart TV, hybrid broadcasting environment combining broadcasting channel and IP network is established, and a variety of services are appearing. Moreover, the services using hybrid broadcasting environment are expected to appear soon for the other smart terminals such as smart phone and tablet PC. Scene composition is one of the methods that can consume effectively a number of media delivered from hybrid broadcasting environment. Using scene composition, multiple media can be consumed through the specified presentation time and space. Therefore, in this paper, it proposes the scene composition technology that is suitable for hybrid broadcasting environment and smart terminals. However, the spatial composition and temporal composition of media using script language and style language of HTML5 might increase the complexity of processing, and cause limitation of avaliable terminals. Also, a document of HTML5 can describe only one scene. By these reason, the proposed scene composition technology extends HTML5 in order to provide the spatial and temporal composition of media and description of multiple scene through markup language. In addition, it includes the extension of HTML5 in terms of utilization in hybrid broadcasting environment. For this proposal, this paper describes the technology of HTML5 and proposed scene composition. Also, it verifies the scene composition with both implementations and experiments.