• 가족자원경영과 정책
• /
• 제17권2호
• /
• pp.19-35
• /
• 2013

The purpose of this study is to analyze the effective factors that influence subjective cognition, conflict degree of work-family balance, and cognition of family strength according to general characteristic factors, working environmental factors, and home environmental factors, as well as analyze the relationships among subjective cognition, conflict degree, and cognition of family strength. The main data source for analysis in this study is the Second National Survey of Korean Families by the Ministry of Gender Equality and Family in 2010. The survey includes the analysis of 419 respondents who have a dual income and live with their wife. The collected data are analyzed using SPSS 19.0. The results of the study are as follows. First, subjective cognition of work-family balance is influenced by satisfaction of work, division of housework, and care of family. Second, the conflict degree of work-family balance is influenced by age, working week, and satisfaction with work. Third, the relationship between subjective cognition and conflict degree of work-family balance is a negative correlation. The relationship between subjective cognition of work-family balance and cognition of family strength is a positive correlation but the difference between conflict degree of work-family balance and cognition of family strength is not significant. Finally, for the married men, the working environmental factor is a significant factor for the work-family balance. And the higher the satisfaction of work and division of domestic work, the greater is the balance between work and family. This suggests that they also have a higher cognition of family strength.

• 수산해양기술연구
• /
• 제23권4호
• /
• pp.189-197
• /
• 1987

Parametric 음원을 어탐에 응용하기 위한 기초연구로써 본 실험에서는 parametric 음원의 특성을 조사하고 이 음원으로 어체에 대한 표적 강도를 측정하여 그 결과를 200KHz의 단일주파수 음원으로 측정한 결과와 비교.검토하였다. 그 결과를 요약하면 다음과 같다. 1. 200KHz인 단일주파수로 구동할 때의 지향각은 5.0$^{\circ}$였고, parametric 음원의 주파수가 5KHz, 10KHz, 16KHz, 20KHz일 때의 지향각은 각각 4.3$^{\circ}$, 2.2$^{\circ}$, 3.0$^{\circ}$, 2.5$^{\circ}$로서 주파수 저감비가 감소할수록 지향각이 예리하였으며 부엽은 전혀 나타나지 않았다. 2. parametric 음원의 주파수가 5KHz, 10KHz, 16KHz, 20KHz일 때의 음파변환효율은 각각 0.9%(Parametric 이득은 -41dB), 0.55%(parametric 이득은 -45dB), 0.1%(parametric 이득은 -60 dB), 0.04%(parametric 이득은 -68 dB)로 주파수 저감비가 감소할수록 음파변환효율은 급격히 낮아졌다. 3. parametric 음원으로 측정한 어체의 표적강도는 200KHz의 단일주파수 음원으로 측정한 표적강도에 비하여 단일어체일 때는 머리부분과 꼬리부분에서 5 dB씩 낮았으며 어체수가 2~3마리 일때는 머리부분과 꼬리부분에서 1~3 dB 정도 낮았으나 측면부분은 비슷하였다

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.561-565
• /
• 2010

용접부는 일반적으로 잘 알려져 있는 바와 같이, 외력에 의한 응력 집중원(stress concentration source)이 되는 것은 물론 용접과정에서의 입열(heat input)로 인한 성분과 조직의 변화에 의해 반복하중에 대한 피로강도(fatigue strength)가 모재의 그것에 비해 훨씬 떨어져서 피로균열(fatigue crack)의 발단이 되고 있다. 따라서, 본 연구에서는 실제로 철도차량에 적용되는 가스용접 이음재 가운데 대표적인 형상시편들을 재질별로 피로실험을 수행하여 피로하중범위-피로수명(${\Delta}P-N_f$) 관계를 도출하여 비교 평가하였다. 또한, 수치 해석적 유한요소법을 이용하여 용접이음재의 응력분포를 해석한 후, 용접이음부에 발생하는 최대주응력으로 (${\Delta}P-N_f$) 관계를 $\Delta\sigma-N_f$ 관계로 재정리하였다. 이상의 결과들을 바탕으로, 가스용접이 적용된 철도차량 차체의 경제적이고 합리적인 피로설계를 위한 기초정보로 사용하고자 하였다.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.253-263
• /
• 2015

Ordinary Portland cement is a widely favored construction material because of its good strength and durability and its reasonable price; however, spalling behaviour during fire exposure can be a serious risk that can lead to strength degradation or collapse of a building. Geopolymers, which can be synthesized by mixing aluminosilicate source materials such as metakaolin and fly ash, and alkali activators, are resistant to fire. Because the chemical composition of geopolymers controls the properties of the geopolyers, geopolymers with various Si:Al ratios were synthesized and evaluated as fire resistant construction materials. Rejected fly ash generated from a power plant was quantitatively analyzed and mixed with alkali activators to produce geopolymers having Si:Al ratios of 1.5, 2.0, and 3.5. Compressive strength of the geopolymers was measured at 28 days before and after heating at $900^{\circ}C$. Geopolymers having an Si:Al ratio of 1.5 presented the best fire resistance, with a 44% increase of strength from 29 MPa to 41 MPa after heating. This material also showed the least expansion-shrinkage characteristics. Geopolymer mortar developed no spalling and presented more than a 2 h fire resistance rating at $1,050^{\circ}C$ during the fire testing, with a cold side temperature of $74^{\circ}C$. Geopolymers have high potential as a fire resistant construction material in terms of their increased strength after exposure to fire.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.44-53
• /
• 2021

As environmental issues have emerged worldwide, emission gas regulations have been strengthened. In the construction machinery sector, studies have been actively conducted to utilize the power source of electric motors owing to the increasing demand for zero emissions. In this study, the gear specifications of an electric axle for construction machinery were selected by considering the specifications of the motor, gear tooth contact pattern, and face load factor. The gear strength evaluation was performed at the system level using the simulation model. The bending and contact strength of the spiral bevel gears and the bending strength of the planetary gear set showed a safety factor of 1 or more. However, the contact strength of the planetary gear set showed a safety factor of 0.92. Conservative results were derived by performing the analysis under the rated load condition of the motor. However, the ratio of the equivalent torque to the rated torque of the motor was 45% or less, hence, it was determined that no difficulties should arise regarding the durability of the axle.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2282-2291
• /
• 2024

In this work we study the effects of different factors of dislocation loop on its obstacle strength when interacting with an edge dislocation. At first, the interaction model for dislocation and dislocation loop is established and the full and partial absorption mechanism is obtained. Then, the effect of temperature, size and burgers vector of dislocation loop are investigated. The relation between the obstacle strength and irradiation dose has been established, which bridges the irradiation source and microscale properties. Except that, the obstacle strength of C, Cr, Ni, Mn, Mo and P decorated dislocation loop is studied. Results show that the obstacle strength for dislocation loop decorated by alloy element decreases in the sequence of Cr, Ni, Mn, C, P and Mo, which could be used to help parameterize and validate crystal plasticity finite element model and therein integrated constitutive laws to enable accounting for irradiation-induced chemical segregation effects.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.49-54
• /
• 2017

In this study, the volumetric heat source in electron beam welding (EBW) is modeled through finite element method taking advantage of ABAQUS software package. Since this welding method is being applied in plates with different thicknesses and also considering that residual stresses reduce the strength of these weldments, the effect of thickness in the distribution and magnitude of residual stresses after welding is studied. Regarding the vast application of Inconel 706 super-alloy in aerospace industries, this material was selected in the current research. In order to validate the finite element model, the obtained results were compared to those of other researchers in this area, and good agreement was observed. The simulation results revealed that increase in the plate thickness leads to increase in the residual stresses. In addition heat treatment in the base metal (before welding) increases the residual stresses significantly.

• 한국레이저가공학회지
• /
• 제8권3호
• /
• pp.21-26
• /
• 2005

A bonding process between tape-carrier package and a glass panel with anisotropic conductive film (ACF) has been investigated by making use of high power diode laser as a heat source for cure. The results from modeling of process and from optical properties of layers showed that heat absorbed from polyimide film surface and ACF layer is dominant source of curing during laser illumination. Laser ACF bonding has better bonding quality than conventional bonding in view of peel strength, flatness, pressure unbalance and processing time. New ACF bonding processes by making use of high power diode laser are proposed.

• Tuberculosis and Respiratory Diseases
• /
• 제79권4호
• /
• pp.201-206
• /
• 2016

Active tuberculosis (TB) has a greater burden of TB bacilli than latent TB and acts as an infection source for contacts. Latent tuberculosis infection (LTBI) is the state in which humans are infected with Mycobacterium tuberculosis without any clinical symptoms, radiological abnormality, or microbiological evidence. TB is transmissible by respiratory droplet nucleus of $1-5{\mu}m$ in diameter, containing 1-10 TB bacilli. TB transmission is affected by the strength of the infectious source, infectiousness of TB bacilli, immunoresistance of the host, environmental stresses, and biosocial factors. Infection controls to reduce TB transmission consist of managerial activities, administrative control, engineering control, environmental control, and personal protective equipment provision. However, diagnosis and treatment for LTBI as a national TB control program is an important strategy on the precondition that active TB is not missed. Therefore, more concrete evidences for LTBI management based on clinical and public perspectives are needed.

• 소음진동
• /
• 제11권2호
• /
• pp.221-225
• /
• 2001

In order to make a quiet zone, one can consider various methods. Of the methods, this paper deals with the method using control materials such as absorption materials. This method controls sound fields by changing boundary conditions. First, this paper shows that the control material is essentially on the same road as active noise control (ANC) That is, we can consider the control material as the control source of ANC. However we cannot control the source strength. Second, this paper shows that the position of the control material is an important variable by a numerical simulation. And the strategy to optimize the position is addressed.