• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.2
• /
• pp.107-116
• /
• 1998

Coal gasification fuel has generally a lower calorific values than natural gas and also contains ammonia which is a main source of fuel NOx. Such a fuel is in need of the advanced technologies for the NOx reduction with higher combustion efficiency. Therefore fuel staged combustion was investigated for the fuel NOx control using a bench scale gas combustoi for the fuel NOx control. Parametric screening studies were performed with the variation of air ratio, retention length and reburning fuel. The NOx reduction efficiency was increased with an increase of total air ratio having optimum reburning air ratio differently, The Increased retention length of the reburning zone was preferable for NOx reduction. Hydrocarbonic reburning fuels like propane and butane were more effective for the NOx reduction efficiency than hydrogen fuel. The NOx concentration at exit was linearly increased according to the fuel-N the fuel.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.137-143
• /
• 2003

Annual radiation dose limit to radiation worker was substantially lowered in Korea by the adoption of 1990 recommendations of the International Commission on Radiation Protection (ICRP 60) in its legislation. On the other hand, radiation management environment in nuclear power plants is getting more worse because of the accumulation of radiation sources inside the system and the frequent need for maintenance according as the operation years of nuclear power plants increase. Therefore, Korea Hydro & Nuclear power Co., Ltd. (KHNP) has established a long-term 10 years plan from 2001 to 2010 for the reduction of radiation dose to workers. The plan is aimed for the reduction of annual dose per unit averaged over 5 years from 0.9 man-Sv in 2001 to 0.75 man-Sv in 2010 by radiation source reduction, equipment/tool improvement or new equipment development for easy maintenance, and the improvement of administration and system.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.350-356
• /
• 1996

This paper presents VHF-Plasma Enhanced Chemical Vapor Deposition (VHF-PECVD) of Ti/TiN with silne reduction process, using $TiCl_4$ source. VHF plasma, which is denser than a conventional RF plasma, produces a large number of radicals. Silane reduction process, which supplies silane radicals, more promotes dissociation of Ti-Cl bond than a conventional hydrogen reduction process. therefore, the VHF-PECVD with silane reduction process forms high quality Ti/TiN films, which have low level of Cl content(<0.2 at.%). In result, the resistivity for Ti or TiN is less than 200$\mu$$\Omega$cm. The surface morphology of Ti film is very smooth. The structure of TiN film is amorphous. Furthermore, excellent step coverage for the films is obtained.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.495-501
• /
• 2013

This paper deals with noise reduction on a light source driving board in a projector. We analyze causes of noise/vibration in the circuit with the present increasing use of LD and LED driving boards. The main source of noise is the MLCC in the driving board. Our aim is to investigate how the mechanical arrangement of the circuit elements affects noise reduction. The result of our experiment shows that noise can be reduced by symmetrical arrangement and slots in PCB. This result is expected to facilitate a variety of applications for manufactures without a need to change circuit elements.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.3
• /
• pp.129-135
• /
• 2011

An algorithm is presented for estimating the 3-D location (i.e., azimuth angle, elevation angle, and range) of multiple sources with a uniform circular array (UCA) consisting of an even number of sensors. Recently the rank reduction (RARE) algorithm for partly-calibrated sensor arrays was developed. This algorithm is applicable to sensor arrays consisting of several identically oriented and calibrated linear subarrays. Assuming that a UCA consists of M sensors, it can be divided into M/2 identical linear subarrays composed of two facing sensors. Based on the structure of the subarrays, the steering vectors are decomposed into two parts: range-independent 2-D direction-of-arrival (DOA) parameters, and range-relevant 3-D location parameters. Using this property we can estimate range-independent 2-D DOAs by using the RARE algorithm. Once the 2-D DOAs are available, range estimation can be obtained for each source by defining the 1-D MUSIC spectrum. Despite its low computational complexity, the proposed algorithm can provide an estimation performance almost comparable to that of the 3-D MUSIC benchmark estimator.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.269-284
• /
• 2017

A new technique is proposed to obtain more effective screening efficiency against the ground vibration using intermittent geofoam (IF) in-filled trench. The numerical analysis is performed by employing two-dimensional finite element method under dynamic condition. Vertically oscillated strip foundation is considered as the vibration source. In presence of the ground vibration, the vertical displacements at different locations (pick-up points) along the ground surface are captured to determine the amplitude reduction factor (ARF), which helps to assess the efficiency of the vibration screening technique. The efficiency of IF over continuous geofoam (CF) in-filled vibration barriers is assessed by varying the geofoam density, the location of trench and the frequency of excitation. The results from this study indicate that a significant reduction in ARF can be achieved by using intermittent geofoam as compared to continuous geofoam. Further, it is noticed that the efficiency of IF increases with an increase in the frequency of the vibrating source. These encouraging results put forward the potential of utilising intermittent geofoam as a vibration screening material.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.47-61
• /
• 1996

An ATM switch must deal with various kinds of input sources having different traffic characteristics and it must guarantee very small value of cel loss probability, about 10$^{8}$ -10$^{12}$ , to deal with loss-sensitive traffics. In order to estimate such a rate event probability with simulation procedure, a variance reduction technique is essential for obtaining an appropriate level of precision with reduced cost. In this paper, we propose a hybrid simulation technique to achieve reduction of variance of cell loss probability estimator, where hybrid means the combination of analytical method and simulation procedure. A discrete time queueing model with multiple input sources and a finite shared buffer is considered, where the arrival process at an input source and a finite shared buffer is considered, where the arrival process at an input source is governed by an Interrupted Bernoulli Process and the service rate is constant. We deal with heterogeneous input sources as well as homogeneous case. The performance of the proposed hybrid simulation estimator is compared with those of the raw simulation estimator and the importance sampling estimator in terms of variance reduction ratios.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.269-288
• /
• 2006

We revised the OTFTOOL which was developed in Five College Radio Astronomy Observatory (FCRAO) for the On-The-Fly (OTF) observation. Besides the improvement of data resampling function of conventional OTFTOOL, we added a new SELF referencing mode and data pre-reduction function. Since OTF observation data have a large redundancy, we can choose and use only good quality samples excluding bad samples. Sorting out the bad samples is based on the floating level, rms level, antenna trajectory, elevation, $T_{sys}$, and number of samples. And, spikes are also removed. Referencing method can be chosen between CLASSICAL mode in which the references are taken from the OFFs observation and ELLIPSOIDAL mode in which the references are taken from the inner source free region (this is named as SELF reference). Baseline is subtracted with the source free channel windows and the baseline order chosen by the user. Passing through these procedures, the raw OTF data will be an FITS datacube. The revised-OTFTOOL maximizes the advantages of OTF observation by sorting out the bad samples in the earliest stage. And the new self-referencing method, the ELLIPSOIDAL mode, is very powerful to reduce the data. Moreover since it is possible to see the datacube at once without moving them into other data reduction programs, it is very useful and convenient to check whether the data resampling works well or not. We expect that the revised-OTFTOOL can be applied to the facilities of the OTF observation like SRAO, NRAO, and FCRAO.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.1
• /
• pp.113-121
• /
• 2000

The effect of Sunlight exposure on reducing the microorganism counts in the bedding materials was experimented by using 3 kinds of microorganisms(S. aureus, K. pnenmoniae and E. coli) and 3 kinds of fabrics (cotton, silk and polyester). Counts of the microorganism were examined before and after sunlight exposure. The sunlights were controlled U.V and Daylight D50 using MacBeth artificial light source. The specimens were exposed for 5 min, 10 min and 30 minutes under the $20^{\circ}C$ and 60% R.H, distance is 50cm from the light source. Results were as follows, 1. The reduction rate of the 3kinds of microorganisms was remarkably great under the U.V exposure. The U.V. exposure was very effective way to sterlize the bedding materials in the house care. 2. S. aureus was the most susceptible to U.V. exposure and the sunlight exposure. E. coli was the most resistant to the U.V and the sunlight exposure. 3. The reduction rate of the 3 kinds of fabrics was not significantly different. The polyester is more resistant than the silk and the cotton. Those were shown good reduction rate if all kinds of microorganism under the U.V and daylight.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.816-822
• /
• 2008

This study presents the design modification for SCR muffler of a commercial vehicle. Its main objective is the reduction of radiated noise at SCR muffler. For this study, the research of five steps were achieved by experimental and CAE analysis. First step is the measurement of radiated noise using impact-acoustic test. Second step is the source identification using experimental modal analysis. The cause of radiated noise source is confirmed by the resonance of end plates at SCR muffler. Third step confirms the possibility of resonance avoidance using SDM analysis applied the mass control. Fourth step is the suggestion of design modification which is the change of mode shape by CAE analysis. Last step is the verification of design modification using SYSNOISE analysis. Finally, the prototype product applied the countermeasure of resonance evasion was manufactured and the reduction of radiated noise at SCR muffler was confirmed by pass-by noise test.