• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.214-222
• /
• 2008

Bode principle is applied to carry out traffic control for rate based ATM network, which guarantees the higher buffer utilization, buffer overflow-free, and well utilization of bandwidth. The principle confirms the relationship between the threshold of buffer queue and the network bandwidth, as well as the relationship between the threshold of buffer and source input rate. Theoretic warrant of the buffer threshold is proposed. The reference range of source input rate is provided in theory, which makes the source end respond to the change of network state rapidly and dynamically, and then the effect of time delay to the traffic control is avoided. Simulation results show that the better steady and dynamic performances of networks are obtained by Bode principle.

• 한국항행학회논문지
• /
• 제13권4호
• /
• pp.523-531
• /
• 2009

본 논문에서는 패킷 손실 채널로의 전송을 위한 비디오 부호기의 소스/채널 부호화율 통합 제어 방식을 제안한다. 비디오 전송 시스템의 지연 제약에 따른 소스 부호화율 상한을 구하고, 부호화되거나 스킵된 화면에 대한 소스 왜곡과 패킷 손실에 의한 채널 왜곡을 기반으로 일정 부호화 구간에 대한 평균 왜곡을 정의한다. 주어진 채널률과 패킷 손실률에 대해 비디오 부호화 계수와 FEC 블록 크기를 제어계수로 하는 평균 왜곡 최소화 문제를 정의하고, 실시간 해결 알고리즘을 제안한다. 모의실험에서 제안방식은 40% 이하의 패킷 손실률과 30 프레임 이상의 인트라 매크로블럭 갱신률에서 TMN8에 비해 PSNR과 주관적 화질에서 우수한 성능을 보였다.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.65-75
• /
• 2005

In this paper, we consider a scenario in which the source has been offered QoS guarantees subject to token-bucket regulation. The rate of the source should be controlled such that it conforms to the token-bucket regulation, and also the distortion obtained is the minimum. We have developed an optimal scheduling algorithm for offline (like pre-recorded video) sources with convex distortion function and which can not tolerate any delay. This optimal offline algorithm has been extended for the real-time online source by predicting the number of packets that the source may send in future. The performance of the online scheduler is not substantially degraded as compared to that of the optimal offline scheduler. A sub-optimal offline algorithm has also been developed to reduce the computational complexity and it is shown to perform very well. We later consider the case where the source can tolerate a fixed amount of delay and derive optimal offline algorithm for such traffic source.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1341-1346
• /
• 2011

Currently, many researches are carried out for laser assisted machining, which is one of the important fields in materials difficult to process. However, a prediction of heat source is difficult because of moving heat source. In this paper, a thermal analysis of laser assisted machining of plate by change of heat source size is performed, and preheating temperature by adjusting the feed rate is controlled. It was recognized that the maximum preheating temperature increases according to the decrease in heat source size, and feed rate need to adjust as high speed. The results of this analysis can be used as a reference for preheating temperature prediction in laser assisted milling.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.28-40
• /
• 2022

Although precise temperature control in the heat treatment process is a key factor in process reliability, there are many cases where there is no separate heat source control optimization system in the field. To solve this problem, the program monitors the temperature data according to the heat source change through sensor communication in a recursive method based on multiple variables that affect the process, and the target heat source value and the actual heat treatment heat source to match the internal air temperature and material temperature. A control optimization system was constructed. Through this study, the error rate between the target temperature and the atmosphere (material surface) temperature of around 10.7% with the existing heat source control method was improved to an improved result of around 0.1% using a process optimization algorithm and system.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.53-62
• /
• 2006

In this paper, ATM network congestion control with explicit rate feedback is considered. In ATM networks, delays commonly appear in data transmission and have to be considered in congestion control design. In this paper, a bounded single round delay on the return path is considered. Our objective is to design an explicit rate feedback control that achieves a robust optimal $H_2$ performance regardless of the bounded time-varying delays. An optimization approach in terms of linear matrix inequalities (LMIs) is given. Saturation in source rate and queue buffer is also taken into consideration in the proposed design. Simulations for the cases of single source and multiple sources are presented to demonstrate the effectiveness of the design.

• Journal of Information Processing Systems
• /
• 제13권3호
• /
• pp.630-642
• /
• 2017

In this paper, we propose the opportunistic non-orthogonal multiple access (NOMA)-based cooperative relaying system (CRS) with channel state information (CSI) available at the source, where CSI for the source-to-destination and source-to-relay links is used for opportunistic transmission. Using the CSI, for opportunistic transmission, the source instantaneously chooses between the direct transmission and the cooperative NOMA transmission. We provide an asymptotic expression for the average achievable rate of the opportunistic NOMA-based CRS under Rayleigh fading channels. We verify the asymptotic analysis through Monte Carlo simulations, and compare the average achievable rates of the opportunistic NOMA-based CRS and the conventional one for various channel powers and power allocation coefficients used for NOMA.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.131-136
• /
• 2013

The present study has conducted cycle design and control technology of a water source VRF heat pump system. Previously, study of a simultaneous heating and cooling in an air source VRF heat pump system has been conducted. However, performance data and design methods for simultaneous heating and cooling in a water source VRF heat pump system are limited in the literature, due to various system parameters and operating conditions. In this study, the operating characteristics and performances of a simultaneous heating and cooling heat pump system are carried out, in simultaneous operation modes. Control logics of an EEV are developed for flow rate control to the outdoor unit, and are verified. When the control logics are applied, the simultaneous cooling and heating performances are sufficiently achieved, and system COPs are increased by up to 23.4%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.930-932
• /
• 2007

In order to understand the doping control for the belt source evaporation, the Alq3 and NPB were codeposited on the Ta plate to re-sublimate. The very slow heating $(0.1^{\circ}C/s)$ of the Ta plate shows the separated rate signals of Alq3 and NPB sublimated from the Alq3-mixed NPB organic film on Ta plate. The ratio of the vapor rates of Alq3 and NPB was measured as same as that of each sublimation rates. Therefore, the doping control of the belt source evaporation is of the ratio of the vaporization rates of host and dopants.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.829-836
• /
• 2006

The reaction rate of denitrification is primarily affected by the utilization of organics that are usually limited in the anoxic period in a sequencing batch reactor. It is necessary to add an extemal carbon source for sufficient denitrification. An adaptive model of state-space based on the extended Kalman filter is applied to manipulate the dosage rate of extemal carbon automatically. Control strategies for denitrification have been studied to improve control performance through simulations. The normal control strategy of the constant set-point results in the overdosage of external carbon and deterioration of water quality. To prevent the overdosage of external carbon, improved control strategies such as the constrained control action, variable set-point, and variable set-point after dissolved oxygen depletion are required. More stable control is obtained through the application of the variable set-point after dissolved oxygen depletion. The converging value of the estimated denitrification coefficient reflects conditions in the reactor.