• 대기
• /
• 제29권4호
• /
• pp.429-438
• /
• 2019

Organic carbon (OC) and elemental carbon (EC) in PM_2.5 were measured with Sunset Laboratory Model-5 Semi-Continuous OC/EC Field Analyzer by NIOSH/TOT method at Anmyeondo Global Atmosphere Watch (GAW) Regional Station (37°32'N, 127°19'E) in July and August, 2017. The mean values of OC and EC were 3.7 ㎍ m^-3 and 0.7 ㎍ m^-3, respectively. During the study period, the concentrations of reactive gases and aerosol compositions were evidently lower than those of other seasons. It is mostly due to meteorological setting of the northeast Asia, where the influence of continental outflow is at its minimum during this season under southwesterly wind. While the diurnal variation of OC and EC were not clear, the concentrations of O₃, CO, NOx, EC, and OC were evidently enhanced under easterly wind at night from 20:00 to 8:00. However, the high concentration of EC was observed concurrently with CO and NOx under northerly wind during 20:00~24:00. It indicates the influence of thermal power plant and industrial facilities, which was recognized as a major emission source during KORUS-AQ campaign. The diurnal variations of pollutants clearly showed the influence of land-sea breeze, in which OC showed good correlation between EC and O₃ in seabreeze. It is estimated to be the recirculation of pollutants in land-sea breeze cycle. This study suggests that in general, Anmyeondo station serves well as a background monitoring station. However, the variation in meteorological condition is so dynamic that it is primary factor to determine the concentrations of secondary species as well as primary pollutants at Anmyeondo station.

• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2006

The steel foundries with electric arc furnaces handling metal scraps have recently gained an attention as a potential source of dusts. The present study focuses on the analysis of dust emissions and removals during furnace charging and melting processes by commercial CFD software named FLUENT. A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding NavierStokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations. The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process. As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.

• 농촌계획
• /
• 제17권3호
• /
• pp.67-80
• /
• 2011

This study was conducted to understand the distribution characteristics of old tree (protected tree) and propose the effective management plan for old tree to make hold a sustained function as natural and cultural resources in rural area. We surveyed 96 old trees at 69 farm villages in Yaesan-gun, South Chungcheong Province. The species of tree was investigated with Zelkova serrata, Ginkgo biloba, Quercus acutissima, Pinus densiflora, Celtis sinensis, and Juniperus cbinensis order. Most of them located at the inside (43.6%) and the entrance (35.1%) of a village, and at mountain slope (31.9%) and alluvial plain (25.3%) in terms of distribution topography. The existing place of pollution source was investigated with 61%, and the pollution sources were blocks, construction materials, cement packings, farm machines and living garbage. The place where the rates of bare ground were more than 50% for the root region of a protection tree was 63%. The tree surgical operation was investigated in 37.5% of protection trees, and 12.5% of protection trees were investigated with a tree surgical operation being immediately. The average score for health condition of old tree at study sites was 18.6 points. A monitoring class was divided by public monitor 59.3%, main monitor 38.5%, and dead tree 2.2% on the basis of that information. Hereafter, we will conduct to promote the management guideline and develope culture contents through additional investigation.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.413-419
• /
• 2018

Magnetic Resonance Imaging for patients with metallic implant has poor image quality, and signal loss and artifacts including distortion can occur. The purpose of this study is to carry out a comparative evaluation on high receive bandwidth(hiBW), O-MAR, O-MAR XD to reduce artifacts in knee implant. To take MRI, 3.0T scanner and dual-source radiofrequency transmission were used. O-MAR XD technique's strong option showed a significant difference (p<0.001) with O-MAR XD technique's weak option, O-MAR and hiBW excluding the medium option. O-MAR XD's medium option had a significant difference (p<0.01) with O-MAR XD's weak, O-MAR and hiBW. O-MAR XD technique's weak option had a significant difference (p<0.01) with O-MAR XD's strong and medium options, O-MAR and hiBW. O-MAR technique had a significant difference (p<0.001) with strong, medium, weak options of O-MAR XD technique except for hiBW. HiBW had a significant difference (p<0.001) with strong, medium and weak options of O-MAR XD technique except for O-MAR. The results showed that O-MAR XD technique was more useful for MRI scan for patients with knee replacement surgery than traditional techniques such as hiBW or O-MAR, and susceptibility artifacts decreased more when O-MAR XD technique's strong or medium option was applied. Based on the results above, it is considered that it will be possible to acquire images whose susceptibility artifacts were highly decreased by using O-MAR XD technique's strong or medium option when conducting MRI for artificial knee joint and it will be helpful for checking and monitoring patients with knee joint replacement.

• Composites Research
• /
• 제14권5호
• /
• pp.12-19
• /
• 2001

급격한 과도하중이나 충격 등에 의해서 발생만 복합적층 내부의 손상은 항공기 구조물과 같이 안전성이 중요시되는 구조의 신뢰성을 저하시키며 또한 큰 위험 요인이 될 수 있다. 따라서 본 연구에서는 구조의 건전성을 모니터링하고 파손여부를 실시간으로 감지하기 위해 단파장 레이저와 광대역광원을 동시에 적용한 광섬유 센서를 이용하여 변형률 및 파손을 실시간으로 동시에 모니터링 할 수 있는 시스템을 구성하였다 이때 서로 다른 파장대의 두 장원은 파장분할다중 송신기를 이용하여 하나의 광섬유 센서에 적용되었다 파손신호의 특징을 정량적으로 구분하기 위해 STFT와 Wavelet Transform 과 같은 시간 주파수 분석법을 사용하였으며, 광섬유 센서로 취득 긴 파손신호 및 변형률 측정값을 각각 압전 세라믹 센서와 스트레인게이지의 값과 서로로 비교하였다. 장시간동안 파손과 동시에 측정된 변형률의 값은 스트레인게이지의 측정값과 잘 일치하였으며 파손감지 시스템 또만 미세한 파손신호까지 민감하게 감지해 낼 수 있음을 알 수 있었다.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.287-293
• /
• 2011

본 연구에서는 교량의 진동을 이용한 압전 외팔보 에너지 수확장치의 적용성을 연구하였다. 이를 위하여 압전 소자의 구성방정식과 외팔보의 진동방정식을 결합하여 외팔보의 단일 모드에 대한 연성 방정식을 행렬 형태로 구성하였다. 그리고 에너지 수확장치의 가진기 실험을 통하여 해석 모델의 타당성을 검증하였다. KTX, 새마을, 무궁화 열차가 주행할 때 측정된 교량 가속도를 바탕으로 수치해석을 통하여 산정한 에너지 수확장치의 최대 전력은 각각 28.5 mW, 0.65 mW, 0.51 mW로 나타났다. 이를 볼 때 철도와 같은 이동하중에 의한 교량의 진동은 가진 진동수와 가속도가 낮고 지속시간이 짧아서 에너지 공급원으로서 효율성이 떨어지는 것으로 판단된다.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.57-69
• /
• 2003

To evaluate nutrient dynamics with different fertilization in paddy field and develop water quality model, mass balance analysis was performed during growing season of 2001-2002 in field experimental plots irrigated with groundwater. As a result of water balance analysis, most of outflow was surface drainage as about half of total outflow and about 500mm was lost by evapotranspiration. The water budget was well balanced. The runoff from paddy field was influenced by rainfall and forced drain. Especially runoff during early cultural periods more depends on the forced drain. As a result of mass balance analysis, most of nutrient was input by fertilization and lost by plant uptake. Significant amount of nitrogen were supplied by precipitation and input from upper paddy field, comprising 12%∼28% of total inflow. Nutrient loading by surface drainage was occurred showing about 15%∼29% for T-N and 6%∼13% for T-P. The response of rice yield with different fertilization was not significant in this study. Water quality model for paddy field developed using Dirac delta function and continuous source was calibrated and validated to surface water quality monitoring data. It demonstrates good agreement between observed and simulated. The nutrient concentration of surface water at paddy field was significantly influenced by fertilization. During early cultural periods when significant amount of fertilizer was applied, surface drainage from paddy field can cause serious water quality problem. Therefore, reducing surface drainage during fertilization period can reduce nutrient loading from paddy fields. Shallow irrigation, raising the weir height in diked rice fields, and minimizing forced surface drainage are suggested to reduce surface drainage outflow.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.29-36
• /
• 2013

The objective of the research was to describe the effect of straw mat cover and soil amendments on the reduction of runoff and non-point source load from steep sloped highland agricultural fields. Four $5{\times}30$ m plots on sandy loam soil with 28 % slope were prepared. Experimental treatments were bare (control), rice straw mat cover (3,000 kg/ha) (S), PAM (5 kg/ha)+Gypsum (1 ton/ha) (PG) and rice straw mat cover+PAM+Gypsum (SPG). A variety of lettuce was cultivated and runoff was monitored during a growing season in 2011. Natural monitoring was conducted to three times. Runoff rate of S, PG and SPG plots were significantly lower than those of control plot. Especially, the runoff rate is zero in SPG plot at a first rainfall events. The reduction rate of runoff from the S, PG and SPG plots was 30.8 %, 29.0 % and 81.8 % compared to control plots, respectively. The reduction rate of NPS pollution load of S, PG and SPG was ranged of 50~90 %, 30~70 % and 90~100 %, respectively. Yield of lettuce from S, PG and SPG plots was respectively 400 (567 kg/ha), 320 (453 kg/ha) and 760 (1,067 kg/ha) that of compared to control plots greater than that from control plots (140 kg/ha). We speculated that the experimental treated plots could hold more nutrients and moisture than the control and helped the crop grow healthier. When analyzing the above results, in terms of reduction of runoff and NPS pollution load and crop yields, SPG experimental treatment had the best effect. It was concluded that the use of rice straw mats cover and soil amendments on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.

• 한국농공학회논문집
• /
• 제59권4호
• /
• pp.75-83
• /
• 2017

Many parts of problems in livestock industry today are associated with organic dust. Endotoxin and toxic gasses on the surface of dust and dust itself can cause aesthetic displeasure and respiratory disease. It also reduces livestock productivity by suppressing immunity of animals and carrying microbes causing animal disease. However, dust level of cattle farm was rarely reported in Korea, and regulation for cattle farm worker does not exist. In this paper, dust concentration and environmental condition were regularly monitored in a commercial Korean native cattle farm. The measurement was conducted according to location and working activities. From the measurement, distribution of dust concentration was affected by wind environment, as the result of natural ventilation. TMR mixer was a major source of dust in target cattle house. The maximum inhalable dust concentration was 637.8 times higher than exposure limit as feed dropped into the TMR mixer. It was expected that dust generation could be affected by particle size and drop height of feed. This study suggests potential risk of dust in cattle farm, and necessity for latter study. Effect of aerodynamic condition and TMR processing should be investigated for dust reduction study.

• 대한의용생체공학회:의공학회지
• /
• 제32권1호
• /
• pp.45-54
• /
• 2011

Cuff electrodes have a benefit for chronic electroneurogram(ENG) recording while minimizing nerve damage. However, the ENG signals are usually contaminated by electromyogram(EMG) activity from the surrounding muscle, the thermal noise generated within the source resistance, and the electric noise generated primarily at the first stage of the amplifier. This paper proposes a new cuff electrode to reduce the interference of EMG signals. An additional middle electrode was placed at the center of cuff electrode. As a result, the proposed cuff electrode achieved a higher signal-to-interference ratio compared to the conventional tripolar cuff. The cuff electrode was then assembled together with closure, headstage, and hermetic case including electronic circuits. This paper also presents a lownoise amplifier system to improve signal-to-noise ratio. The circuit was designed based on the noise analysis to minimize the electronic noise. The result shows that the total noise of the amplifier was below $1{\mu}V_{rms}$ for a cuff impedance of $1\;k{\Omega}$ and the common-mode rejection ratio was 115 dB at 1 kHz. In the current study, the performance of nerve cuff electrode system was evaluated by monitoring afferent nerve signals under mechanical stimuli in a rat animal model.