• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.687-692
• /
• 2008

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location caused by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1143-1149
• /
• 2008

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location cavsed by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.8-11
• /
• 2010

During PEO (plasma-electrolytic-oxidation) treatment of titanium, the relationship between the thickness of oxide film and the measured electrical information was investigated. A simple real time monitoring method based on the electrical information being gathered during PEO treatment is proposed. The proposed method utilizes the current flowing from a high frequency voltage source to calculate the resistance of an oxide film, which is converted into the thickness of an oxide film. This monitoring method can be implemented in PEO system in which an oxide film is grown by constant or pulsed voltage/current sources.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.285-294
• /
• 2023

Autonomous radiation source detection has long been studied for radiation emergencies. Compared to conventional data-driven or path planning methods, deep reinforcement learning shows a strong capacity in source detection while still lacking the generalized ability to the geometry in unknown environments. In this work, the detection task is decomposed into two subtasks: exploration and localization. A hierarchical control policy (HC) is proposed to perform the subtasks at different stages. The low-level controller learns how to execute the individual subtasks by deep reinforcement learning, and the high-level controller determines which subtasks should be executed at the current stage. In experimental tests under different geometrical conditions, HC achieves the best performance among the autonomous decision policies. The robustness and generalized ability of the hierarchy have been demonstrated.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.129-134
• /
• 2024

This study aims to talk about the necessity of solving the PFC gas emission problem raised by the recent development of the semiconductor industry and the remote plasma source method monitoring system used in the semiconductor industry. The 'monitoring system' means that the researchers applied machine learning to the existing monitoring technology and modeled it. In the process of this study, Residual Gas Analyzer monitoring technology and linear regression model were used. Through this model, the researchers identified emissions of at least 12700mg CO2 to 75800mg CO2 with values ranging from ion current 0.6A to 1.7A, and expect that the 'monitoring system' will contribute to the effective calculation of greenhouse gas emissions in the semiconductor industry in the future.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.431-433
• /
• 2006

Accurate information on the ground surface temperature is essential for design of a borehole heat exchanger and thus ensuring the performance of a ground source heat pump system along with knowledge on thermal diffusivity and conductivity of ground. In this study we analyzed the shallow subsurface temperature monitoring data of 58 Korea Meteorological Administration synoptic stations. As a result, we compiled mean annual ground surface temperature distribution map using multiple regression analysis of the monitoring data.

• 스마트미디어저널
• /
• 제10권2호
• /
• pp.110-118
• /
• 2021

4차 산업혁명의 핵심 성장 동력인 사물인터넷 (IoT) 기술은 자율 형으로 상호 소통하며 공간과 상황에 따른 데이터를 복합처리 할 수 있는 단계로 성장하였다. 이에 따라 IT 인프라 구조는 점점 복잡해지고 시스템을 안정적으로 유지하기 위한 모니터링 분야의 중요도가 높아지고 있다. 모니터링 기술은 과거에도 사용되었지만, 빠르게 변하는 ICT 기술에 대응할 수 있는 유연한 모니터링 시스템을 모색할 필요성이 있다. 본 논문은 오픈소스 기반 Prometheus 모니터링 시스템을 설계하고 테스트 하는 연구를 진행한다. IoT 디바이스를 기반으로 간단한 인프라를 구축하고 Exporter를 통해 디바이스에 대한 데이터를 수집한다. Prometheus는 데이터를 Pull 기반으로 수집한 뒤 Grafana를 사용하여 하나의 대시보드에 통합하고 데이터를 시각화함으로써 디바이스에 대한 정보를 모니터링 할 수 있다.

• 한국농공학회지
• /
• 제32권E호
• /
• pp.1-19
• /
• 1990

Abstract Over the last several decades, crop production in the United States increased largely due to the extensive use of animal waste and fertilizers as plant nutrient supplements, and pesticides for crops pests and weed control. Without the application of animal waste best management, the use of animal waste can result in nonpoint source pollution from agricultural land area. In order to increase nutrient levels and decrease contamination from agricultural lands, nonpoint source pollution is responsible for water quality degradation. Nonpoint source pollutants such as animal waste, ferilizers, and pesticides are transported primarily through runoff from agricultural areas. Nutrients, primarily nitrogen and phosphorus, can be a major water quality problem because they cause eutrophic algae growth. In 1985, it was presented that Watershed/Water Quality Monitoring for Evaluation BMP Effectiveness was implemented for Nomini Creek Watershed, located in Westmoreland County, Virginia. The watershed is predominantly agricultural and has an aerial extent of 1505 ha of land, with 43% under cropland, 54% under woodland, and 3% as homestead and roads. Rainfall data was collected at the watershed from raingages located at sites PNI through PN 7. Streams at stations QN I and QN2 were being measured with V-notch weirs. Water levels at the stream was measured using an FW-l Belfort (Friez FWl). The water quality monitoring system was designed to provide comprehensive assessment of the quality of storm runoff and baseflow as influenced by changes in landuse, agronomic, and cultural practices ill the watershed. As this study was concerned with the Nomini Creek Watershed, the separation of storm runoff and baseflow measured at QNI and QN2 was given by the master depletion curve method, and the loadings of baseflow and storm runoff for TN (Total Nitrogen) and TP (Total Phosphorus) were analyzed from 1987 through 1989. The results were studied for the best management practices to reduce contamination and loss of nutrients, (e.g., total nitrogen and total phosphorus) by nonpoint source pollution from agricultural lands.

• 한국정보통신학회논문지
• /
• 제22권4호
• /
• pp.575-580
• /
• 2018

본 논문에서는 병원에서 환자의 대기시간을 실시간으로 모니터링하기 위한 오픈소스 기반의 시스템을 제안한다. 환자의 위치 데이터를 실시간으로 분석, 처리하기 위한 고성능 스트림 처리 시스템을 비용 효율적으로 구축하기 위해서는 오픈소스 프로젝트를 활용하는 것이 필요하다. 빅데이터를 처리하기 위한 오픈 소스 시스템으로 다양한 하둡 서브프로젝트들로 구성된 하둡 에코시스템이 있다. 본 논문에서는 먼저 시스템 요구사항을 정의하고 하둡 에코시스템에서 이를 만족시키기 위한 몇 가지 오픈소스 프로젝트들을 선정한다. 그리고, 선정된 아파치 스파크, 아파치 카프카 등을 이용한 시스템 구조 설계 및 상세 모듈 설계를 제안한다. 제안된 시스템은 기존 시스템과의 연계 및 오픈소스 프로젝트를 통해 구축비용을 절감할 수 있으며, 또한 분산 스트림 처리를 통해 고성능과 안정성을 확보할 수 있다.

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.205-211
• /
• 2003

구조물의 안전성평가와 관련하여 비파괴평가 방법 중에서 음향방출 (acoustic emission, AE)기법에 의한 비파괴적 결함 발생 검출 기법은 다른 기법에 비해 비교적 새로운 평가기술로서 구조물의 이상 유무를 조기에 진단하고 주기적으로 감시할 수 있는 온-라인 모니터링에 적합하다. 그러나 한편, 국내에서는 아직까지 이에 대한 체계적인 연구가 미비한 실정이며, 대부분 값비싼 외국 시스템을 도입하여 사용하고 있는 실정이다 뿐 만 아니라 기존의 음향방출 시스템은 장치의 특성상 시스템이 매우 복잡하고 가격이 고가인 관계로 다양한 산업분야에서 실제 현장에 적용하기가 쉽지 않다. 따라서 본 연구에서는 기존의 음향방출 시스템이 가지고 있던 불필요한 낭비적인 요소들을 제거하고 실제 산업현장에 부합하는 위치표정 시스템을 개발하고자 하였다. 한편, 기존의 AE 시스템들은 위치표정을 위한 신호분석이 난해할 뿐만 아니라 박판 구조물의 경우는 위치표정이 매우 어렵다. 본 연구에서는 시간-주파수 해석에 널리 사용되고 있는 웨이블릿 기법을 이용하여 보다 정확한 위치표정을 진단하는 기법을 수행하였다.