• Smart Media Journal
• /
• v.12 no.3
• /
• pp.60-67
• /
• 2023

Hyperledger Indy is an open-source implementation of DID, a decentralized identity verification technology. Hyperledger Indy uses the RBFT consensus algorithm, and if there is a lack of consensus with more than a certain number of problem nodes in the pool, data is not added. This problem can be prevented in advance by adding a node, and a node monitoring system was implemented to operate automatically. The node monitoring system continuously checks the status of the pool and automatically adds nodes when there are more than a certain number of problematic nodes to prevent consensus problems from occurring. This proposed method can increase the availability of Hyperledger Indy and is a study that can be referenced in various blockchain services that use consensus algorithms.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.567-585
• /
• 2019

In the past two decades, structural health monitoring (SHM) systems have been widely installed on various civil infrastructures for the tracking of the state of their structural health and the detection of structural damage or abnormality, through long-term monitoring of environmental conditions as well as structural loadings and responses. In an SHM system, there are plenty of sensors to acquire a huge number of monitoring data, which can factually reflect the in-service condition of the target structure. In order to bridge the gap between SHM and structural maintenance and management (SMM), it is necessary to employ advanced data processing methods to convert the original multi-source heterogeneous field monitoring data into different types of specific physical indicators in order to make effective decisions regarding inspection, maintenance and management. Conventional approaches to data analysis are confronted with challenges from environmental noise, the volume of measurement data, the complexity of computation, etc., and they severely constrain the pervasive application of SHM technology. In recent years, with the rapid progress of computing hardware and image acquisition equipment, the deep learning-based data processing approach offers a new channel for excavating the massive data from an SHM system, towards autonomous, accurate and robust processing of the monitoring data. Many researchers from the SHM community have made efforts to explore the applications of deep learning-based approaches for structural damage detection and structural condition assessment. This paper gives a review on the deep learning-based SHM of civil infrastructures with the main content, including a brief summary of the history of the development of deep learning, the applications of deep learning-based data processing approaches in the SHM of many kinds of civil infrastructures, and the key challenges and future trends of the strategy of deep learning-based SHM.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.303-312
• /
• 2022

The natural hydrology and geological conditions of Xintian County was investigated, the development law of regional karst fissures was studied, the groundwater was collected and tested through a large-scale collection of groundwater to obtain the change law of chemical characteristics and water quality characteristics of groundwater, and the water quality evaluation was carried out for the regional karst groundwater in this paper. The results show that, the whole area is dominated by carbonate rock distribution areas, and the distribution of water systems is relatively developed. The strata are distributed from the Lower Paleozoic Cambrian to the Cenozoic Quaternary, and contain multiple first-order folds. The regional karst dynamic action is strong, and many tunnels or caves of different scales were shown, which are conducive to the enrichment of groundwater. Karst groundwater is neutral and alkaline water, the water is clear and transparent with good taste, and meets the national drinking water hygiene standards. The content of toxic trace elements and fluoride in the water source is generally lower than the limit value specified by the national standard and the accumulated toxic heavy metals is never found. The overall water quality is of good quality and suitable for the development and utilization of various purposes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.886-887
• /
• 2015

There is a growing interest in and demand for power industry acceleration and energy efficiency due to the increased energy consumption, environmental issues. Electronic power IT convergence industries such as intelligent power system has attract attention as new growth engine industry. A large number of sensors and motors are being installed following unmanned, automated in existing incoming panel management system. Observe the operating conditions and rapid response is essential. Despite the need for immediate action to be taken in the event of various later failed to recognize the emergency power can lead to accidents. In this paper, we propose a new architecture of the implementation of incoming panel monitoring system for power monitoring, fault detection, maintenance and system control using open source hardware platform and Wi-Fi networks.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.129-137
• /
• 2015

The objective of this study was to test the non-point source pollution (NPS) control by the vegetated ridge and silt fence through field monitoring. The experiment plots were established with three sizes which are 5 m width by 22 m length with 8 %, 3 % slope and 15m width by 15 m length with 6 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Water quality samples were monitored during the heavy rainfall occurred. The amount of rainfall from 4 monitored events ranged from 27.6 mm to 130 mm. The runoff reduction rate could vary depending on slope, soil, crop growth condition, rainfall amount, rainfall intensity, antecedent moisture condition, and many other factors. The runoff from vegetated ridge and silt fence treatment plots was 24.05 % and -8.28 % lower than that from control plot, respectively. The monitoring results showed that the average pollution loads reduced by vegetated ridge compared to control were BOD 36.62~53.60 %, SS 40.41~73.71 %, COD 39.34~56.41 %, DOC 49.08~53.67 %, TN 26.74~67.23 %, and TP 52.72~91.80 %; by silt fence compared to control were SS 41.73 %, COD 1.93 %, and TN 2.38 %. The paired t-test result indicated that the vegetated ridge and silt fence were statistically significant effect in SS load reduction, with a 5 % significant level. Monitored results indicated that vegetated ridge and silt fence were both effective to reduce the pollutant from the field surface runoff.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.25-35
• /
• 2015

As livestock manure treatment is becoming a problem, manure application in forest plantation is recommended as an alternative. In this study, to investigate the impact due to liquid manure application in forest plantation, soil, soil water and shallow groundwater quality had been monitored in poplar experimental site where the liquid manure (LM) was applied. Water samples were collected weekly during growing season (April to October) from 2008 to 2011. From the monitoring results, phosphorus concentration in the soil and soil water had no significant difference between LM and control plots. $NO_3$-N concentration of soil water in LM, however, showed higher concentration (13.6 mg/l at 40 cm, 35.1 mg/l at 80 cm) than control plot (1.5 mg/l at 40 cm, 0.5 mg/l at 80 cm). In case of shallow groundwater quality, pH, heavy metal, etc. were satisfied to the national agricultural water quality standard of groundwater and there were no significant difference between upstream and downstream. The $NO_3$-N concentration of shallow groundwater was also not exceeded the national drinking water standard. However, $NO_3$-N concentration in soil water and downstream of shallow groundwater had increased in 2011 when non-composted LM was applied mostly in non-growing season of tree (September). From the results, it is important to control nitrogen source, application time and decomposed or not when LM is applied. In addition, to investigate nitrate source, further long-term monitoring and modelling could be necessary.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.22-31
• /
• 2001

The purpose of this study is to compare calculated pollutant loadings using pollutant load unit factors and vector type coverage, and expected mean concentration(EMC) and raster type of digital elevation model(DEM). This study is also focusing on comparison of the advantages and the disadvantages of the two methods, and seeking for a method of calculation of pollutant loadings using DEM. Estimation of pollutant inputs using pollutant load unit factors has limitations in identifying seasonal variations of pollutant loadings. Seasonal changes of runoffs should be considered in the calculation of pollutant loadings from catchments into reservoirs. Evaluation of pollutant inputs using runoff-coefficient and EMC can overcome these drawbacks. Proper EMC and runoff-coefficient values for the Koeup stream catchments of the Koheung estuarine lake were drawn from review of related papers. Arc/Info was employed to establish database of spatial and attribute data of point and non-point pollutant sources and characteristics of the catchments. ArcView was used to calculate point and non-point pollutant loadings. Pollutant loads estimated with either unit factors-coverages, i.e., pollutant load unit factors and vector coverages f point sources and land use, or EMC and digital elevation mode(DEM) were compared with stream monitoring loads. We have found that some differences were shown between monitoring results and estimated loads by Unit Factors-Coverage and EMC-DEM. Monthly variations of pollutant loads evaluated with EMC-DEM were similar to those with monitoring result. The method using EMC-DEM can calculate accumulated flows and pollutant loads and can be utilized to identify stream networks. A future research on correcting the difference between vector type stream using flow direction grid and digitalizing vector type should be conducted in order to obtain more exact calculation of pollutant loadings.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.283-291
• /
• 2018

Objectives: To identify the current status of smartphone usage and to describe the needs for smartphone-based cardiac telerehabilitation of cardiac patients. Methods: In 2016, a questionnaire survey was conducted in a supervised ambulatory cardiac rehabilitation (CR) program in a university affiliated hospital with the participation of heart failure or heart transplantation patients who were smartphone users. The questionnaire included questions regarding smartphone usage, demands for smartphone-based disease education, and home health monitoring systems. Results were described and analyzed according to principal diagnosis. Results: Ninety-six patients (66% male; mean age, $5{\pm}11$ years), including 56 heart failure and 40 heart transplantation patients, completed the survey (completion rate, 95%). The median daily smartphone usage time was 120 minutes (interquartile range, 60-300), and the most frequently used smartphone function was text messaging (61.5%). Of the patients, 26% stated that they searched for health-related information using their smartphones more than 1 time per week. The major source of health-related information was Internet browsing (50.0%), and the least sought source was the hospital's website (3.1%). Patients with heart failure expressed significantly higher needs for disease education on treatment plan, home health monitoring of blood pressure, and body weight (${\chi}^2=5.79$, 6.27, 4.50, p < 0.05). Heart transplantation patients expressed a significant need for home health monitoring of body temperature (${\chi}^2=5.25$, p < 0.05). Conclusions: Heart failure and heart transplantation patients show high usage of and interest in mobile health technology. A smartphone-based cardiac telerehabilitation program should be developed based on high demand areas and modified to suit to each principal diagnosis.

• Geophysics and Geophysical Exploration
• /
• v.21 no.4
• /
• pp.262-272
• /
• 2018

A system for microseismic monitoring due to underground displacements is being operated in several mining areas in order to analyze ground subsidence. Microseismic monitoring system mainly consist of three components; 3-component geophone, data logger and analysis program. The previous analysis program had found the location of microseismic source by analysing only first arrivals of P-waves, but the upgraded analysis program has improved accuracy of the location by analysing both P- and S-waves. This analysis program also has upgraded the function to calculate the microseismic magnitude by using regional specific coefficient and microseismic amplitude. Also the program has upgraded the function to confirm visual location of microseismic source by superimposing field aerial photographs and the results.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.427-432
• /
• 2019

In this paper, we propose a home monitoring system using sound event detection based on a bidirectional gated recurrent neural network for the hard-of-hearing. First, in the proposed system, packet loss concealment is used to recover a lost signal captured through wireless sensor networks, and reliable channels are selected using multi-channel cross correlation coefficient for effective sound event detection. The detected sound event is converted into the text and haptic signal through a harmonic/percussive sound source separation method to be provided to hearing impaired people. Experimental results show that the performance of the proposed sound event detection method is superior to the conventional methods and the sound can be expressed into detailed haptic signal using the source separation.