• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.829-836
• /
• 2007

For the purpose of managing non-point sources, water quality control basins (WQCBs) are often designed to capture rainfall events smaller than extreme events. The design rainfall statistics and runoff capture rates for sizing a WQCB should be derived from the local long-term continuous rainfall record. In this study, the 31-year continuous rainfall data recorded in Busan is analyzed to derive the synthesized runoff capture curve incorporated with SCS curve number.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.451-454
• /
• 2003

Nonpoint source pollution of groundwater and subsurface water from irrigated agriculture is a major concern in many areas. In this study we aimed to investigate the effect of the water applied by irrigation in agricultural area on the transport of nitrogen and phosphorus originated from fertilizers applied to the surface of soil in agricultural activities. We first conducted investigation on the resdual concentrations of soil N and P in a selected agricultural area. And simulating the target area by column studies in the laboratory leaching extent of various components from the composite and urea fertilizers applied on the soil surface during irrigation was studied. Infiltration of water enhanced the leaching of nitrogen and phosphorus in both the rice paddy field soil and the patch soil. The downward N and P transport with infiltrating water was more pronounced in the patch soil column and the increased residual concentrations of N and P in the lower sections in the patch soil column was found with time.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.565-572
• /
• 2000

To quantitatively estimate mass contribution of long-range transported yellow sand, their sources should be separated independently from various local soil sources having similar elemental compositions. While it is difficult to estimate total mass loadings of pure yellow sand by traditional bulk analysis, it can be clearly solved by an particle-by-particle analysis. To perform this study, two yellow sand samples and three local soil samples were collected by a mini-volume sampler. These samples were three analyzed using a scanning electron microscope(SEM) equipped with an energy dispersive x-ray analyser (EDX) was used to obtain basic chemical information of individual yellow san particles. A total of 19 elements in a single particle were measured to develop a source profile with newly created homogeneous particle classes (HPCs) as chemical variables. The present study showed that the yellow sand samples as well as three local soil samples were characterized with reasonably well created HPCs. Finally the mass fraction of each HPC in each sample was calculated and then compared each other.

• Journal of Radiation Protection and Research
• /
• v.34 no.3
• /
• pp.144-150
• /
• 2009

This study examines how much the radiation dose rate around it varies if a crack occurs on the spent nuclear fuel rod. The spent nuclear fuel rod to be examined is that of Kori unit 3&4. The source terms are evaluated using the ORIGEN-ARP that is part of the version 5.1 of the SCALE package. The radiation dose rate is assessed using the TORT. To check if the structure of a fuel rod is appropriately modeled in the TORT calculation, the calculation results by the TORT are compared with those by the ANISN for the same case. From the code simulation, it is known that if a crack occurs on the spent nuclear fuel rod, the neutron dose rate varies depending on what material is the crack filled with, but the gamma dose rate varies irrespective of type of the material that the crack is filled with.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.794-800
• /
• 2008

Due to high oil prices and global warming problems, researching an alternative energy source and decreasing the energy usage will be the key in the future. Unlike other alternative energy sources, geothermal energy is less dependent on the surrounding environment. Geothermal energy is the ideal energy source for buildings due to the simple and space saving installation. The system is semi permanent once it is installed and this will help reduce the energy usage in controlling the climate in buildings. Geothermal energy does not emit carbon dioxide and other gases that are harmful to the environment. Therefore geothermal energy will be the key in solving high oil prices and a decrease in fossil fuels by applying the geothermal energy system to detached house to counter future energy crisis.

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.499-503
• /
• 2008

In order to control the non-point source pollution, a vegetative filter strips (VFS) was set up and the site-monitoring was performed. The objective of this study is to investigate the influence of the plant coverage on treatment efficiency of total nitrogen (T-N) and total phosphorus (T-P) using vegetative filter strips. According to the results, it seemed that the treatment efficiencies of T-N and T-P were closely related with the plant coverage ratio. The results showed that treatment efficiency of T-P average 50% at higher than 50% of the plant coverage and 20~23% at lower than 50% of the plant coverage. Also, the treatment efficiency of T-N increased with the increase of the plant coverage ratio.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.2
• /
• pp.132-139
• /
• 1993

TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.2
• /
• pp.135-146
• /
• 1990

The purpose of the study was to identify sources of particulate matters statistically and to estimate the mass contribution quantitatively in the Pusan metropolitan area. Then, the study has used the TTFA (target transformation factor analysis) model, a receptor model, to apportion aerosol mass with the raw data of 106 ambient samples characterized by 24 heavy metal variables. The TTFA was extensively applied to generate source profiles and their aerosol mass contributions. Though a couple of sources were not identified, four to seven sources were able to be extracted at 3 different sites (Jang Rim-Dong, Kwang Bok-Dong, and Kwang An-Dong) in Pusan area and finally mass conributions could be calculated.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.E
• /
• pp.358-363
• /
• 1993

Total particulate mater (TPM), $NO_2$ and $NH_3$ were measured simultaneously in the smoking and non-smoking locations during an eleven month period from March 1986 to January 1987 at three sites in Chicago : Illinois Institute of Technology Cafeteria, Rush-Presbyterian St. Lukes Medical Center Cafeteria and a downtown office building. From this study, the mean concentrations of $NO_2$ and $NH_3$ were not significantly different between the smoking and non-smoking locations at any sampling site ; however, there was a statistical difference for TPM between the smoking and non-smoking locations. Activity factor was useful for describing the contribution from indoor source. The linear regression analysis was reasonable method for discriminating the individual contribution of source to determine the emission factor. The TPM emission factor determined from this technique was in good agreement with value from the literature.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.551-558
• /
• 2012

Due to high oil prices and global warming problems, researching an alternative energy source and decreasing the energy usage will be the key in the future. Unlike other alternative energy sources, geothermal energy is less dependent on the surrounding environment. Geothermal energy is the ideal energy source for buildings due to the simple and space saving installation. The system is semi permanent once it is installed and this will help reduce the energy usage in controlling the climate in buildings. Geothermal energy does not emit carbon dioxide and other gases that are harmful to the environment. Therefore geothermal energy will be the key in solving high oil prices and a decrease in fossil fuels by applying the geothermal energy system to homes to counter future energy crisis.