• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.189-199
• /
• 2019

본 연구에서는 배연댐퍼 또는 제트팬과 같은 방재시설이 설치된 터널형 구조물(방음터널)에 대하여 방재시설 가동에 따른 화재연기의 거동을 수치해석적으로 고찰하고 해석결과를 비교 검토하여 다음과 같은 결론을 얻었다. 화재차량 천장부 개방 유무에 따라 방음터널 내 화재양상이 확연하게 달라지는 것을 확인하였으며, 방음터널의 주요 자재인 PC와 PMMA의 임계온도를 초과하지 않는 것으로 나타났다. 또한 배연댐퍼의 설치간격에 따른 해석결과, 방음터널 내 발생하는 최대 온도가 미설치시에는 최대 $552^{\circ}C$인 반면, 설치간격이 50 m인 경우에는 $405^{\circ}C$로 나타났으며, 제트팬 가동 여부에 따른 해석결과, 방음터널 내 발생하는 최대 온도는 제트팬 미가동시에는 $549^{\circ}C$인 반면, 가동시에는 $86^{\circ}C$로 나타나 화재시 피난환경과 방음자재보호에 있어 매우 유리한 환경을 조성할 것으로 예상되며, 향후 다양한 목적을 가진 터널을 대상으로도 이러한 기초연구의 활성화가 필요할 것으로 사료된다.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.119-124
• /
• 1994

The considerations in the noise control by enclosure are the rise of temperature and sound pressure, transmission loss, absorption coefficient of the materials, the structure of the soundproof panels, an opening and coincidence frequency. But it is very difficult that we obtain the accurate data about those in design, so, the noise reduction after enclosing does not correspond with the calculation. The difference of the noise reduction between the calculation and the measurement was 8.2dBA, and we can obtain the approximate result as the following formula which correct 10dBA, safely.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.191-198
• /
• 2005

The present study is a preliminary research improving the dwelling quality of one-room type multi-family housings around the university campus. The purpose of the study is to investigate the present condition of Indoor noise level using · residents' responses and field measurements. The respondents are 104 residents living in one-room type multi-family housings. The field measurements on equivalent noise level of indoor and outdoor were carried out in 6 subject house units during the $26th\~28th$ of November 2002. The results are as follows. 1) The residents show relatively non-positive responses at evening and night on the present condition of indoor noise. 2) They answer 'living equipment foise' and 'water hammer' as major types of indoor noise of house unit. 3) Outdoor noise levels, basic factor of noise environment in 6 subject buildings were distributed $52.8\~65.3dB(A)Leq_{5min}$ and were inappropriate to the standard for environmental noise, $55 dB(A)Leq_{5min}$. 4) Indoor noise levels of subject house units were measured as $27.5\~63.5dB(A)Leq_{5min}$, the average of each house unit except one house unit was higher than the level feeling as noise, 40dB(A). 5) It was found that the differences of indoor noise levels between subject house units were caused by 'residents' living noise', 'living equipment noise', 'water hammer', and 'walking and talking noise in stairs and corridors'. 6) Therefore, it is required to plan for improving the quality of noise environment in one-room type multi-family housing around the campus. For example, soundproof construction (including double window with pair glass and balcony), outdoor garden with trees and water for increasing natural sound, interior materials with sound absorbing power to absorb living noise, soundproof pipe or double surface pipe for decreasing 'water hammer', and noiseproof floors, etc. are required.

• 한국재료학회지
• /
• 제27권7호
• /
• pp.353-358
• /
• 2017

Recycled cenosphere, which is a hollow shaped particle from fly ash, has become attractive as a building material due to its light weight and excellent heat insulation and soundproof properties. In this paper, we investigated the effect of cenosphere size on the physical and optical properties. High brightness of cenosphere as raw material is required for a wide range of ceramics applications, particularly in fields of building materials and industrial ceramic tiles. Cenospheres were sorted by particle size; the microstructure was analyzed according to the cenosphere size distribution. Cenospheres were generally composed of quartz, mullite, and amorphous phase. Colour measurement corresponding to chemical composition revealed that the contents of iron oxide and carbon in the cenospheres were the major factors determining the brightness of the cenospheres.

• 한국방사선학회논문지
• /
• 제12권3호
• /
• pp.335-341
• /
• 2018

의료수준의 향상과 더불어 환자들의 첨단의료장비에 대한 기대수준이 증가하고 있으며 특히 자기공명영상(Magnetic Resonance Image : MRI)은 현재 모든 임상 분야에서 가장 핵심적인 영상진단 도구로서 사용되고 있다. 그러나 검사 중에 발생하는 심각한 소음으로 많은 환자가 심리적인 불안을 경험한다고 한다. 이에 본 연구에서는 자기공명영상검사실의 기존 헤드셋 흡음재에서 차음재를 추가한 헤드셋의 소음저감평가와 차음재별 영상 아티팩트(artifact) 유무를 알아보고자 하였다. 3D 프린팅한 헤드셋 내부에 흡음재(스펀지)와 차음재(아크릴판, 구리판, 3D copper plate)를 교차 배열하여 MRI 검사소음을 녹음하여 스피커로 같은 dB 값의 소음을 발생시키며 3D 프린팅 된 두부모형의 내부에 소음측정기로 dB 값을 측정하여 정량분석을 하며 자체 제작한 헤드셋을 물팬텀에 밀착시킨 후 MRI영상 아티팩트 유무를 검사한다. 드셋의 정량평가를 한 결과, 헤드셋 평균 dB 값은 81.8 dB로 나타났으며, 차음재를 추가한 헤드셋에서 가장 방음효과가 뛰어난 재료조합(구리, 아크릴판, 스펀지, 스펀지) 헤드셋의 평균 dB 값은 70.4 dB 값이 측정되었지만 MRI 시뮬레이션 결과 구리가 반자성체이기 때문에 아티팩트가 나타나 배제하였고 두 번째로 방음효과가 뛰어난 (스펀지, 아크릴판, e-copper plate, 스펀지) 헤드셋의 평균 dB 값은 70.6 dB 값이 측정되었고 MRI 시뮬레이션 결과 인공물 나타나지 않았다. 구리분말이 약 40%가 포함된 e-copper PLA로 출력한 재료를 동일하게 시뮬레이션을 한 결과 인공물 나타나지 않았으므로 3D 프린팅 재료의 사용이 적합하였고 구리보다 경제성이 우수하며 가공이 용이하므로 적합한 재료로 선정하였다. MRI관련 연구에 있어 3D 프린팅을 이용한 상호발전이 매우 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.297-302
• /
• 2011

Railway construction in the random vibration natural phenomena, as well as a relatively regular train loads for dynamic loads, such as a usability and safety should be ensured. Vibration due to train loads and seismic vibrations caused by wind compared to the typically very small in size, rather than the safety of the structure affects the usability. Recently in the downtown area, ground and underground facilities, such as a permanent facility that may cause excessive vibration increases, associated with the construction of these transportation facilities on ground vibrations of structures has been increasing concern and complaint. More recently, high-speed train vibration and noise due to furnace is increasing. In order to solve this problem, such as soundproof considering several feet, but by applying the vibration and noise reduction measures insufficient for the study is Free. In this study, track structure, track, and the inside of the building to support the system, the different forms of neurological history and share about the history cheonanahsan high-speed rail, if passed by the bus stop on the train loads of noise, and the history of interior noise and vibration measurement / analysis of measurement results to assess the relative comparison with the relevant provisions were reviewed. Based on this history, future plans for the design of the bridge to reflect the results of a study is intended to provide information. Waiting for the analysis of vibration and noise reduction, cheonanahsan history passed quietly in the train, on average, appeared to 67.53dB and 65.41dB nervous week on average, were measured with the history. Nervous week waiting room of history and the history cheonanahsan radically different shapes and sizes, so a direct comparison is impossible, but the vibration caused by the disc on the base of the polyurethane elastomer disk is not supported by GERB SYSTEM Waiting more effective in reducing the noise level considered in The main materials for railway and for the localization will help to ensure affordability is considered.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권6호
• /
• pp.638-643
• /
• 2013

유압시스템의 출력밀도를 높이기 위해 고압화, 대형화 되고 있으나, 유압동력 발생장치(HPU)를 구동할 때 110 dB(A) 정도의 높은 소음이 발생한다. 최근 산업안전규제 강화와 작업장 환경개선 요구 등으로 인하여 HPU의 소음저감을 위한 방안으로 실외나, 지하에 별도의 설치공간을 만들어 HPU를 이용하는 경우가 있었으나, 배관에서의 작동유 유동마찰로 인한 동력손실과 고장 났을 때 신속하게 대응하는데 문제가 있었다. 본 연구에서는 HPU의 동력변환 과정에서 필수적으로 발생되는 소음을 효과적으로 차폐시키면서 동력손실을 저감시키는 방음챔버(chamber)를 채용하여 소음특성을 개선하는 연구를 실험적으로 하였다.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.37-45
• /
• 2016

Purpose: According to the characteristic of hanok public building, Planning criterion of structure, technology, efficiency, design is needed which can includes various type of new-hanok type public buildings. In this paper, we collect expert opinions to be used as a basis for developing models of New-hanok type Public Buildings. Method: This study was conducted in Research Study and expert surveys. The Part of reviewing Study looked at conception of new-hanok type public buildings model development and overview planning criterion set briefly. Expert surveys were targeted to professors and architects who are related in new-hanok type public buildings model development research. Result: In this study, we suggest improvement direction about planning criterion of new-hanok type public buildings model development based on opinions collected by expert surveys. In conclusion, first, In concept and legal status, it is necessary to adjust clearly than the term and legal status of new-hanok type. Second, various applicability is needed by using new materials and new construction method at the part of planning elements. Third, 'composed structure-convergence type' and 'composed structure-juxtaposed type' should be clearly classified or combined at the part of Setting of type. Forth, improvement on heat insulation, soundproof, waterproof efficiency is demanded to roof, wall, window systems. Fifth, arranging revitalization plan is important.

• 한국환경과학회지
• /
• 제15권4호
• /
• pp.305-310
• /
• 2006

The color and structure of urban constructions is a factor of urban landscape and shows their characteristics. Hence the modern buildings deal with their materials and external appearance as an important factor, making up the urban image. But it was nearby impossible to evaluate the value of visual landscape with objective measuring method. Most of all, it depends on the subjective estimation of a few talented or high educated experts with a sense of beauty. Such kinds of estimation can in some cases include arbitrary interpretations. In relation to this kind of problems, it is tried here in this study to analyse the human response of brain wave pattern (EEG) with use of SD method, while the tested persons watch the urban landscape scenery constructed in a visual reality. The tested persons were 20 adult male and female with no color blindness and intact cognitive function. Light source with color filter was used for color environment in a dark soundproof chamber. The signal of EEG is analysed digitally and grouped into the ${\alpha}$ and ${\beta}$ waves. The result showed that relative power of ${\alpha}$ wave ratio increased in the natural landscape scenery with blue and green color. From these results it was possible to evaluate the human response, which is affected by urban and natural color and structure stimulation and it might be useful as an indicator of visual cognition amenity toward the design of urban construction environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.658-663
• /
• 2011

The purpose of this study is to develop an air-passing soundproofing panel with more improved structure to reduce the $CO_2$ emission and installation cost. To reduce the emission of $CO_2$ ; it is suggested to choose low $CO_2$ emission material relative to the aluminum and to reduce the materials by developing a specially designed air-passing soundproofing panel structure. First of all, we performed the flow analysis to predict the wind pressure according to the open angle of the air-passing soundproofing panel and the noise level analysis at the receiver point. To verify the simulation, a prototype of the soundproofing panel was made. The flow test in the wind tunnel and load test were performed. The economic evaluation for the installation of the air-passing soundproofing panel was performed and specifications of the installation was prepared. As the results of this research, it was verified that the wind load was reduced about 40% to that of the conventional one at 25m/s wind speed in the wind tunnel test. By applying the 4m span soundproofing wall with air-passing soundproofing panel and under the cost of 250 thousand $won/m^2$ instead of the conventional 2m span panel, the installation cost will always be lowered than the conventional one in the combination of (60:40~50:50) conventional to air-passing soundproofing panel from the economic evaluation. The 20% reduction of $CO_2$ was found by changing the 50% of aluminum soundproof panel to air-passing soundproofing panel.