• 산업식품공학
• /
• 제15권3호
• /
• pp.203-208
• /
• 2011

유기용매와 초임계유체를 사용하여 대두분말에서 지방성분을 추출하는 공정에서 분말화공정(분쇄)의 시간의 변화에 따른 입자도와 초고압처리에 의한 추출속도를 측정하였다. 대두분말의 입자가 작을수록 추출속도가 향상되었으면 이는 입자의 크기가 작아짐에 따라 전체적인 표면적이 증가하여 고-액추출에서 중요한 반응기작인 물질전달속도를 증가시켰기 때문이라 판단된다. 초고압공정을 적용 시 동일한 입자크기에서 추출속도가 현저히 향상되었으며 이는 대두분말 내부에서 발생하는 확산현상에 대한 저항이 초고압상태에서의 변화로 감소되었기 때문이라 사료된다. 초임계유출에 의한 추출은 수율이 낮은 단점이 있으나 입자의 크기가 큰 상태에서는 초고압처리를 전처리로 사용할 경우 시간당 추출량을 상당부분 증가시킬 수 있음을 보여주었으나, 입자크기가 작을 경우 초고압처리가 영향을 미치지 못함을 보여주었다.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.22-27
• /
• 2019

매니큐어는 손톱을 아름답게 꾸미기 위해 사용하는 색조화장품이지만 그 구성성분은 유해성분이 상당히 포함되어 있다. 매니큐어는 일반적으로 피막형성제, 색소, 용제, 계면활성제 및 침전방지제 등으로 구성되어 있다. 본 연구에서는 유해성 성분을 저자극, 친환경적인 성분으로 대체하여 4종의 매니큐어를 제조하고, 매니큐어로서 효력 비교실험과 안전성 및 안정성 시험을 실시하였다. 효력비교실험에서 쉘락/젤라틴 매니큐어 조성물(No. 4)이 내수성 및 적당한 강도를 지니면서 건조시간이 2분 내외로 대조군(4분 내외)보다 우수하고 악취도 개선되어, 피막형성제로서 가장 우수한 특성을 보여주었다. 또한 쉘락/젤라틴 매니큐어 조성물의 세포독성시험 결과, $1,000{\mu}g/mL$ 농도에서 70% 이상의 세포생존율로 시판되고 있는 매니큐어(50% 세포생존율)보다 독성이 낮았다. 4주간 온도 안정성 시험에서 저온에서는 색상의 변화가 없었으나, 상온과 고온에서 외관상변화 및 점도변화가 관찰되어 추후 제형의 개선이 필요한 것으로 생각된다.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.43-49
• /
• 2021

The Commercial polymeric membranes like Polysulfone (PSF), Polyvinylidene difluoride (PVDF) and Polyacrylonitrile (PAN) which are an integral part of water purification investigation were chosen for the shockwave (SW) exposure experiment. These membranes were prepared by blending polymer (wt. %) / DMF (solvent) followed by phase-inversion casting technique. Shockwaves are generated by using Reddy Tube lab module (Table-top Shocktube) with range of pressure (1.5, 2.5 and 5 bar). Understanding the changes in membrane before and after shock wave treatment by parameters, i.e., pure water flux (PWF), rejection (%), porosity, surface roughness (AFM), morphology (SEM) and contact angle which can significantly affect the membrane's performance. Flux values PSf membranes shows increase, 465 (pristine) to 524 (1.5wt%) LMH at 50 Psi pressure and similar enhancement was observed at 100Psi (625 to 696 LMH). Porosity also shows improvement from 73.6% to 76.84% for 15wt% PSf membranes. It was observed that membranes made of polymers such as PAN and PSF (of high w/w %) exhibits some resistance against shockwaves impact and are stable compared to other membranes. Shockwave pressure of up to 1.5 bar was sufficient enough to change properties which are crucial for performance. Membranes exposed to a maximum pressure of 5 bar completely scratched the surface and with minimum pressure of 1.5bar is optimum enough to improve the water flux and other parameters. Initial results proved that SW may be suitable alternative route to minimize/control membrane fouling and improve efficiency.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.517-524
• /
• 2023

BaTiO₃-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO₃ nanopowder and 10 wt% PVDF powder in solvent. BaTiO₃-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO₃ concentration. When the BaTiO₃ concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 ㎂ at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO₃ powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 ℃ for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 ㎂ when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO₃ after poling treatment. XRD patterns of the poled BaTiO₃-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO₃-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m². The generator was able to charge a 10 ㎌ capacitor up to 1.11 V and turn on 10 red LEDs.

• 대한약침학회지
• /
• 제26권4호
• /
• pp.319-326
• /
• 2023

Objectives: The study's goal was to find out whether Chrysanthemum rubellum extract has anti-diabetic properties by concentrating on α-glucosidase and the PTP-1B signaling pathway. C. rubellum flowers were used for extraction using Methanol/water (80/20) as solvent. Methods: LC-MS techniques was used to check the presence of phytoconstituents present in C. rubellum extract. In vitro antidiabetic activity was evaluated using α-glucosidase inhibitory activity and PTP-1B signaling pathway. On Streptozotocin (STZ)-induced rats with diabetes, the in vivo antidiabetic efficacy was assessed using a test for oral glucose tolerance. Results: The phytoconstituents identified in the extract of C. rubellum were apigenin, diosmin, myricetin, luteolin, luteolin-7-glucoside, and Quercitrin as compound 1-6, respectively. Results showed that diosmin exhibited highest α-glucosidase inhibitory activity i.e. 90.39%. The protein level of PTP-1B was lowered and the insulin signalling activity was directly increased by compounds 1-6. The maximum blood glucose levels were seen in all groups' OGTT findings at 30 minutes following glucose delivery, followed by gradual drops. In comparison to the control group, the extract's glucose levels were 141 mg/dL at 30 minutes before falling to 104 mg/dL after 120 minutes. The current study has demonstrated, in summary, that extract with phytoconstituents reduce blood sugar levels in rats. Conclusion: This finding suggests that extract may reduce the chance of insulin resistance and shield against disorders like hyperglycemia.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.239-245
• /
• 2023

Cellulose is an abundant biodegradable material in nature with excellent properties, but due to its poor processability, it has been widely studied for processing through modification. Cellulose acetate propionate (CAP) is a cellulose derivative in which the hydroxyl group of cellulose is replaced by acetyl and propionyl groups. CAP has several advantages, such as excellent solubility, structural stability, light and weather resistance, and good transparency. Porous nanofibers with excellent specific surface area, which can be applied in various fields, can be easily formed by the phase separation method using highly volatile solvents. High speed centrifugal spinning is a nano/micro fiber preparation method with advantages such as fast spinning and easy alignment control. In this study, a CAP/polybutylene succinate (PBS) spinning solution with chloroform as solvent was prepared to prepare porous microfibers and the fiber morphology was examined as a function of the disk rotation speed in an high speed centrifugal spinning device.

• 센서학회지
• /
• 제33권1호
• /
• pp.24-29
• /
• 2024

Inkjet printing technology is used to mass-produce displays and electrochemical sensors by dropping tens of pico-liters or less of specific-purpose ink through nozzles, just as ink is sprayed and printed on paper. Unlike the deposition method for vaporizing material in a vacuum, inkjet printing technology can be used for processing even under general atmospheric pressure and has a cost advantage because the material is dissolved in a solvent and used in the form of ink. In addition, because it can only be printed on the desired part, masks are not required. However, a technical shortcoming is the difficulty for commercialization, such as uniformity for forming the thickness and coffee ring effect. As sizes of devices decrease, the need to print electrodes with precision, thinness, and uniformity increases. In this study, we improved the printing and processing conditions to form a homogeneous electrode using Ag ink (DGP-45LT-15C) and applied this for patterning to fabricate a heat sensor. Upon the application of voltage to the heat sensor, the model with an extended width exhibited superior heat performance. However, in terms of sheet resistance, the model yielded an equivalent value of 21.6 Ω/□ compared to the ITO.

• 보존과학회지
• /
• 제35권6호
• /
• pp.681-688
• /
• 2019

본 연구에서는 목공예품에 사용되는 천연 및 합성 접착제의 특성을 평가하고, 온습도 변화에 따른 접착제와 목재의 열화 양상을 비교하였다. 아교 1종, 폴리초산비닐계 접착제 3종, 에폭시계 접착제 1종와 느티나무 목재를 선정하여 물리적, 화학적 특성평가와 내후성, 건조속도 평가를 진행하였다. 접착제 특성평가를 통해 아교와 폴리초산비닐계 1종의 접착강도가 각각 6.54 N/㎟과 7.01 N/㎟으로 나타났으며, 아교는 pH 7.03, 폴리초산비닐계 접착제는 pH 3.32~3.59으로 접착제로써 사용가능한 범위인 것으로 확인되었다. 내후성 실험결과 에폭시계 접착제는 열화 후 접착강도 감소폭이 가장 높았다. 접착제에 대한 가역성 실험을 통해 에폭시를 제외하고 수용성용매인 NaOH에서 가역성이 높은 것으로 나왔으나 처리 시 목재에 변색이 나타날 수 있으므로 사용 시 주의가 필요하다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제20권2호
• /
• pp.153-160
• /
• 2016

The objective was to investigate the hypoglycemic action of catalpol in spontaneous diabetes db/db mice. 40 db/db mice were randomly divided into five groups: model control gourp; db/db plus catalpol 40, 80, 120 mg/kg body wt. groups and db/db plus metformin 250 mg/kg group. Age-matched db/m mice were selected as normal control group. The mice were administered with corresponding drugs or solvent by gavage for 4 weeks. The oral glucose tolerance test was carried out at the end of $3^{rd}$ week. After 4 weeks of treatment, the concentrations of fasting blood glucose (FBG), glycated serum protein (GSP), insulin (INS), triglyceride (TG), total cholesterol (TC) and adiponection (APN) in serum were detected. The protein expressions of phosphorylation-$AMPK{\alpha}$1/2 in liver, phosphorylation-$AMPK{\alpha}$1/2 and glucose transporter-4 (GLUT-4) in skeletal muscle and adipose tissues were detected by western blot. Real time RT-PCR was used to detect the mRNA expressions of acetyl-CoA carboxylase (ACC) and Hydroxymethyl glutaric acid acyl CoA reductase (HMGCR) in liver. Our results showed that catalpol could significantly improve the insulin resistance, decrease the serum concentrations of INS, GSP, TG, and TC. The concentrations of APN in serum, the protein expression of phosphorylation-$AMPK{\alpha}$1/2 in liver, phosphorylation-$AMPK{\alpha}$1/2 and GLUT-4 in peripheral tissue were increased. Catalpol could also down regulate the mRNA expressions of ACC and HMGCR in liver. In conclusion, catalpol ameliorates diabetes in db/db mice. It has benefit effects against lipid/glucose metabolism disorder and insulin resistance. The mechanism may be related to up-regulating the expression of phosphorylation-$AMPK{\alpha}$1/2.

• 폴리머
• /
• 제30권3호
• /
• pp.230-237
• /
• 2006

단량체로 methyl methacrylate, n-butyl acrylate, 2-hydroxyethyl acrylate와 도막물성 향상 및 가교밀도를 극대화시켜 줄 관능성 단량체인 acetoacetoxyethyl methacrylate (AAEM)를 반응시켜 4원공중합체인 고형분 80%의 아크릴수지 (HSA-98-20, HSA-98-0, HSA-98+20)를 합성하였다. AAEM 성분이 함유된 아크릴수지의 점성도는 $1420\sim5760cps$, 수평균분자량 $2080\sim2300g/mol$, 다분산도 $2.07\sim2.19$ 및 전환율 $88\sim93%$이었다. 고형분 80%인 아크릴수지와 이소시아네이트 경화제를 상온에서 경화시켜 하이솔리드 도료(HSA-98-20C, HSA-98-0C, HSA-98+20C)를 제조하고 도막시편을 제작하여 각종 물성 시험을 수행한 결과, 제조된 하이솔리드 도료내에 AAEM 도입 전후의 도막물성이 비교실험에서 AAEM 도입후에 내마모성과 내용제성이 증진됨으로써 자동차 상도용 도료에의 적용이 가능케 되었다. 또한 점탄성 측정에 의한 도막의 경화거동에서 HSA-98+20C > HSA-98-0C > HSA-98-20C의 순서로 경화가 빨리 진행됨으로써, 유리 전이 온도 값의 증가함에 따라 경화속도가 빨라짐을 알 수 있었다.