• Advances in Energy Research
• /
• 제4권4호
• /
• pp.325-337
• /
• 2016

Cerbera Odollam (sea mango) is a proven promising feedstock for the production of biodiesel due to its high oil content. Fatty acid methyl esters (FAME) were produced as the final reaction product in the transesterification reflux condensation reaction of sea mango oil and methyl acetate (MA). Potassium methoxide was used as catalyst to study its reacting potential as a homogeneous base catalyst. The initial part of this project studied the optimum conditions to extract crude sea mango oil. It was found that the content of sea mango sea mango oil was 55%. This optimum amount was obtained by using 18 g of grinded sea mango seeds in 250 ml hexane. The extraction was carried out for 24 hours using solvent extraction method. Response surface methodology (RSM) was employed to determine the optimum conditions of the reaction. The three manipulated variables in this reaction were the reaction time, oil to solvent molar ratio, and catalyst wt%. The optimum condition for this reaction determined was 5 hours reaction time, 0.28 wt% of catalyst and 1:35 mol/mol of oil: solvent molar ratio. A series of test were conducted on the final FAME product of this study, namely the FTIR test, GC-FID, calorimeter bomb and viscometer test.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.283-292
• /
• 2023

Currently, spray coating has attracted interest in the mass production of anode catalyst layers for proton exchange membrane water electrolysis (PEMWE). The solvent in the spray ink is a critical factor for the catalyst dispersion in ink, the microstructure of the catalyst layer, and the PEMWE performance. Herein, various pure organic solvents were examined as a substitute for conventional isopropanol-deionized water (IPA-DIW) mixture for ink solvent. Among the polar solvents that exhibited better IrO₂ dispersion over nonpolar solvents, 2-butanol (2-BuOH) was selected as a suitable candidate. The PEMWE single cells were fabricated using 2-BuOH at various ionomer contents, spray nozzle types, and drying temperatures, and their performance was compared to the cells fabricated using a conventional IPA-DIW mixture. The PEMWE single cells with 2-BuOH solvent showed good performances comparable to the conventional IPA-DIW mixture case and highly durable performances under accelerated degradation tests.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.301-304
• /
• 2019

Microwave was designed for lipid extraction from green algae (Spirulina platensis). Microalgae-solvent (various solvents) were extracted and heated using microwave at 600 W for around 40 min. The maximum yield obtained within this period was 12.530% of lipid compared to just 1.293% for Soxhlet extraction. Lipid analysis revealed that those with higher essential fatty acid content consist of saturated fatty acid (SAFA) and polyunsaturated fatty acid (PUFA) which could be used for biodiesel production.

• KSBB Journal
• /
• 제15권4호
• /
• pp.346-351
• /
• 2000

식물세포 배양액으로부터 회수한 식불세포 내 수분 함 량에 따른 추출효율은 건조 정도 보다는 건조방법 에 상당 히 영향을 받음을 알 수 있었으며 건조하여 추출할 경우 사용되는 추출용매를 절약할 수 있었다. 여러가지 유기용 매를 이용하여 paclitaxe1의 추출 경향을 조사한 결과 메탄올의 경우 가장 적 은 양으로 가장 높은 paclitaxe1 회 수율을 얻어 가장 효과적임을 알 수 있었다. 추출방법의 경우 counter-current 형태를 사용할 경우 batch형태에 비하여 용 매 사용량을 줄일 수 있으며 paclitaxe1 회수율은 거의 차이가 없음을 알 수 있었다. Batch 형태를 이용한 메탄올 추출시 식불세포의 경우 4회 (회수율>99%), 식불세포조각의 경우 1회 (회수융>96%)의 추출로 대부분의 paclitaxe1 회수가 가능 하였다. 또한 메탄올 추출시 90% 이상의 머탄올 농도이변 충분하며 (회수율>98%), 추출시biomass와 메탄올 의 흔합비 (Kg biomass: L MeOH)는 1: 1, 추출시간은 1회 5분 이상이면 적당 하였다. 메탄올 추출불에 포함된 극성불 순물들은 다음 공정 인 액/액 (methylene chloride/ MeOH)추 출로 제거하여 정제공정에 사용되어 진다.

• 대한한의학회지
• /
• 제30권6호
• /
• pp.44-52
• /
• 2009

Objectives: This study was performed to evaluate the influence of different extracting solvents (water, methanol, ethanol, or n-hexane) on the anti-inflammatory efficacy of Scutellaria baicalensis (Lamiaceae), which has been used widely as a traditional herbal medicine for its anti-inflammatory properties. Methods: The ability of each extract to inhibit the production of pro-inflammatory mediators such as NO, TNF-$\alpha$, and $PGE_2$ by lipopolysaccharide (LPS)-stimulated mouse macrophage RAW 264.7 cells was measured. Results: The results showed that extraction solvents (except n-hexane) for S. baicalensis showed significant inhibitory effects on NO, TNF-$\alpha$ and $PGE_2$ production. Especially, methanol was the solvent with the greatest activity against NO and $PGE_2$ production. However, there was no difference between the extracts for inhibitory activity of TNF-$\alpha$. Conclusion: The present study suggests that methanol is a superior extraction solvent than water, ethanol, or n-hexane for maintaining the anti-inflammatory effects of S. baicalensis.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.501-504
• /
• 2003

A novel prepurification method was developed aiming at increasing yield and purity, also reducing solvent usage for purification of paclitaxel. This method was a simple and efficient procedure, for the isolation and prepurification of paclitaxel from the biomass of Taxus chinensis, consisting of micelle formation, followed by two steps of precipitation. The use of a micelle and precipitation in the prepurification process allows for rapid separation of paclitaxel from interfering compounds and dramatically reduces solvent usage compared to alternative methodologies. This prepurification process serves to minimize the size and complexity of the HPLC operations for paclitaxel purification. This process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. As much as possible, the process has been optimized to minimize solvent usage, complexity, and operating costs.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.196-200
• /
• 2003

A novel prepurification method was developed aiming at increasing yield and purity, also reducing solvent usage for purification of paclitaxel. The use of a micelle and precipitation in the prepurification process allows for rapid separation of paclitaxel from interfering compounds and dramatically reduces solvent usage compared to alternative methodologies. The prepurification process serves to minimize the size and complexity of the HPLC operations for paclitaxel purification. The process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. As much as possible, the process has been optimized to minimize solvent usage, complexity, and operating costs.

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.357-361
• /
• 2024

Halloysite nanotube (HNT) has a nanotube structure with the chemical formula of Al₂Si₂O₅(OH)₄·nH₂O and is a natural sediment of aluminosilicate. HNT has been used as additive to improve the mechanical properties of epoxy composites with exchange of amine group as a terminal functional group using huge amount of organic solvents. In order to save time and simplify complicated procedures, a dry coating machine was designed and used for amine group exchange in previous research. For better applications, it was conducted with different parameters and with scale up settings. Best condition was found to reduce usage of solvent, time and man power.

• KSBB Journal
• /
• 제29권5호
• /
• pp.343-352
• /
• 2014

In the present study, antioxidant activities of two crude pigments (acetone and MeOH) and their solvent fractions (n-hexane, 85% aq.MeOH, n-BuOH, and water fractions) from red crab shell were evaluated by measuring 1,1-diphenyl-2-picryl hydrazyl (DPPH), peroxynitrites, and degree of production of reactive oxygen species (ROS) in HT 1080 cells as well as the extent of oxidative damage of genomic DNA purified from HT 1080 cells. From comparative analysis, 85% aq.MeOH fraction showed the strongest scavenging effect on both peroxynitrite in vitro and intracellular ROS in HT 1080 cells. Protective activities of these samples against hydroxyl radical-mediated genomic DNA damage were also investigated. 85% aq.MeOH and n-BuOH fractions significantly inhibited oxidative damage of purified genomic DNA. On the other hand, we investigated their inhibitory effects on nitric oxide (NO) production in lipopolysaccharide (LPS)-stimulated Raw 264.7 cells. All samples significantly reduced NO production. Among the samples, n-hexane and water solvent fractions most effectively inhibited NO.