• 한국연초학회지
• /
• 제30권1호
• /
• pp.25-32
• /
• 2008

In this study, we compared three different pretreatment methods, such as block digestion, microwave digestion and solvent injection, coupled with Octopole Reaction System(ORS)-ICP-MS was used for the quantification of heavy metals in mainstream smoke of 2R4F reference cigarette, and then evaluated those efficiencies in the recovery, repeatability and reproducibility. In all methods, volatile heavy metals, As, showed the highest CV value, and Cd showed the lowest one. However, the solvent injection method showed the most stable recovery rate and CV value of 2.36 %. This method showed also advantages in time-consuming and compatibility with ICP-MS system. This results demonstrate that solvent injection method can be recommended as a superior pretreatment procedure to be able to reduce contaminants and spectral interference as well as loss of the elements interested.

• 한국분말재료학회지
• /
• 제6권2호
• /
• pp.132-138
• /
• 1999

A new binder system and debinding process for low carbon residue in the injection molding of Nd(Fe, Co)B powder are investigated. In the injection molding of magnetic materials, it is demanded to reduce carbon residue which deteriorates their magnetic properties. The binder system developed is composed of polyethylene glycols (PEGs) and polypropylene (PP). PEG was selected as a major binder is component to be extracted in a molecular state by solvent extraction in ethanol, which step would leave no residue. PP was selected as a minor binder component to be subsequently removed by thermolysis which step would leave carbon residue. The behaviors of solvent extraction with the variations of PEG molecular weight, temperature, and time were examined. The dependency of residual carbon content on thermolysis atmosphere was also studied. Opened pore channels introduced in a green body by the solvent extraction and microstructures of the sintered magnets were observed using SEM.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.22-24
• /
• 1998

1. INTRODUCTION : The phase inversion method is widely used to prepare a variety of polymeric membranes ranging from micro-filtration to gas separation. The final morphology obtained by immersion precipitation strongly reflects the thermodynamics and kinetics of the system involved. The equilibrium thermodynamics of the ternary system of polymer/solvent/ nonsolvent is still very important to understand and predict membrane structure. Polysulfone (PSf) and polyethersulfone (PES) are important polymers as membrane materials due to the chemical resistance, mechanical strength, thermal stability and transport properies. There are several reports on the experimental phase diagrams in ternary mixtures of PSf/solvent/nonsolvent, and PES/solvent/nonsolvent. It would be interesting to investigate the solution thermodynamics containing these two polymers since PES is slightly less hyclrophobic than PSf.

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.399-404
• /
• 1994

The non-Newtonian viscosities (the specific or intrinsic viscosities) of poly(L-proline) (PLP, $M_v$=19,000 and 32,000) in various mixed-solvent systems like water-propanol and acetic acid-propanol of varying compositions were measured during the reverse mutarotation (Form II ${\rightarrow}$Form I) by the application of external pressure (up to 4.5 psi). The non-Newtonian viscosity effect was found to be larger in acetic acid-propanol system than in water-propanol system and to somewhat decrease during the reverse mutarotation at a given solvent system. The non-Newtonian viscosity behavior of PLP in aqueous salt ($CaCl_2$) solution was also studied, from which it was found that the degree of the non-Newtonian effect decreased with increasing salt concentration, and increased with increasing PLP molecular weight. These findings could be explained in terms of conformational changes of PLP in solution (like the helix-helix or helix-coil transition) involved.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.216-224
• /
• 2001

HNS(hexanitrostilbene), one of the most important heat resistant explosive was recrystallized using organic solvent, nitric acid and dual solvent system of acetonitrile-toluene. The purification, analysis, type conversion method and its physical properties are described.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4167-4170
• /
• 2011

An inexpensive and efficient catalyst system has been developed for the N-arylation of phenylurea including a variety of aryl halides. This simple protocol uses $Cu_2O$ as the catalyst, microwave assisted, solvent- and ligand-free, $K_3PO_4{\cdot}H_2O$ as the base.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1351-1355
• /
• 1998

A simple apparatus for adding a modifying solvent to supercritical CO2 extractant was described. Small, fixed volumes (typically 100 μL) of liquid modifying solvents were delivered during the extraction process by use of an in-line high pressure loop injector and an air pump. Without disconnecting the extraction cell from the supercritical fluid extraction system, the modifying solvent was repeatedly delivered. The solvent modification device was optimized during the extraction of carbaryl and bis(acetylacetonato) copper(Ⅱ). Extraction recoveries from spiked filter paper and soil samples ranged between 22% and 109%, depending on the analyte and matrix components. The addition of polar modifying solvents were necessary to improve the extractability of the nonpolar CO2.

• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.44-49
• /
• 2014

혼합물의 최소자연발화온도는 가연성액체의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 Propionic acid와 3-Hexanone 계의 최소자연발화온도와 발화지연시간을 측정하였다. 2성분계를 구성하는 순수물질인 Propionic acid와 3-Hexanone 계의 최소자연발화온도는 각 각 $511^{\circ}C$와 $425^{\circ}C$로 측정되었다. 그리고 측정된 Propionic acid와 3-Hexanone 혼합물의 최소자연발화온도 실험값은 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다. 그리고 Propionic acid와 3-Hexanone 계는 일부 혼합 조성에서 두 개의 순수물질 가운데 작은 AIT 보다 낮게 측정된 AIT를 보이는 최소자연발화온도거동(Minimum Autoignition Temperature Behavior, MAITB)을 보이고 있다.

• 공업화학
• /
• 제20권6호
• /
• pp.685-691
• /
• 2009

하이드록시기 유무, 극성도, 분자 크기가 서로 다른 용매 6종의 단일 용매 또는 혼합 용매계 흄드 실리카 분산체를 제조하고 각 분산체의 점도 및 유변학적 거동을 용매계의 특성의 관점에서 고찰하였다. 하이드록시기 포함 용매에 실리카를 분산하였을 때 안정적이고 저점도의 sol을 형성하였고 하이드록시기가 없고 비극성인 용매는 고점도의 gel을 형성하였다. 비극성 용매계 실리카 분산체에 하이드록시기 함유 용매를 첨가하면 일정 함량까지는 점도 감소 현상을 관찰할 수 있었으며, 더 이상의 점도 변화가 발생하지 않는 최소 임계함량이 있었다. 최소 임계함량은 하이드록시기 미포함 용매의 극성도가 클수록 줄어들었다. 하이드록시기 포함 용매계 실리카 분산체가 안정적인 저점도의 sol을 형성하는데 이는 실리카 표면의 실란올기와 용매의 하이드록시기간의 수소결합을 통한 용매화로 저점도 sol을 형성하는 것으로 볼 수 있다. 비극성용매에 실리카를 분산하였을 때는 실리카 표면의 실란올기 사이의 수소 결합을 통해 응집이 일어나 고점도의 gel이 형성되었다.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.105-110
• /
• 1998

In the make-up product, Eye-shadow products have several purposes of enhancing product quality such as providing the beauty (variation of shape, clean appearance), feeling, continuity and adhesion. In this paper, newly developed wet type back injection press process is introduced so as to increase higher value products which providing various the beauty. The solvent takes an essential role to provide the fluidity of the powder bulk during the pressed-process of wet type pressed product. In this study, the effect of solvent in the oil binder was investigated, And the higher quality condition of the wet type pressed product was built to apply cosmetic preparation. Firstly, the system was designed powder phase as non treated pigment. The oil binder phase is categorized as hydrocarbons(Mineral oil, Squalane), Silicones(Methicone, Dimethicone ), esters (Octyldodecanol, Octyl Dodecyl Myristate). The solvent phase used was C 7-8 isoparaffin and Isopropyl Alcohol. The interaction of oil binder and solvent is investigated by measuring mass of final oil binder and the each solubility parameter. It was found that the higher the solubility the higher the degree of change in the final composition of the oil binder. In order to maintain the quality of the final product, the solvent used in pressed-process should be hydrophobic with oil binder.