• Journal of Surface Science and Engineering
• /
• v.24 no.1
• /
• pp.56-63
• /
• 1991

• The monthly packaging world
• /
• s.358
• /
• pp.84-90
• /
• 2023

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.303-316
• /
• 2018

In this study, I investigated the applicability of fluorescein-derived xanthene dyes to fluorescent pigment and the controllability of the optical properties of manufactured pigments. Eosin Y (D&C Red No.22) and phloxine B (D&C Red No.28) were mainly used as a dye to prepare the pigment. Dyes dissolved in a solvent were poured into a powder dispersed in the solvent, then dried and pulverized to fabricate the pigments. Optical characteristics related with fluorescence of the prepared pigment were measured. The optical properties of pigments were varied depending on the solvent used, content of the dye in the pigment, and the ratio of dyes when more then two dyes were mixed. According to the experiment result, it seems that some of the dyes attached to the powder showed fluorescence while the rest did not contribute to it. From the result of pigment washing experiment to explore the binding (or interaction) strength and characteristics of the powder-dye system constituting the pigment, it seems that there are two or more different interactions existing in the pigment system, one of which is relatively stronger than the solvent-dye interaction.

• Korean Journal of Microbiology
• /
• v.33 no.3
• /
• pp.181-186
• /
• 1997

Sugar ester compounds were synthesized in organic solvent using lipase. Anhydrous pyridinc was selected as ;I solvent because of reasonable solubility of sugar. The synthesis of sugar ester compound was catalyzed by Pseudomonas sp. lipase in the reaction system containing anhydrous pyridine as .i solvent and vinyl butylate as an acyl donor. The analysis of the reaction product by TLC and GC showed thilt monobutyryl and dibutyryl fructose esters were synthesized by transesterification reaction between fructose and vinyl butyrate. Optimal conditions for the transesterification reaction were as follows: the ratio of fructoselvinyl butylate, I : lO(M : M): reaction temperature, 40^{\circ}C.$, velocity of shaking, 150 rprn: concentration of enzyme, 10 mglml. The longer the reaction period, the higher the conversion rate, and the conversion rate reached up to 90% after about 10 days of reaction. Monobutyryl fructose was mainly synthesized in the early stage of reaction, but the amount of dibutyryl fructose increased gradually as the rcdction progressed. When a small amount of water was added to the reaction mixture (micro-water system), the reaction rate decreased, while that of rnonobutyr~l fructosc increased. Only monobutyryl fructose was obtained when 1% water was added to the reaction mixture.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.4
• /
• pp.329-335
• /
• 1999

Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic bronchitis and pulmonary emphysema. For the purpose of developing a transdermal preparation for clenbuterol, we attempted to select an optimal solvent system and permeation enhancer among fatty acids and fatty alcohols which are known to accelerate the penetration of various drugs in permeation experiments using hairless mouse skin and Franz diffusion cell. Apparent partition coefficient of clenbuterol was increased as pH of buffer solution was increased and solubility of clenbuterol was increased as the percent of propylene glycol(PG) in buffer solution(pH 10) was increased. Permeability of clenbuterol from different buffer(pH 10)/PG solvent mixtures was decreased as the percent of PG in pH 10 buffer solution was increased and among the various enhancers studied, lauryl alcohol was found to be the most effective enhancer, increasing the permeability of clenbuterol approximately 76-fold compared with control. Lauryl alcohol$(0{\sim}2%)$ enhanced the permeability of clenbuterol concentration-dependently. In this study, the optimal solvent system for the penetration of clenbuterol was found to be 50/50 buffer(pH 10)/PG solvent mixture containing 2% lauryl alcohol.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.36-37
• /
• 1990

In the past, facile dissolution of cellulose has been hampered by the lack of suitable nondegrading solvents. Recently, this problem has been solved in our laboratory by the discovery of an inexpensive, convenient solvent system, that is the mixture of $NH_3\;and\;NH_4SCN$, for cellulose. Also, the $cellulose/NH_3/NH_4SCN$ solution system has been found to form the anisotropic, i.e., liquid crystalline phase. It is believed that both the cholesterio and the nematic phase occur. This finding has prompted extensive on-going researoh on the formation of the liquid crystalline phase from an inexpensive natural source such as cellulose since the nematic phase is envisioned as an excellent precursor sources for products with desirable properties, for example, high modulus and high strength. This interest naturally leads to a desire to understand the theological properties of the nematic phase so that the transformation of the nematic phase to the solid state with desirable properties can be efficiently accomplished, ;From this point of view, the theological behavior of the $cellulose/NH3_/NH_4SCN$ system has been studied as a function of shear rate and shear stress over a wide range of solvent compositions, cellulose concentration, centrifugation and urea contents, Results indicate that the viscosity decreases with increasing shear rate. A marked shear thinning behavior and a quasi-Newtonian behavior were observed in the low shear rate region and in the high shear rate region, respectively for all solvent compositions. The $cellulose/NH_3/NH_4SCN$ solution system only exhibited the viscosity increase with increasing cellulose concentration and failed to show the viscosity drop generally observed at the point of incipience of liquid crystal formation, This may be due to the gel-like nature of the solution by the association of the rodlike molecules into bundles which may serve as crosslinking points giving the cellulose solution a network structure. Also, simply hydrogen bonding may be so restrictive of molecular mobility that a viscosity drop is blocked. In addition to the above results, yield stress and thixotropy were also observed in the $cellulose/NH_3/NB_4SCN$ solution system which are characteristics of liquid crystal and gel, The results of the effect of centrifugation on viscosity show that viscosity decreases by the application of centrifugation. This may be explained by the change of the piled polydomain structure to the dispersed polydomain structure due to the pressure gradient generated during centrifugation.ation.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.37-45
• /
• 2014

Solvent extraction experiments have been performed to separate Nd and Pr from chloride leaching solution of monazite sand using single Cyanex272 and mixed extractants as PC88A+Cyanex272 and PC88A+TBP. For this purpose, the effect of the concentration of extractants on the extraction and separation of the two metals were studied by varying the pH of aqueous solution. In the experimental ranges conducted in this study, the distribution coefficients of Nd were higher than those of Pr. In Cyanex272 system, our results indicated that concentration of extractant and initial pH did not affect distribution coefficients, but separation factor was increased with increasing initial pH. In binary extractant system, distribution coefficients were lower than those of single PC88A system, whereas separation factor was similar in both mixed and single extractant system.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.67-73
• /
• 2018

The objective of this study was to investigate the application of sulfate solvents for the economic and eco-friendly leaching of valuable metals from Au concentrate using an acid bake-water leaching system (AWS). AWS experiments were performed using an electric furnace with various baking temperatures ($100-500^{\circ}C$) and sulfate solvents ($H_2SO_4$, $K_2SO_4$, $(NH_4)_2SO_4$, $MgSO_4$, and $CaSO_4$). The efficiency of the valuable metal leaching increased as the baking temperature was increased to $400^{\circ}C$. Based on the AWS leaching time experiments, the maximum leaching rate occurred with the aqueous $(NH_4)_2SO_4$ solvent. This study demonstrates that aqueous $(NH_4)_2SO_4$ could be used as an effective solvent for valuable metal leaching using an AWS.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1775-1780
• /
• 2003

A continuous flow system has been developed to determine trace Cu(II), Mn(II), Ni(II) and Zn(II) in a large volume of water samples by a solvent sublation technique. The mixed solution of 1,10-phenanthroline(phen) and thiocyanate ion was used as ligands for the formation of their ternary complexes. The continuous system was constructed in this laboratory with a peristaltic pump, a mini shaker, three mixing bottles and a flotation cell by connecting each part with a polyethylene tube. The flotation conditions such as the flow rate of sample solution and the injection rates of ligand, buffer and surfactant solutions have been investigated to obtain the best sublation efficiencies. Each solution flowed into the flotation cell through each polyethylene tube by the peristaltic pumps. The ternary complexes were floated and extracted into MIBK in a flotation cell of 2 L by bubbling a nitrogen gas. The absorbances of extracted analytes in MIBK were directly measured by graphite furnace-AAS. The concentrations of 1,10-phenanthroline and thiocyanate ion were $2.6\;{\times}\;10^{-3}$ M and $2.3\;{\times}\;10^{-2}$ M in the mixed solution, respectively. The pH of sample solution was adjusted to 5.0 with a buffer solution and 1%(m/v) sodium lauryl sulphate solution was added as a surfactant to support the effective flotation of the complexes. The $N_2$ gas was bubbled at 30 mL/min for 90 minutes for 20 L of sample. Reproducible results of less than 10% RSD and recoveries of 80-120% could be obtained in real samples.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.203-213
• /
• 1996

In physical and reactive extraction system using equilibrium extraction equipment, the effects of extractants, concentration of extractant, and solvent on the degree of extraction were investigated. The organic acids used were acrylic acid and metacrylic acid. Extractants were n-octylamine(OA), di-n-octylamine(DOA), tri-n-octylamine(TOA) and tri-octylmetyl ammonium chloride(TOMAC ; Aliquat 336). We found that the degree of extraction for reactive extraction was 2~9 times than that for physical extraction and that effect of extractants on the degree of extraction of organic acid was the order of OA