• Journal of Pharmaceutical Investigation
• /
• v.40 no.4
• /
• pp.245-250
• /
• 2010

Porous poly(lactic-co-glycolic acid) microspheres (PLGA MS) have been utilized as an inhalation delivery system and a matrix scaffold system for tissue engineering. Here, gelatin (type A) is introduced as an extractable pH-responsive porogen, which is capable of controlling the porosity and pore size of PLGA microspheres. Porous PLGA microspheres were prepared by a water-in-oil-in-water ($w_1/o/w_2$) double emulsification/solvent evaporation method. The surface morphology of these microspheres was examined by varying pH (2.0~11.0) of water phases, using scanning electron microscopy (SEM). Also, their porosity and pore size were monitored by altering acidification time (1~5 h) using a phosphoric acid solution. Results showed that the pore-forming capability of gelatin was optimized at pH 5.0, and that the surface pore-formation was not significantly observed at pHs of < 4.0 or > 8.0. This was attributable to the balance between gel-formation by electrostatic repulsion and dissolution of gelatin. The appropriate time-selection between PLGA hardening and gelatin-washing out was considered as a second significant factor to control the porosity. Delaying the acidification time to ~5 h after emulsification was clearly effective to make pores in the microspheres. This finding suggests that the porosity and pore size of porous microspheres using gelatin can be significantly controlled depending on water phase pH and gelatin-removal time. The results obtained in this study would provide valuable pharmaceutical information to prepare porous PLGA MS, which is required to control the porosity.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.1
• /
• pp.8-16
• /
• 2014

The present study was carried out to evaluate the antioxidant and anti-inflammatory activities of three extracts (hot water, 50% ethanol and mixed solvent;water, ethanol, butylene glycol, propylene glycol) of dried chestnut, chestnut shell, chestnut leaves and dried chestnut leaves obtained from Castanea crenata tree. When conducted DPPH assay, radical scavenging activity of ethanol extract of chestnut shell was the highest with $IC_{50}$ $10.8{\mu}g/mL$ among four extracts from these parts (p < 0.05). In additional results by the xanthine oxidase assay, antioxidant activity showed that water extract of chestnut leaves showed the highest xanthine oxidase inhibitory activity in the tested extracts (p < 0.05). Futhermore, extracts of chestnut shell and leaves exhibited no cytotoxicity in RAW 264.7 cells (p < 0.05). Also, anti-inflammatory activity by NO assay showed LPS-induced NO was significantly inhibited following treatment with extracts of chestnut shell and leaves of 3mg/mL (p < 0.05). These data suggest that extract of chestnut shell have antioxidant and anti-inflamantory activity including chestnut leaves. Therefore, it is considered that Castanea crenata research range and selection of functional material can broaden chestnut shell to other fractions such as chestnut and chestnut leaves.

• Applied Biological Chemistry
• /
• v.6
• /
• pp.33-36
• /
• 1965

1. The extraction of securine, an alkaloid, from Securinega suffruticosa Rehder growing in Korea was investigated. 2. The distribution of the source plant in Korea is considered to be most intense among the Fareast countries. 3. The extracted material was identified to be genuine securinine viewing from melting point and microscopic observation. 4. The yield of the substance in this study was 0.075% in average. The less amount of recovery may be due to the collection of the plant in October instead of that in the prime season. 5. There should be more efficient way in the separation of resinous impurities from the crude product. Application of Chromatographic technique and selection of more efficient solvent will be investigated hereafter.

• Journal of Adhesion and Interface
• /
• v.6 no.3
• /
• pp.10-18
• /
• 2005

The hard coatings on the polycarbonate plate were performed with the object of substitution the glass in the car to the polycarbonate plate. In this research, tetraethyl orthosilicate (TEOS), methyltriethoxysilane (MTES) were used to prepare the coatings by sol-gel process. The optimum conditions and formulation to get the excellent physical properties were determined. The pretreatment condition of polycarbonate plate, the mole ratio of TEOS and MTES, selection of the solvent, the aging time, the amount of acid catalyst, and the number of folds of coating were characterized. Pretreatment with poly(methyl methacrylate) was very effective to increase the adhesion strength. The smooth coating which got the 2 H class in pencil hardness was formed in this research by sol-gel process.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.407-415
• /
• 2022

Surface coating of cathodes is an essential process for all-solid-state batteries (ASSBs) based on sulfide electrolytes as it efficiently suppresses interfacial reactions between oxide cathodes and sulfide electrolytes. Based on computational calculations, Li₃PO₄ has been suggested as a promising coating material because of its higher stability with sulfides and its optimal ionic conductivity. However, it has hardly been applied to the coating of ASSBs due to the absence of a suitable coating process, including the selection of source material that is compatible with ASSBs. In this study, polyphosphoric acid (PPA) and (NH₄)₂HPO₄ were used as source materials for preparing a Li₃PO₄ coating for ASSBs, and the properties of the coating layer and coated cathodes were compared. The Li₃PO₄ layer fabricated using the (NH₄)₂HPO₄ source was rough and inhomogeneous, which is not suitable for the protection of the cathodes. Moreover, the water-based coating solution with the (NH₄)₂HPO₄ source can deteriorate the electrochemical performance of high-Ni cathodes that are vulnerable to water. In contrast, when an alcohol-based solvent was used, the PPA source enabled the formation of a thin and homogeneous coating layer on the cathode surface. As a consequence, the ASSBs containing the Li₃PO₄-coated cathode prepared by the PPA source exhibited significantly enhanced discharge and rate capabilities compared to ASSBs containing a pristine cathode or Li₃PO₄-coated cathode prepared by the (NH₄)₂HPO₄ source.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.89-97
• /
• 1969

These studies were made on coating of fresh fruits and vegetables with PVC under view on preservation of fresh fruits and vegetables due to restrain water evaporation of them and control gas metabolisms. The results obtained, as selection of PVC materials availble for preservation of them, procedure of the coating, useful organic solvents, concentration of PVC solution and the time of dipping, and effects of the preservation of them, were summarized as follows: 1) PVC powder 222 and PVC powder 443 were surveyed as suitable materials for coating apple, and later was excellent in lustrous aspect. 2) The coating procedure which dipt into PVC solution was suitable to treat much within a short space of time, and using of ventillator accelerate rather evaporation of the organic solvent. 3) Aceton and methyethylketon as solvent of the PVC were, in purpose of storage only, avaible, while aceton was, in view ef taste, better. 4) 10% of the PVC solutions were better to preserve the freshness of apple and 5, 4, 1 and 0.5% of them in order were gradually decreased in preservability, and 15% of them as high concentration were looked like fermentation in one week after the coating. 5) The dipping time was also better n minute than 10 seconds in a preservation but 1-2 minutes could be applied owing to be not affected of the taste due to coating. 6) The freshness of treatment groups were extend about 48 days after coating in room temperature but control lost market value with 12 days. 7) Weight of control was decreased to 10-13% but treatment which was dipped into 10% of coating solution for one minute was decreased to 3.5-4.6% and treatment for four minutes was did to 2.9-3.0%. 8) Change in respiration was less is treatment groups than control in exhaustion of $CO_2$, and water soluble sugar, reduced sugar and pH were not changed almost due to coating. 9) Pannel discussion of the taste was indicated that control was better than treatments soon after coating, but treatments were rather than control last period of storage and treatment with aceton solvent specially was better than others.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2020

Termitomyces albuminosus has been recognized to have the best mushrooms in China, in terms of taste and aroma. The efficacy of these mushrooms has been recorded in the botanical list. However, research on the development of their artificial culture methods is necessary. In this study, we prepared an organic solvent extract and a hot water extract to understand the development of compounds and functional foods with antioxidant and anti-inflammatory activities. The IC₅₀ value of DPPH radical scavenging activity of the hot water extract (TA4) was 1.5 mg/mL and the IC₅₀ value of the MeOH fraction (TA2) was 1.93 mg/mL. The anti-inflammatory activity was investigated by the inhibition of NO production. EtOAc fraction (TA1) is a crude extract, but 79% of NO production was inhibited at 100 ㎍/mL. NO was not produced at 200 ㎍/mL. TA1-5-6, from TA1 inhibited NO production by 15% as compared to the positive control at 15 ㎍/mL, and completely inhibited NO production at 30 ㎍/mL. No cytotoxicity was observed at 50 ㎍/mL. TA2-1-5 from the MeOH fraction (TA2) inhibited more than 75% of NO production at 30 ㎍/mL; cytotoxicity was very low even at 50 ㎍/mL. In conclusion, by selective solvent selection, it was possible to manufacture an extract with no cytotoxicity and excellent biological activities. Furthermore, the extracts showed potential for developing various functional foods and drugs.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.678-683
• /
• 2012

Ceria is one of the most important catalytic materials which can be used in three-way catalysts, waste water treatment, petroleum refining, etc. So far, many methods have been studied to produce ceria nanoparticles. In this study, ceria nanoparticles were prepared via solvothermal synthesis using supercritical methanol in short reaction time using a batch reactor. The size of synthesized ceria nanoparticles in supercritical methanol is 6 nm without capping agent, which is smaller than that made in supercritical water at the same conditions of $400^{\circ}C$ and 30 MPa. Size difference results from density and critical point difference between water and methanol and slow reaction rate at the surface of ceria particles in supercritical methanol which reduces crystal growth rate. Several organic compounds were added to modify the surface of ceria nanoparticles, and in-situ surface modification was confirmed by FT-IR and TGA analysis. Surface modified ceria nanoparticles have excellent dispersibility in organic solvent. Size and shape of surface modified ceria particles can be controlled by adjusting molar ratio of modifier to precursor and selection of modifier.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.194-200
• /
• 2011

Diamondback moth (DBM, Plutella xylostella L.) is known as the most destructive pest of cruciferous crops worldwide. As most insecticides targeted to mainly larval stage, new insecticides which have hatching-inhibitory or ovicidal activity could be more efficient to control DBM. Therefore, we developed an easy and efficient method for screening ovicidal activity of DBM eggs using aluminum foil. The aluminum foil ($4{\times}12$ cm) coated with filtered juice of chinese cabbage leave (hereinafter called oviposition foil) exposed to 300 newly-emerged adults for 24 hours inside the rearing container. The oviposition foils were replaced every 4 days consecutively after mating, but it was better to discarded over then. Oviposition foil were divided into 6 to 12 pieces depending on egg mass volume. After dipping into test solutions for 10 seconds using faucet, oviposition foil pieces were placed into common petri dish, and then investigated hatchability. The effect of methanol solvent (50%) for 10 seconds dipping on the toxicity against DBM eggs was negligible. In addition, whether covering the petri dish or not should be dependent on nature of active compounds tested. With applying the new bioassay method, methanol extracts from 50 plants were tested the ovicidal activity to DBM eggs. Among them, four plant extracts; Angelica tenuissima root, Lycium chinense root, Cnidium officinale root and Polygala tenuifolia root, showed high ovicidal activity of over 90% control efficacy, against DBM eggs.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.183-205
• /
• 2007

An investigation was undertaken of the optimal discriminant model for predicting the likelihood of insolvency in advance for medium-sized firms based on the technology evaluation. The explanatory variables included in the discriminant model were selected by both factor analysis and discriminant analysis using stepwise selection method. Five explanatory variables were selected in factor analysis in terms of explanatory ratio and communality. Six explanatory variables were selected in stepwise discriminant analysis. The effectiveness of linear discriminant model and logistic discriminant model were assessed by the criteria of the critical probability and correct classification rate. Result showed that both model had similar correct classification rate and the linear discriminant model was preferred to the logistic discriminant model in terms of criteria of the critical probability In case of the linear discriminant model with critical probability of 0.5, the total-group correct classification rate was 70.4% and correct classification rates of insolvent and solvent groups were 73.4% and 69.5% respectively. Correct classification rate is an estimate of the probability that the estimated discriminant function will correctly classify the present sample. However, the actual correct classification rate is an estimate of the probability that the estimated discriminant function will correctly classify a future observation. Unfortunately, the correct classification rate underestimates the actual correct classification rate because the data set used to estimate the discriminant function is also used to evaluate them. The cross-validation method were used to estimate the bias of the correct classification rate. According to the results the estimated bias were 2.9% and the predicted actual correct classification rate was 67.5%. And a threshold value is set to establish an in-doubt category. Results of linear discriminant model can be applied for the technology financing banks to evaluate the possibility of insolvency and give the ranking of the firms applied.