• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.85-90
• /
• 2018

For the recovering rare earths in the spent nickel-metal hydride batteries, 10 M NaOH is added to the solution leached with sulfuric acid. The rare earth powders were precipitated at rate of 98 % at the condition of pH 2.0 or less. The recovered rare earth complex precipitate increased the leaching rate to nitric acid by heat treatment at $800^{\circ}C$ for 4 hours. Subsequently secondary precipitation was performed by adding oxalic acid to the solution in which the rare earth complex precipitate was dissolved. The re-precipitated rare earth powders were converted into oxide form through heat treatment at $800^{\circ}C$ for 4 hours with purity of 99.5 %.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.661-664
• /
• 1999

Proteins were extracted from an aqueous phase with reversed micelles. The effect of pH, and salt concentration on the solubilization of lysozyme in AOT/isooctane solution was studied to explore the potential for employing this solvent system in the large-scale recovery and concentration of proteins using liquid extraction. For pH values below the isoelectric point, pl of the protein, solubilization was high, probably owing to strong electrostatic interactions between the positively charged proteins and the anionic surfactant heads forming the inner micelle wall. At low ionic strength complete solubilization of the protein was observed. A pH higher than the pl of lysozyme and a salt concentration lower than that of the water pool were required for the recovery aqueous phase to ensure the back extraction of lysozyme from the AOT reversed micelles.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.961-966
• /
• 1993

The determination of noble metals such as Ir, Au and Ag in the ancient coins has been studied. For the measurement of the activity of $^{192}Ir,\;^{198}Au\;and\;^{110m}Ag$, radiochemical separations including solvent extraction and ion-exchange chromatography were applied to reduce the interference of high energy ${\gamma}$-ray emitted from various radionuclides with long half-life. As a results, $10^{-11}$ g/g level of Ir could be detected and it was found that the three kinds of the detection limits, i.e., critical, detection, quantitative limit, calculated by the method proposed by Currie, were enhanced. Prior to the re-irradiation with neutron, inactive carrier was added in order to determine the recovery yield of Ir in the radiochemical separation. The average recovery yields of Ir, Au and Ag in the 5 coins were 65.3%, 98.5%, 99.5%, respectively.

• Korean Journal of Veterinary Service
• /
• v.27 no.1
• /
• pp.17-29
• /
• 2004

A multiresidual analysis was performed to determine 12 sulfonamides(sulfacetamide, sulfadiazine, sulfisomidine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfisoxazole, sulfamethoxazole, sulfaquinoxaline, and sulfadimethoxine) in beef and pork simultaneously. The multiresidual analysis for the sulfonamides currently used was able to analyze 5 kinds of sulfonamides at the same time. The method of this 12 sulfonamides multiresidual analysis in this study was matrix solid-phase dispersion(MSPD) by high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC/MS). The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM: Ethylacetate(3:1), DCM:EA(9:1). Also, samples (84 beef and 205 pork samples) which were positive by EEC-4 plate test from 2001 to 2003 were tested to investigate the kinds of sulfonamides using HPLC. The results from the study were as follows; 1. The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM:Ethylacetate(3:1), DCM:EA(9:1). The method of extraction solvent with DCM:ethyl acetate(9:1) was the most excellent(87.7∼99.3%) in separation and reappearance. 2. In the LC/MS analysis. of sulfonamides, signal to noise ratio was showed relatively high in the positive mode and special ion in the quality analysis was determined via [M+H]$\^$+/ and m/z 156. A spectrum of sulfonamides was showed from all 12 sulfonamides. 3. The samples positive by the EEC-4 plate, a screening test method, were categorized by sulfonamides through Charm II and confirmed the kinds of sulfonamides through HPLC. 1) Among 84 beef samples positive by EEC-4 plate, 20 samples were positive by Charm II and identified as 7 sulfamethazine, 9 sulfadimethoxine, 1 sulfamonomethoxine and 3 unknown status. 2) Among 205 pork samples positive by EEC-4 plate, 42 samples were positive by Charm II and identified as 19 sulfamethazine, 1 sulfadimethoxine, 4 sulfamonomethoxine and 5 unknown status.

• Advances in environmental research
• /
• v.5 no.2
• /
• pp.125-140
• /
• 2016

The paper is focused on the economic analysis of two hydrometallurgical processes for recovery of yttrium and other rare earth elements (REEs) from fluorescent phosphors of spent lamps. The first process includes leaching with sulphuric acid and precipitation of a mixture of oxalates by oxalic acid, the second one includes leaching with sulphuric acid, solvent extraction with D2EHPA, stripping by acid and recovery of yttrium and traces of other rare earths (REs) by precipitation with oxalic acid. In both cases the REEs were recovered as oxides by calcination of the oxalate salts. The economic analysis was estimated considering the real capacity of the HydroWEEE mobile's plant ($420kg\;batch^{-1}$). For the first flow-sheet the cost of recycling comes to $4.0{\euro}kg^{-1}$, while the revenue from the end-product is around $5.40{\euro}kg^{-1}$. The second process is not profitable, as well as the first one, taking into account the composition of the final oxides: the cost of recycling comes to $5.2{\euro}kg^{-1}$, while the revenue from the end-product is around $3.56{\euro}kg^{-1}$. The process becomes profitable if the final RE oxide mixture is sold for nearly $50{\euro}kg^{-1}$, a value rather far from the current market prices but not so unlikely since could be achieved in the incoming years, considering the significant fluctuations of the Res' market.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.347-351
• /
• 2003

The extraction of glycyrrhizic acid from licorice using supercritical carbon dioxide (SCCO$_2$) was investigated with respect to the effects of extraction parameters such as the kind and amount of modifier, temperature, pressure, and extraction time. The conventional organic solvent extraction was also conducted for a quantitative comparison. The content of glycyrrhizic acid in crude extracts was analyzed by HPLC and the yield of glycyrrhizic acid was computed as a weight percent recovery. The optimal pressure and temperature for SCCO$_2$ extraction were found to be 40 MPa and 80$^{\circ}C$, respectively, when SCCO$_2$ was modified with 70% aqueous ethanol. Under the same pressure and temperature, the highest recovery was attained to be 104.57% in the first 60 min when the concentration of 60%, aqueous ethanol in SCCO$_2$ was 15%.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.211-226
• /
• 1988

Liquid chromatographic behavior of several metal ions in dithiocarbamate(DTC) chelates were investigated by reversed phase high performance liquid chromatography on Novapak $C_{18}$ and ${\mu}$-Bondapak $C_{18}$ columns. The optimum conditions for the separation of DTC-metal chelate were examined with respect to the pH, shaking time, flow rate, extraction solvent, and mobile phase strength. The metal ions in mixtures at trace level, chelated with some dithiocarbamate derivatives were separated successfully on Novapak $C_{18}$ column using acetonitrile/methanol/water or acetonitril/water mixtures as mobile phases. It was found that all DTC metal chelates studied were eluted in an acceptable range of capacity factor values ($0{\leqq}log\;k'{\leqq}1$). Although several foreign metal ions were coexisted, high recovery and good precision were attained ; 97.0-106.7 % for the recovery and 0.98-3.41% for the coefficient of variation. Under the optimum analytical conditions, trace metal ions in the composite water samples were determined sucessfully with in relative error of about {\pm}$6.7 %.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.420-426
• /
• 2020

A metal oxide semiconductor gas sensor is operated by measuring the changes in resistance that occur on the surface of nanostructures for gas detection. ZnO, which is an n-type metal oxide semiconductor, is widely used as a gas sensor material owing to its high sensitivity. Various ZnO nanostructures in gas sensors have been studied with the aim of improving surface reactions. In the present study, the sol-gel and vapor phase growth techniques were used to fabricate nanostructures to improve the sensitivity, response, and recovery rate for gas sensing. The sol-gel method was used to synthesize SnO₂ nanoparticles, which were used as the seed layer. The nanoparticles size was controlled by regulating the process parameters of the solution, such as the pH of the solution, the type and amount of solvent. As a result, the SnO₂ seed layer suppressed the aggregation of the nanostructures, thereby interrupting gas diffusion. The ZnO nanostructures with a sol-gel processed SnO₂ seed layer had larger specific surface area and high sensitivity. The gas response and recovery rate were 1-7 min faster than the gas sensor without the sol-gel process. The gas response increased 4-24 times compared to that of the gas sensor without the sol-gel method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.412-417
• /
• 2022

Capacitive-type humidity sensors with a high sensitivity and fast response/recovery times have attracted a great attention in non-contact respiration biological signal monitoring applications. However, complicated fabrication processes involving high-temperature heat treatment for the hygroscopic film is essential in the conventional ceramic-based humidity sensors. In this study, a non-toxic ceramic/metal halide (BaTiO₃(BT)/NaCl) humidity sensor was prepared at room temperature using a solvent-free aerosol deposition process (AD) without any additional process. Currently prepared BT/NaCl humidity sensor shows an excellent sensitivity (245 pF/RH%) and superior response/recovery times (3s/4s) due to the NaCl ionization effect resulting in an immense interfacial polarization. Furthermore, the non-contact respiration signal variation using the BT/NaCl sensor was determined to be over 700% by maintaining the distance of 20 cm between the individual and the sensor. Through the AD-fabricated sensor in this study, we expect to develop a non-contact biological signal monitoring system that can be applied to various fields such as respiratory disease detection and management, infant respiratory signal observation, and touchless skin moisture sensing button.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.73-80
• /
• 2022

Reduction smelting of spent lithium-ion batteries at high temperature produces metallic alloys. Following solvent extraction of the leaching solutions of these metallic alloys with either sulfuric or hydrochloric acid, the raffinate is found to contain Ni(II), Co(II), Mn(II), and Si(IV). In this study, two cationic exchange resins (Diphonix and P204) were employed to investigate the loading behavior of these ions from synthetic sulfate and chloride solutions. Experimental results showed that Ni(II), Co(II), and Mn(II) could be selectively loaded onto the Diphonix resin from a sulfate solution of pH 3.0. With a chloride solution of pH 6.0, Mn(II) was selectively loaded onto the P204 resin, leaving Ni(II) and Si(IV) in the effluent. Elution experiments with H₂SO₄ and/or HCl resulted in the complete recovery of metal ions from the loaded resin.