• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.44-54
• /
• 1999

Poly(ethylene 2,6-naphthalate), PEN, is a relatively well-known polymer used for engineering purposes. Naphthalene ring provides rigidity to the polymer backbone, thus, it elevated the glass transition temperature and enhanced mechanical properties. The structure and properties of PEN affect a processing conditions severely, and the high-thermal stability have been had a poor thermal processibility. Hence, the basic mechanism of solvent drawing, is very much the same as that of thermal drawing from glassy state since both involve the inducement of segmental mobility. The former achieves the goal by use of chemical energy, and the latter does so by use of thermal energy. Generally, the sorption of the solvent by the polymer has a plasticizing effect, and leads to a lowering of the glass transition temperature, $T_g$. In this paper, the dynamic viscoelasticity behavior in liquid-drawing process of an unoriented amorphous PEN films were investigated using Rheovibron. The results are as follows ： (1) For the drawing in silicone oil, the drawing below $T_g$. had $\alpha{2}$-dispersion due to an inhomogeneous taut structure. (2) For the drawing in water, the inhomogeneous taut structure reduced by the effect of plasticization even below $T_g$. (3) For the drawing in butanol, the only aliphatic segment in PEN have some molecular mobility but the mobility of the aromatic segment having naphthalene ring is nearly impossible. (4) For the drawing in dioxane/water mixing solvent, the solvent effect is complementary each other and accordingly the entire molecular conformation have stable state. (5) For the drawing in dioxane/butanol mixing solvent, the inhomogeneity of the taut structure and the aromatic segment increase with increasing the temperature and this tendencies correspond with that of the draw ratio.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.273-279
• /
• 2020

본 연구에서는 바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출(conventional solvent extraction, CSE), 마이크로웨이브를 이용한 추출(microwave-assisted extraction, MAE), 초음파를 이용한 추출(ultrasound-assisted extraction, UAE) 방법을 비교하였다. 추출 용매 종류(아세톤, 클로로포름, 에탄올, 메탄올, 메틸렌 클로라이드)에 따른 영향을 조사한 결과, 메탄올이 모든 추출 방법에서 가장 적합하였다. 메탄올을 이용한 MAE와 UAE의 경우, 단 1회의 추출로 대부분의 파클리탁셀 회수(>95%)가 가능하였다. 또한 MAE와 UAE의 경우 추출 온도(25-45 ℃), 마이크로웨이브 파워(50-150 W), 초음파 파워(180-380 W)의 증가에 따라 파클리탁셀 회수율이 증가하였다. 또한 SEM 분석을 통해 바이오매스 표면을 조사한 결과, 표면 구조가 CSE의 경우에는 조금 주름진 형태를 보인 반면 MAE와 UAE의 경우에는 강한 충격으로 매우 거칠고 파괴된 형태를 보였다.

• 환경위생공학
• /
• 제16권1호
• /
• pp.72-90
• /
• 2001

This study was conducted to evaluate desorption efficiencies accuracy and precision by $CS_2$ and thermal desorption method for polar and non-polar organic solvents collected on activated carbon(AC), activated carbon fiber(ACF), carbosieve SIII, materials tested were Methyl alcohol, n-Hexane, Benzene, Trichloroethylene, Methyl isobutyl ketone and methyl cellosolve acetate and six different concentration levels of samples were made. The results were as follows ; 1. Accuracy on kind adsorbent and desorption method was low. In case of $CS_2$ desorption solvent, Overall B and Overall CV on AC and ACF were 43% and 6.63%, respectively. In case of thermal desorption method, accuracy of thermal desorption method appeared higher than solvent desorption method by AC 18.0%, 3.54%, ACF 2.6%, 2.57%, Carbosieve SIII 13.7% and 1.97%, respectively. 2. In the concentration level III, accuracy of thermal desorption method on adsorbent was in order as follow ; ACF > Carbosieve SIII > AC in the methyl alcohol and Carbosieve SIII > ACF > AC in the rest of them all subject material and Concentration levels showed good precision at EPA recommend standard (${\leq}{\;}30%$) 3. DEs by type of organic solvent adsorbent and desorption method are as follows ; In the case that desorption solvent is $CS_2$, DE of Methyl alcohol is AC 47.5%, DE of all materials is ACF about 50%. In the case of thermal desorption method, DE of Methyl alcohol is AC 82.0%, ACF 97.4%, Carbosieve SIII 86.3%. DE of the later case is prominently improved more than one of former. In particular, Except that DE of EGMEA is ACF 88.5%, DE of the rest of it is more than 95% which is recommend standard MDHS 72. With the result of this study, in order to measure various organic solvent occurring from the working environment, in the case of thermal desorption method, we can get the accurate exposure assessment, reduce the cost, and use ACF as thermal desorption sorbent which available with easy.

• Preventive Nutrition and Food Science
• /
• 제16권3호
• /
• pp.267-271
• /
• 2011

Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.563-567
• /
• 2006

The application of a synergistic solvent extraction by the formation of ternary complex with pyrocatechol violet (PV) and benzalkonium chloride (BC) was studied for determination of trace Zn(II) in water samples. The pH of sample solution and the amount of PV and BC added were optimized for the formation of the stable complex, a proper solvent was selected for the effective extraction, and the concentration of nitric acid was fixed for the back extraction of the complex from the solvent. After the ionic strength of 100 mL sample solution was adjusted to 0.1 M by adding NaCl and the pH was fixed at 9 with a carbonate buffer, 1.0 mL of 2% PV solution was added to form Zn(II)-PV complex then the Zn(II)-PV/BC ternary complex was made by adding 1.0 mL of 10% BC solution. The ternary complex was extracted into 10 mL of MIBK. And the ternary complex was back-extracted with 10 mL of 1.0 mol/L nitric acid to determine Zn(II) by a flame atomic absorption spectrophotometer (flame-AAS). The interference of concomitant ions on the extraction of Zn(II) was investigated. This procedure was applied to the analysis of three real samples such as Dalbang-dam water, laboratory tap water and Jungnajin seawater. The recoveries of Zn(II) in spiked samples were 86.58-104.1%.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.262-271
• /
• 2023

For electrode stability and the electrochemical performance of the Li-ion cell, it is essential that the active ingredients and unique additives in the polymer binder be well dispersed with the solvent-based slurry. The efficient procedure used to create the slurry affects the rheological characteristics of the electrode slurry. When successively adding different steps of Nmethyl-2-pyrrolidone (NMP) solvent to the cathode composition, it is evenly disseminated. The electrochemical performance of the Li-ion cells and the electrodes made with slurry formed by single step and multiple steps of addition of NMP solvent are examined. To preform rheological properties of cathode electrode slurry on Ni-rich Lithium Nickel-Cobalt-Aluminum Oxide (LiNi_0.80Co_0.15Al_0.05) (NCA). Also, we investigate different step addition of electrode formation and mechanical strength characterization like peel strength. According to the EIS study, a multi-step electrode slurry has lower internal resistance than a single-step electrode slurry, which results in better electrical characteristics and efficiency. Further, microstructure of electrodes is obtained electrochemical performance in the 18650 cylindrical cells with targeted capacity of 1.5 Ah. The slurry of electrodes prepared by single step and multiple steps of addition of NMP solvent and its effect on the fabrication of 1.5 Ah cells. A three-step solvent addition on slurry has been found to be a lower internal resistance than a single-step electrode slurry as confirmed by the EIS analysis, yielding improved electrical properties and efficiency.

• 한방비만학회지
• /
• 제23권2호
• /
• pp.69-77
• /
• 2023

Objectives: Atriplex gmelinii C. A. Meyer is a halophyte belonging to the Chenopodiaceae family, and its young leaves and stems are used as fodder for livestock. The aim of the present study was to investigate the effects of A. gmelinii extract and its solvent fractions on lipid accumulation during adipogenesis of 3T3-L1 preadipocytes. Methods: The samples of A. gmelinii were separately extracted using methylene chloride and methanol. Subsequently, they were combined to formulate the initial extract, which was then partitioned based on polarity to prepare solvent fractions. Oil Red O staining was employed to measure lipid accumulation during the differentiation of 3T3-L1 preadipocytes. To verify cytotoxicity in 3T3-L1 cells, MTT assays were conducted. The expression levels of transcription factors in 3T3-L1 preadipocytes were measured through Western blotting analysis. Results: At 50 ㎍/mL, treatment of A. gmelinii extract and its solvent fractions during the differentiation of 3T3-L1 preadipocytes significantly diminished lipid accumulation with no noteworthy cytotoxicity on cell viability. Additionally, when investigating the biochemical pathways that underlie the prevention of lipid accumulation using solvent fractions, it was found that the n-BuOH and n-hexane fractions significantly decreased the expression of key transcription factors involved in the generation of fat, such as peroxisome proliferator-activated receptor γ (PPARγ), CCAAT/enhancer binding protein α (C/EBPα), and sterol regulatory element-binding protein-1c (SREBP1c). Conclusions: These findings indicate that A. gmelinii can effectively reduce the accumulation of fat in 3T3-L1 adipocytes, making it a potentially valuable material for mitigating and preventing obesity.

• 한국건축시공학회지
• /
• 제17권5호
• /
• pp.437-444
• /
• 2017

개량 아스팔트 방수시트 위에 폴리 우레탄 도막방수재가 도포되는 복합방수공법의 경우 시공성 향상을 위하여 도막 방수재에 유기용제를 희석해 사용하고 있지만, 유기용제가 폴리 우레탄 도막방수재의 완전 경화 전에 전부 휘발되지 못하고 시트재와 도막재 사이에 잔류하게 되고 이는 아스팔트 층을 융해시켜 방수층 손상 및 누수문제를 발생시켰다. 이에 용제에 의한 융해 문제를 개선하기 위해 내용제성이 강한 PA 필름을 개량 아스팔트 시트에 코팅(적층)하였고, 그 결과 융해에 대한 안전성을 육안을 관찰하였고, SEM 분석, EDX 분석을 통하여 PA 필름에 대한 내용제성을 정량적으로 확인하였다.

• 한국환경보건학회지
• /
• 제2권1호
• /
• pp.5-9
• /
• 1975

For analysis of Xanthene dyes according to the developing solvent and adsorbent was applied to Thin-layer chromatography with silicagel and cellulose plate. Silicagel chromato-plate used were prepared under different condition of activation. Using eight developing solvent, the influence of the condition for activation upon the separation of Xanthene dyes was investigated. The results are shown in Table 3. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) mixture and n-butanol+Ammonia water (4:1) mixture gave clear separation for Xanthene dyes, including Fluorescein, Erythrosine Rhodamin B, Eosine, Rose bengale, phloxine and Acid red those Rf values decrease in the described ordor. Methyl ethyl ketone+Acetone+$H_2O$ (10:0.1:0.4) was applied to two adsorbents which were purchased from different manufactures. The results of Chromatograms are obtained Figure 6.

• KSBB Journal
• /
• 제15권3호
• /
• pp.293-298
• /
• 2000

${\beta}$-Glucan a kind of polysaccharide which is particularly abundant in Agaricus blazei is known as the bioactive materials especially anticancer agents. The process development of the isolation and the purification process of water soluble ${\beta}$-glucans from A. blazei was achieved. and the process operation variables were optimized. Crude polysaccharides (CR.PS) were obtained from A. blazei by hot water extraction filtration solvent precipitation dialysis and freeze drying. Neutral and acidic fraction of polysaccharides were separated from crude polysaccharides by ion chromatography and then high molecular weight and low molecular weight fraction were separated from neutral fraction by gel chromatography. Quantitative and qualitative analysis of each compounds were performed with FT-IR NMR spectroscopy. Based on these analysis the optimal conditions of temperatures operating time organic solvent volume for precipitation and dialysis time were determined.