• Journal of Information Display
• /
• v.13 no.4
• /
• pp.151-157
• /
• 2012

A simple method of fabricating out-coupling structures was demonstrated via solution-processing to enhance light extraction from organic light-emitting diodes (OLEDs). Scattering layers were easily obtained by spin-coating an $SiO_2$ sol solution that contained $TiO_2$ particles. By introducing the scattering layer and the solution-processible corrugated structure as internal and external extraction layers, the OLEDs showed increased external quantum efficiency without a change in the electroluminescence spectrum compared to conventional devices. Using these solution-processible out-coupling structures, nearly all-solution-processed OLEDs with enhanced light extraction could be fabricated. The light extraction enhancement is attributed to the suppression by the out-coupling structures of the light-trapping that arose at the interface of the glass substrate and the air.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.64.1-64.1
• /
• 2012

Next generation displays such as high performance LCD, AMOLED, flexible display and transparent display require specific TFT back-planes. For high performance TFT back-planes, low temperature poly silicon (LTPS), and metal-oxide semiconductors are studied. Flexible TFT backplanes require low temperature processible organic semiconductors. Not only development of active semiconducting materials but also design and synthesis of semiconductor corresponding gate dielectric materials are important issues in those display back-planes. In this study, we investigate the high heat resistant polymeric gate dielectric materials for organic TFT and inorganic TFT with good insulating properties and processing chemical resistance. We also controlled and optimized surface energy and morphology of gate dielectric layers for direct printing process with solution processible organic and inorganic semiconductors.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.21-22
• /
• 2006

Significant progress has been realized in the design and synthesis of light emitting polymers with emission over the whole range of the visible spectrum. However up to seventy-five percent of charge recombination events can lead to triplet states that decay non-radiatively. Following the pioneering work in the field of small molecule organic light emitting devices it has been found that solution processible iridium polymer complexes can be used to harness the wasted triplet energy. In this paper new results concerning electrophosphorescence of solution processible tethered iridium polymer derivatives will be presented. Furthermore our approaches to the design of new high triplet energy conjugated polymer hosts will be reported.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.129-133
• /
• 2007

Significant progress has been realized in the design and synthesis of light emitting polymers that emit over the entire visible spectrum. However, up to seventy-five percent of charge recombination events can lead to triplet states that decay non-radiatively. Following the pioneering work in the field of small molecule organic light emitting devices, it has been found that solution processible iridium polymer complexes can be used to harness the wasted triplet energy. In this paper, new results with respect to the electrophosphorescence of solution processible tethered iridium polymer derivatives are presented. Furthermore, our approaches to the design of new high triplet energy conjugated polymer hosts are also reported.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.391.2-391.2
• /
• 2014

Solution-processible hybrid bipolar field effect transistors (HBFETs) with balanced hole and electron mobilities were fabricated using a combination of the organic p-type poly (3-hexylthiophene) (P3HT) layer and inorganic n-type ZnO material. The hole and electron mobilities were first optimized in single layer devices by using acetonitrile as a solvent additive to process the P3HT and annealing to process the ZnO layer. The highest hole mobility of the P3HT-only-devices with 5% acetonitrile was 0.15 cm2V-1s-1, while the largest electron mobility was observed in the ZnO-only-devices annealed at $200^{\circ}C$ and found to be $7.2{\times}10-2cm2V-1s-1$. The inorganic-organic HBFETs consisting of P3HT with 5% acetonitrile and ZnO layer annealed at $200^{\circ}C$ exhibited balanced hole and electron mobilities of $4.0{\times}10-2$ and $3.9{\times}10-2cm2V-1s-1$, respectively. The effect on surface morphology and crystallinity by adding acetonitrile and thermal annealing were investigated through X-ray diffraction and atomic force microscopy (AFM). Our findings indicate that techniques demonstrated herein are of great utility in improving the performance of inorganic-organic hybrid devices

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.49.2-49.2
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.454-457
• /
• 2008

We report the syntheses, photophysical properties and device performances of solution processible host material for green-phosphorescent OLEDs. The butterfly-shaped new host materials with nonconjugated linkage of carbazole and fluorene moieties have large triple energy band gap around 2.8 eV. All of the EL devices exhibited turn-on voltages in the range of 4.8-5.0 V. GH-4 exhibited the best performance with a maximum current efficiency and power efficiency of 21.1 cd/A and 7.9 lm/W.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.32-36
• /
• 2003

Co nanoparticles were prepared by the reverse micelle technique (NaBH₄reduction of cobalt chloride in a reversed micelle solution of didodecyldimethylammoniumbromide (DDAB)/toluene). The size and the shape of Co nanoparticles could be easily controlled by changing the water contents and micelle concentrations, and the solubility of Co nanoparticles was systematically tuned by choosing appropriate surface capping organic ligand molecules. Furthermore, a novel nanofabrication process was clearly demonstrated, which generated oxide over-coated Co nanorods from Co nanoparticles in organic solution by slow oxidation with an external magnetic field.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.975-978
• /
• 2008

Novel sulfur-containing aromatic compounds were developed as stable, high-performance organic semiconductors for OTFT applications. Of them, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) consisting of six aromatic rings gave high quality thin films by vapor deposition, which acted as a superior FET channel showing FET mobility as high as $3.0\;cm^2V^{-1}s^{-1}$. On the other hand, highly soluble 2,7-dialkyl[1]benzothieno[3,2-b][1]benzothiophenes ($C_n$-BTBTs) gave solution-processible OTFTs with FET mobility higher than $1.0\;cm^2V^{-1}s^{-1}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.533-538
• /
• 2011

A plastic-compatible low-temperature metal deposition and patterning process is essential for the fabrication of flexible electronics because they are usually built on a heat-sensitive flexible substrate, for example plastic, fabric, paper, or metal foil. There is considerable interest in solution-processible metal nanoparticle ink deposition and patterning by selective laser sintering. It provides flexible electronics fabrication without the use of conventional photolithography or vacuum deposition techniques. We summarize our recent progress on the selective laser sintering of metals and metal oxide nanoparticles on a polymer substrate to realize flexible electronics such as flexible displays and flexible solar cells. Future research directions are also discussed.