• 한국결정학회지
• /
• 제1권1호
• /
• pp.29-34
• /
• 1990

할로겐 램프를 열원으로 하는 image furnace를 사용하여 소위 traveling solvent floating zone법에 의해 Mg TiO3(가이킬라이트) 고용체 단결정을 육성했다. 육성된 결정은 직경 8mm, 길이 100mm이였으며 성장측은(1010)이었다. MgTiO, 상은 고온에서 일정한 공용영역을 나타내고 있으며 완만한 속도로 냉각시키면 TiO, 성분이 결정학적 방위의 콘트롤을 받아 (0001)면에 평행하게 용출됨으로써 광채효과를 나타낸다. 육성된 boul은 검은색을 띠고 있으나 1100℃ 산소분위기에서 annealing시킬 경우 반투명한 단양한 색깔을 보여 준다. 따라서 가이킬라이트는 새로운 종류의 인공캣츠아이로 활용될 수 있다.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.108-115
• /
• 2018

The increasing demands for three-dimensional (3D) electronic and optoelectronic devices have triggered interest in epitaxial growth of 3D semiconductor materials. However, most of the epitaxially-grown nano- and micro-structures available so far are limited to certain forms of crystal arrays, and the level of control is still very low. In this review, we describe our latest progress in 3D epitaxy of oxide and nitride semiconductor crystals. This paper covers issues ranging from (i) low-temperature solution-phase synthesis of a well-regulated array of ZnO single crystals to (ii) systematic control of the axial and lateral growth rate correlated to the diameter and interspacing of nanocrystals, as well as the concentration of additional ion additives. In addition, the critical aspects in the heteroepitaxial growth of GaN and InGaN multilayers on these ZnO nanocrystal templates are discussed to address its application to a 3D light emitting diode array.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.588-591
• /
• 1995

Single crystals of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) were grown by chemical vapor transport technique. Powdered polycrystalline samples of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) were also prepared by the direct combination of the elements. The chemical composition of these single crystals was determined by comparing their lattice parameters with those of the standard polycrystalline samples. The IR transmission range of single crystals of (ZnSe)1-x(CuMSe2)x (M=Al, Ga, or In) is slightly narrower than that observed for pure ZnSe. However, these materials still show good transmission in the long-wavelength IR range. The addition of small amounts of CuMSe2 (M=Al, Ga, or In) considerably increases the hardness of ZnSe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.62-65
• /
• 1995

CdTe crystals were grown by the vertical Bridgman method. P-type DcTe crystals were grown with Cd:Te= 1:1.001 wt. % ratio, while n-type CdTe crystals were 1:1 Also, CdTe:In crystals were investigated, Lattic constants were 6.489${\AA}$ for p-type 6.480${\AA}$for n=type and 6.483${\AA}$ for CdTe:In EPD was 10$\^$-3/-10$\^$4/cm$\^$-2/ for n-, p-type CdTd, 10$\^$4/-10$\^$5/cm$\^$-2 for Cd:Te:In using by E-Ag solution for (111) plane The carrier concentration, the resistivity and the Hall carrier mobility measured by the van der Pauw method were p=5.78${\times}$10$\^$15/cm$\^$-3/, $\rho$=20.2$\Omega$cm, ${\mu}$$\sub$p/=75.6cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for p-typem n=2.98${\times}$10$\^$16/cm$\^$-3/, $\rho$=0.214$\Omega$cm, ${\mu}$$\sub$p/=978.9cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for n-type and n=7.45${\times}$10$\^$16/cm$\^$-3/, $\rho$=1.54 ${\times}$10$\^$3/$\Omega$cm, ${\mu}$$\sub$p/=658.4 cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for CdTe:In crystals, Transmittance of p-type CdTe was 61% that of n-type was 65%, Cd:Te:In showed 60% IR transmittance.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.19-19
• /
• 2003

A cubic perovskite-type CaCu₃Ti₄O/sub 12/ compound has recently drawn a great attention because of an extraordinary high permittivity (～10⁴ at 1 kHz) at room temperature and its near temperature-independence over a wide temperature region, and thus numerous literature have been reported on CCTO polycrytalline ceramics and thin films. However, only a few literature have been reported on the CCTO single due to the lack of information about the CCTO primary phase field. On the basis of our recent experimental determination of the CCTO primary phase field, we could grow ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals using both top-seeded solution growth and flux growth methods. This presentation will include three major parts. In part I, the thermal decomposition reaction of CCTO and its primary phase field in the CaO-CuO-TiO₂ ternary system will be presented. Detailed growth conditions of ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals and characteristics of as-grown crystals will be followed in Part II. Part III will be comprised of dielectric properties of as-grown ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals. Our experimental results will be compared with those of previous reports for discussion.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.88-89
• /
• 2000

The properties for self-frequency doubling (SFD) is unique phenomena for a small number of special single crystals. It is known that there are serious limitations to vary the concentration of active ions, for example high doping of active ions from 1 to 50 atomic %, in nonlinear materials. Until now, the Nd:YAl$_3$(BO$_3$)$_4$ (YAB) and Nd:(Ce,Gd)Sc$_3$(BO$_3$)$_4$ (CSB) crystals with high doping rates are well studied for the application of SFD purpose. They have much useful SFD properties, but also have big problems in crystal growth. In case of YAB crystal, it can be grown by solution melt method with very low growth rates and easy occurrence of inclusions. In case of CSB crystal, it has optically heterogeneity problems because of disarrangement of ions in huntite structure [1]. These problems make above crystals not so attractive for optical applications. Some popular nonlinear materials, such as LiNbO$_3$(LN), KTiOPO$_4$(KTP), LiB$_3$O$_{5}$ (LBO) crystals, are impossible to substitute by Rare Earth activators because of their crystallo-chemical problems of structure. When we dope active ions with the requisite concentrations for laser generation, it results in decreasing of optical quality of crystals or destroying of acentrosymmetric structure. (omitted)d)

• 한국결정학회지
• /
• 제3권1호
• /
• pp.37-43
• /
• 1992

비선형광학 단결정인 KTiOP04는 Nd:YAG 레 이저의 제2고조파 발생장치로 가장 널리 이용되 는 물질이다. 본 연구에서는 낮은 점도를 갖는 3K2W04. P2O5 응제를 이용하여 TSSG법에 의한 KTiOP04 단결 정 육성 실 험 을 하였다. KTiOP04 육 성에 적합하도록 온도구배가 작은 전기로와 정밀 한 회전인상장치를 제작하였으며,용액 내 수직온도 구배는 용액표면과 용액 밑부분의 온도차가 1℃로 매우 작았다. 성장 과정의 관찰과 조절이 용이하도록 종자정을 용액 표면에 위치시켰다. 용액의 조성은 66.7mol%의 KTiOP04를 포함하도록 고정하였으며 이 용액의 포화온도는 1020℃ 였다. 냉각속도가 0 2℃/h, 결정의 회전속도가 50 rpm인 성장조건에서 a-, b-, c-축으로의 길이 가 각각 23 ×25 ×25mm3인 포유물이 없는 양질의 단결정을 얻을 수 있었다. 성장된 K,Tiop04 단결정은 크게 발달한 (201)면과 (011), (110), (100) 면들로 이루어져 있었으며 (101) 면이 관찰되기도 하였다.

• 한국결정학회지
• /
• 제3권2호
• /
• pp.120-128
• /
• 1992

BaTiO3 단결정을 용액의 서냉속도를 달리하면서 TSSG법으로 육성하였으며, 성장된 단결정의 결정외형, 결정 결함, 분역구조 등을 관찰하였다. 0.5℃/hr이 하의 속도로 서 냉함으로써 비교적 등차원적인 큰 단 결정을 육성할 수 있었으며, 성장된 BaTiO3 단결정 은 |111|면이 가장 잘 발달된 외형을 나타내었다. 용 액 냉각속도가 너무 빠르거나 용액내의 수직 온도구 배가 너무 크면 용액이 불안정해지므로, 침상의 Ba6 TiL7040 결정상이 석출된다. 성장된 결정내에 평행 한 쐐기모양의 lamella 분역 집단이 이와 수직하게 진행하는 lamella 분역 집단과 불규칙한 경계를 이루 고 있으며, 이들은 x-ray topography에서 현저한 회 절 명암 차이를 나타낸다. 단결정을 127℃ 이상으로 가열하면 입 방정으로 상전이 된다. 상전이 전단이 이 동할 때 정방정 영역에서는 연속적 분역 재배열이 이루어 지고 입방정 영역에서는 규칙적인 음력변형이 나타나며, BaTiO의 PTF정벽면은 |110|에 대해 약 9°기울어진 면으로 이루어진다.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.625-631
• /
• 2014

To investigate the deformation properties of TiC-(5-20) mol% Mo solid solution single crystals at high temperature by compression testing, single crystals of various compositions were grown by the radio frequency floating zone technique and were deformed by compression at temperature from 1250K to 2270K at strain rates from $5.1{\times}10^{-5}$ to $5.9{\times}10^{-3}/s$. The plastic flow property of solid solution single crystals was found to be clearly different among a three-temperature range (low, intermediate and high temperature ranges) whose boundaries were dependent on the strain rate. From the observed property, we conclude that the deformation in the low temperature range is controlled by the Peierls mechanism, in the intermediate temperature range by the dynamic strain aging and in the high temperature range by the solute atmosphere dragging mechanism. The work softening tends to become less evident with an increasing experimental temperature and with a decreasing strain rate. The temperature and strain rate dependence of the critical resolved shear stress is the strongest in the high temperature range. The curves are divided into three parts with different slopes by a transition temperature. The critical resolved shear stress (${\tau}_{0.2}$) at the high temperature range showed that Mo content dependence of ${\tau}_{0.2}$ with temperature and the dependence is very marked at lower temperature. In the higher temperature range, ${\tau}_{0.2}$ increases monotonously with an increasing Mo content.

• 한국결정성장학회지
• /
• 제3권1호
• /
• pp.12-17
• /
• 1993

KTP단결정의 육성을 수열법에 의해 행하였다. 결정육성에 사용한 KTP분말은 $KH_2PO_4와 TiO_2$의 화학양론적 혼합물을 $800^{\circ}C$ 에서 고상반응 시킨 뒤 이를 $250^{\circ}C$ 의 4m KF용액중에서 수열처리시켜 단상으로 제조하였다. KTP 결정육성에 있어 가장 효과적인 수열용매는 KF와 $K_2HPO_4$용액이었으며, 이들 용액중 KTP의 용해도는 $350~450^{\circ}C$의 측정 온도범위에서 positive이었다. 양질의 종자결정은 380~430^{\circ}C$ 의 온도범위에서 수평온도 구배법에 의해 얻을 수 있었다. 종자결정의 육성에 있어 큰 성장속도를 나타내는 수열조건은 다음과 같다. 즉, 육성방법;수직온도 구배법, 수열용매;4m의 KF 또는 $K_2HPO_4$용액, 온도범위;$400~450^{\circ}C$, 압력범위;$1000~1500kg/cm^2$이며 이때 KTP의 용해도는 결정성장에 충분하였다. 이상과 같은 수열조건하에서 KTP종자결정은 c축 방향으로 약 0.06~0.08mm/day의 성장속도를 나타내었다. 그리고 육성결정의 형태는 (100), (011), (201)면이 잘 발달하는 경향이 있었다.