• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.329-341
• /
• 2012

Magai Wareiishi Jizo (Buddhist statue carved on rock surface) is close to shoreline and a part of rock block is periodically immersed by seawater. Rock material of the Wareiishi-jizo statue is composed mainly of medium or coarse-grained biotite granite and very durable. However, physical properties of the rock have been changed according to the complex interactions of the salt solution and surrounding environment. Exfoliation of the rock surface is a serious condition by salt crystallization. Exfoliation (14.6%) is concentrated on the upper part of the rock block with mainly boundary of seawater as the center. On the other hand, lower part of the rock block show black layers by contaminants deposition. In addition, brown discoloration and biological contaminants is overlapped. Rock surface show high discoloration rate of 50.5% (black discoloration, 29.2% > yellow discoloration, 14.1% > brown discoloration, 4.4% > green discoloration, 2.9%). Upper part of the rock block had a lot of change in the physical properties than lower part that is immersed by seawater. In particular, surface properties of the rock block was very weak state at the boundary surface of seawater permeation.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.304-310
• /
• 1997

In greenhouse, a mixed solution of Mn-54, Co-60, Sr-85 and Cs-137 was applied to the soil of culture boxes 2 days before sowing cucumber and at 4 different times during its growth for measuring their transfer factors (TFs) for fruit and migration in soil. TFs varied with radionuclide, application time and harvest time by factor of up to about 60. Variations in TFs with application time showed different patterns among radionuclides. TFs decreased on the whole in the order of Sr-85 > Mn-54 > Co-60 > Cs-137. TFs of Mn-54, Co-60 and Cs-137 mixed with topsoil before sowing were a little higher than those for the soil-surface application made at an early growth stage while no difference in Sr-85 TF was found. After harvest, soil concentrations of the radionuclides applied at an early growth stage were examined. They decreased with increasing soil depth and 80${\sim}$99% of the radioactivity remained in the top 3cm. Soil pemeation of the radionuclides migration decreased in the order of Sr-85 > Mn-54 > Co-60 > Cs-137. The present data can be utilized in estimating radionuclide concentration in cucumber fruit, taking proper measures for its harvest and consumption and designing the best way of soil decontamination following an radioactive deposition during the cucummber growing season.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.817-824
• /
• 1996

Removal of Cu impurities on Si substrates using remote H-plasma was investigated. Si substrates were intentionally contaminated by 1ppm ${CuCI}_{2}$, standard chemical solution. To determine the optimal process condition, remote H-plasma cleaning was conducted varying the parameters of rf power, cleaning time and remoteness(the distance between the center of plasma and the surface of Si substrate). After remote H-plasma cleaning was conducted, Si surfaces were analysed by TXRF(total x-ray reflection fluorescence) and AFM(atomic force microscope). The concentration of Cu impurity was reduced by more than a factor of 10 and its RMS roughness was improved by more than 30% after remote H-plasma cleaning. TXRF analysis results show that remote H-plasma cleaning is effective in eliminating Cu impurity on Si surface when it is performed under the optimal process condition. AFM analysis results also verifies that remote H-plasma cleaning makes no damage to the Si surface. The deposition mechanism of Cu impurity may be explained by the redox potential(oxidation-reduction reaction potential) theory. Based on the XPS analysis results we could draw a conclusion that Cu impurities on the Si substrate are removed together with the oxide by a "lift-off" mechanism when the chemical oxide( which forms when Cu ions are adsorbed on the Si surface) is etched off by reactive hydrogen atoms.gen atoms.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.4
• /
• pp.282-291
• /
• 2018

The pristine fluorine-doped $SnO_2$ (abbreviated as FTO) inverse opal (IO) was developed using a 410 nm polystyrene bead template. The nanolayered copper tungsten oxide ($CuWO_4$) was decorated on the FTO IO film using a facile electrochemical deposition, subsequently followed by annealing at $500^{\circ}C$ for 90 min. The morphologies, crystalline structure, optical properties and photoelectrochemical characteristics of the FTO and $CuWO_4$-decorated FTO (briefly denoted as $FTO/CuWO_4$) IO film were investigated by field emission scanning electron microscopy, X-ray diffraction, UV-vis spectroscopy and electrochemical impedance spectroscopy, showing FTO IO in the hexagonally closed-pack arrangement with a pore diameter and wall thickness of about 300 nm and 20 nm, respectively. Above this film, the $CuWO_4$ was electrodeposited by controlling the cycling number in cyclic voltammetry, suggesting that the $CuWO_4$ formed during 4 cycles (abbreviated as $CuWO_4$(4 cycles)) on FTO IO film exhibited partial distribution of $CuWO_4$ nanoparticles. Additional distribution of $CuWO_4$ nanoparticles was observed in the case of $FTO/CuWO_4$(8 cycles) IO film. The $CuWO_4$ layer exhibits triclinic structure with an indirect band gap of approximately 2.5 eV and shows the enhanced visible light absorption. The photoelectrochemical (PEC) behavior was evaluated in the 0.5 M $Na_2SO_4$ solution under solar illumination, suggesting that the $FTO/CuWO_4$(4 cycles) IO films exhibit a photocurrent density ($J_{sc}$) of $0.42mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE, denoted as $V_{RHE}$), while the FTO IO and $FTO/CuWO_4$(8 cycles) IO films exhibited a $J_{sc}$ of 0.14 and $0.24mA/cm^2$ at $1.23V_{RHE}$, respectively. This difference can be explained by the increased visible light absorption by the $CuWO_4$ layer and the favorable charge separation/transfer event in the cascading band alignment between FTO and $CuWO_4$ layer, enhancing the overall PEC performance.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.21-26
• /
• 2020

An autonomous driving system is based on the deep learning system built by big data which are obtained by various IoT sensors. The miniaturization and high performance of the IoT sensors are needed for diverse devices including the autonomous driving system. Specially, the miniaturization of the sensors leads to compel the miniaturization of the fixer structures. In the viewpoint of the miniaturization, metallic structure is a best solution to attach the small IoT sensors to the main body. However, it is hard to manufacture the small metallic structure with a conventional machining process or manufacturing cost greatly increases. As one of solutions for the problems, in this work, metallic FDM (Fused depositon modeling) based on metallic filament was proposed and the FDM process was investigated to fabricate the small metallic structure. Final part was obtained by the post-process that consists of debinding and sintering. In this work, the relationship between infill rate and the density of the part after the post-process was investigated. The investigation of the relationship is based on the fact that the infill rate and the density obtained from the post-processing is not same. It can be said that this work is a fundamental research to obtain the higher density of the printed part.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.187-193
• /
• 2022

In the Yeongdong region of Gangwon-do, coastal areas are important resources in terms of cultural, social and economic aspects. However, the coast of Gangwon-do is experiencing severe erosion, and it is concerned that its adverse effects will gradually increase. In this study, coastline changes of Yangyang and Gangneung in Gangwon-do were tracked and analyzed over a long period of time. In order to build time series image data, aerial photos from the 1940s to the present were mainly used, and data from CORONA satellite, which operated from the 1960s to the early 1970s, were collected and used together. Using 51cm resolution ortho image and 2m resolution Digital Elevation Model(DEM) as reference, ground control points were selected to perform geometric correction on the aerial photos and CORONA images. Subsequently, Canny edge detector applied to these images to extract the coastlines. As a result of analyzing the extracted and vectorized coastlines by overlaying them in chronological order, erosion and deposition occurring around the artificial structures and on the nearby beaches were observed. In this study, the effect of seasonal variation, tide, and various coastal management including the beach filling were not considered. Because coastal erosion is greatly affected by geographic factors, each local government must find its own solution. Continuous research and local data accumulation are required.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.188-194
• /
• 2022

This work presents a non-destructive and straightforward approach to assemble a large-scale conductive electronic film made of a pre-treated single-walled carbon nanotube (SWCNT) solution. For effective electron transfer between the immobilized enzyme and SWCNT electronic film, we optimized the pre-treatment step of SWCNT with p-terphenyl-4,4"-dithiol and dithiothreitol. Glucose oxidase (GOx, a model enzyme in this study) was immobilized on the SWCNT electronic film following the positively charged polyelectrolyte layer deposition. The glucose detection was realized through effective electron transfer between the immobilized GOx and SWCNT electronic film at the negative potential value (-0.45 V vs. Ag/AgCl). The SWCNT electronic film-based glucose biosensor exhibited a sensitivity of 98 ㎂/mM·cm². In addition, the SWCNT electronic film biosensor showed the excellent selectivity (less than 4 % change) against a variety of redox-active interfering substances, such as ascorbic acid, uric acid, dopamine, and acetaminophen, by avoiding co-oxidation of the interfering substances at the negative potential value.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.8-17
• /
• 2023

In conventional liquid crystal display(LCD) manufacturing process, Indium Tin Oxide(ITO) as transparent electrode and rubbing process of polyimide as alignment layer are essential process to apply electric field and align liquid crystal molecules. However, there are some limits that deposition of ITO requires high vacuum state, and rubbing process might damage the device with tribolectric discharge. In this paper, we made nanocomposite with PEDOT:PSS and MWNT to replace ITO and constructed alignment layer by nano imprint lithography with nano wrinkle pattern, to replace rubbing process. These replacement made that only one PEDOT:PSS/MWNT film can function as two layers of ITO and polyimide alignment layer, which means simplification of process. Transferred nano wrinkle patterns functioned well as alignment layer, and we found out lowered threshold voltage and shortened response time as MWNT content increase, which is related to increment of electric conductivity of the film. Through this study, it may able to contribute to process simplification, reducing process cost, and suggesting a solution to disadvantage of rubbing process.

• The Korea Journal of Herbology
• /
• v.24 no.1
• /
• pp.99-110
• /
• 2009

Objectives : The current treatment regimens for patients with nephrotic syndrome due to membranous nephropathy(MN) are based on steroids or immunosuppressive therapy with the aim of reducing proteinuria and improving outcome. Although these treatments attenuate the deterioration of renal function in MN patients, it has been suggested that all are burdened by significant toxicity. Therefore, more specific and less toxic therapies are needed. This study was to evaluate the effects of Coptidis Rhizoma Extract(CRE) on the MN induced by cBSA in mice. Methods : Mice were divided into 4 groups. One group named for 'Normal' was injected with a saline solution not to be immunized. The rest groups were treated as follows; After mice were immunized with 0.2 mg of cBSA and Freund's complete adjuvant one time every two weeks for 6 weeks, they received intra-peritoneal injection of 10 mg/kg of cBSA daily for 4 weeks. Also, they were divided into 3 groups. The first named for 'Control' was not given CRE. The second for 'CRE-250' was given oral administration of 250 mg/kg of CRE daily for 4 weeks. The third for 'CRE-500' was given 500 mg/kg of CRE. All of mice were sacrificed 4 weeks after the first immunization. We measured a body weight and 24hrs proteinuria as well as serological analysis. The morphologic changes of renal glomeruli were also observed with a light microscope and an electron microscope. Results : The levels of 24 hrs proteinuria, triglyceride, IgG, IL-6 were significantly decreased in both CRE groups. And the level of IgM was significantly decreased in CRE-250 group. In histological findings of kidney tissue, thickening of GBM and deposition of electron-density were consideraly decreased in both CRE groups. Conclusions : The present study suggests that CRE is highly effective when treating mice with MN induced by cBSA. More clinical data and studies are to be done for efficient application.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.3
• /
• pp.43-56
• /
• 2024

In this study, we investigate wet absorption process and the performance and regeneration of Fe(II)EDTA^2- absorbents, electrodeposition of the reducing agent for recovery of metal powder and re-absorption performance using regenerated absorbed for the simultaneous removal of nitrogen oxides (NO) and sulfur oxides (SO₂) emitted from flue gas. As a result of a simultaneous absorption experiment of NO and SO₂ under the presence of oxygen, the antagonistic effects of SO₂ and O₂ in the absorption solution resulted in the regeneration of Fe(III)EDTA^- and Fe(II)EDTA-NO^2- to Fe(II)EDTA^2-, inducing the maintained neutral pH and maintained NO₂ absorption, thereby greatly improving the simultaneous absorption performance of NO and SO₂. In addition, after regenerating the Fe(II)EDTA^2- absorbent with Zn metal powder as a reducing agent, electrodeposition was performed to recover the remaining reducing agent. During the electrodeposition process, the high Zn recovery efficiency (approximately 57.50%) was observed at an applied voltage of 4 V, and the total absorption amount of NO was also significantly improved.