• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.53-58
• /
• 2015

Polycarbonate (PC)/graphene oxide (GO) composites with 3 phr of GO were prepared by using a twin screw extruder at 240, 260, and $280^{\circ}C$ after mixing the solution with chloroform. It was confirmed by DSC and TGA that the glass transition temperature ($T_g$) of PC/GO composites were not changed and the thermal stability was the best in case of the extrusion temperature at $260^{\circ}C$. Thermo mechanical properties of PC/GO composites according to extrusion temperatures were measured by dynamic mechanical analysis (DMA). Storage moduli of PC/GO composites were higher than that of pure PC and there was no detectable changes at varying the extrusion temperature. Based on these results, the extrusion temperature of PC/GO composites was fixed at $260^{\circ}C$. The degree of the chemical reaction of PC/GO composites with respect to the GO reduction time was confirmed by the C-H stretching peak at $3000cm^{-1}$ and the degree of the chemical reaction was similar to that of GO when the reduction time was 1 h. A decrease in the complex viscosity as a function of the GO reduction time was detected by dynamic rheometer, which may be originated from the enhancement of GO dispersion by PC-GO reaction. The GO dispersion was confirmed by scanning electron microscope (SEM).

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.197-203
• /
• 2011

This experiment was carried out to investigate the growth characteristics of virus-free sweetpotato in hydroponic bag culture. The rooted one-node and upper-shoot cuttings of 'Yeonhwangmi' and 'Mannamiwere' transplanted into the plastic bag (0.5 mm of thickness, $W300{\times}L1,200{\times}H120mm$) culture system filled with commercial horticultural media (TKS-2, Flora Gard Co.) and cocopeat + perlite (3 : 7, 5 : 5, 7 : 3, (v/v). Nutrient solution of National Horticultural Research Station in Japan was separately irrigated $3times{\times}30minutes$ per day (10:00, 14:00 and 20:00 with timer control) by the drip irrigation. The growth of two varieties was not significantly different among four substrates in 15 days, but it was excellent in commercial horticultural media (TKS-2) and cocopeat 3 : perlite 7 (v/v) in 20 days. The growth in 'Yeonhwangmiwas' promoted than that in 'Mannami', and the upper-shoot cuttings of 'Yeonhwangmi' and 'Mannami' showed a significant vine elongation (over 10 and 2 cm, respectively) compared to the one-node cuttings. Fresh weight and dry weight in cocopeat 3 : perlite 7 (v/v) were significant increased than that in cocopeat 7 : perlite 3 (v/v). Therefore, the bag culture system filed with cocopeat 3 : perlite 7 (v/v) was successfully applied on propagation of virus-free sweetpotato seedling, and the result expected that the bag culture system could be commercialized without high financial costs for farmers.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.163-170
• /
• 2004

Effect of several factors for Preparation of whole egg gel (WEG) on texture and color of WEG were investigated in this study. The factors studied were amount of water addition, heating temperature and time, pH and NaCl. The whole egg gel was prepared by mixing of whole egg and steaming at 100$^{\circ}C$ for 7 min followed by cooling at 22$^{\circ}C$ for 90 min. The results showed that the increase in water addition decreased significantly with viscosity values of whole egg solution (WES) and the addition of more than 50％ water resulted in a significant decrease in the stress at failure (SF) and the hardness of WEG. The color a and b values of WES decreased and the value of WEG also decreased significantly in negative range. The increase in heating temperature decreased the coagulation time and increased in SF while SF decreased. Addition of NaCl up to 1.3％ resulted a significant increase in SF and hardness and a little changes in color of WEG. As the pH of WES changed from 4.0 to 10.0, the viscosity of WES was minimal and SF and hardness were maximal at pH 6.0. The L and b values of WEG were significantly reduced at higher pH values of 8.0.

• Journal of Pharmacopuncture
• /
• v.19 no.4
• /
• pp.350-358
• /
• 2016

Objectives: This study was carried out to analyze the single dose toxicity of ShinEumHur (SEH) pharmacopuncture injected into the muscles of Sprague-Dawley rats. Methods: The SEH pharmacopuncture was made in a clean room at the Korean Pharmacopuncture Institute (K-GMP). After the mixing process with sterile distilled water had been completed, the pH was controlled to between 7.0 and 7.5. All experiments were conducted at Biotoxtech, an institution authorized to perform non-clinical studies under the Good Laboratory Practice (GLP) regulations. Sprague-Dawley rats were chosen for the pilot study. Doses of SEH pharmacopuncture, 0.25, 0.5 and 1.0 mL, were administered to the experimental groups, and a dose of normal saline solution, 1.0 mL, was administered to the control group. We examined the survival rate, weights, clinical signs, mean hematology parameters, mean clinical chemistry, necropsy and histopathological findings. This study was conducted under the approval of the Institutional Animal Ethics Committee. Results: No deaths or abnormalities occurred in any of the four groups. No significant changes in weight, hematological parameters or clinical chemistry between the control group and the experimental groups were observed. To check for abnormalities in organs and tissues, we used microscopy to examine representative histological sections of each specified organ; the results showed no significant differences in any of the organs or tissues. Conclusion: The above findings suggest that treatment with SEH pharmacopuncture is relatively safe. Further studies on this subject are needed to yield more concrete evidence.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.177-182
• /
• 2005

Montmorillonite (MMT) modified with siloxane diamine was reacted with a reactant obtained from 4,4'-diphenyl methane diisocyanate (MDI) and polyester type polyol, $Nippollan4010(\bar{M}_n2000)$. Finally, polyurethane (PU)/MMT composites were prepared by using 1,4-butane diol as a chain extender in $25\;wt\%$ solution of N,N-dimethyl acetamide (DMAc). It was expected that these nanocomposites had superior exfoliation property to that of MMT dispersed polyurethanes produced by simple mixing due to insertion of siloxane main chain to the silicate interlayer of MMT. Extent of reaction and formation of final products were analysed by using FT-IR spectroscopy. Dispersion into the PU and intercalation of MMT were identified by applying X-ray diffraction (XRD) and transmission electron microscopy (TEM). Tensile data were acquired by universal test machine (UTM). Thermal stability and variation of surface energy were characterized by thermal gravimetric analysis (TGA) method and measurement of contact angle on the synthesized composites, respectively. As the results the organo-MMT modified with siloxane diamine in the PU composites has an intercalated structure relatively well-expanded rather than a completely exfoliated structure. The tensile strengths and the moduli for the PU/organo-MMT composites were drastically enhanced in comparison to those of $PU/Na^+-MMT$ composites.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2017

The steel-plate concrete(SC) is used in a form of module assembly construction in the outer wall of nuclear-power plant and LNG containment. Since the steel-plate concrete modules are generally manufactured from the plant, the weight of SC has significantly effect on the total construction cost in the aspect of shipment. Therefore, the use of lightweight aggregates concrete(LWAC), which fill the inside of SC module can be a solution. However, the amount of used lightweight aggregates(LWA) is limited in the use of current concrete mixing process due to the concrete quality problems and it also determines the allowable minimum density of LWAC. In this research, the preplaced casting method is applied because of increasing the volume fraction of LWA significantly, which results from the producing process of pre-packing the LWA in the formwork and filling the interstitial voids between LWA using cement paste grout. The density and compressive strength of selected preplaced LWAC were $1,600kg/m^3$ and 30MPa and it was applied for the mock-up specimens of SC panel. It was used for the 3-point bending test for evaluating its structural performance. The results show that the preplaced LWAC can reduce the density of concrete with the adequate mechanical and structural performance.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.58-64
• /
• 2005

Several tests were conducted to determine the optimum operational conditions of soil washing techniques for floe-forming arsenic-contaminated soils, collected from D abandoned Iron-mine in Korea. The optimum cut-off size was 0.15 mm $(sieve\;\#100)$, about $94\%$ of the mass of soils. Both sodium hydroxide and hydrochloric acid were effective to remove arsenic and the optimum mixing ratio (soil [g] : washing solution [mL]) was 1:5 for both washing agents. Arsenic concentrations, determined by KST Methods, for the dried floe solids obtained from flocculation at pH 5-6 were $990\~1,086\;mg/kg$ dry solids, which were higher concentrations than at the other pH values. Therefore, batch tests for sequential washings with or without removing floc were conducted to find the enhancement of washing efficiencies. After removing floe with 0.2 M HCl, sequential washings of 1 M HCl followed by 1 M NaOH showed the best results (15 mg/kg dry soil). The arsenic concentrations of washing effluent from each washing step were about $2\~3\;mg/L$. However, when these acidic and basic effluents were mixed together, arsenic concentration was decreased to be less than $50\;{\mu}g/L$, due to the pH condition of coagulation followed by precipitation for arsenic removal.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.485-495
• /
• 2017

The purpose of this study is to evaluate the functionality and lightfastness of the natural pigments according to the type of Seokganju used as Dancheong. The commercially available red iron-oxide-based natural pigments that are called Seokganju and Daija manufactured by traditional methods in Korea and Japan were selected. The analysis of the constituent minerals and constituents of 8 kinds of collected Seokganju showed that most of them contained hematite. There are two types of Seokganju according to the $Fe_2O_3$ contents. The type of Seokganju can be characterized not only using the main component but also from the burn-out processing. The chromaticity results for Seokganju with a high $Fe_2O_3$ concentration indicate dark red or grayish brown, while those for Seokganju with a low $Fe_2O_3$ concentration indicate yellowish red or yellowish brown. Samples were prepared by mixing with a glue solution and functional properties were evaluated based on the opacity and spreadability. Coated samples were used in the lightfastness test. The spreadability and opacity of the pigments were measured differently depending on the main component. Most Seokganju samples a showed slight color change until $9,000kJ/m^2$ but rapid color changes were detected after $18,000kJ/m^2$. In particular, burnt Seokganju showed superior lightfastness.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.637-641
• /
• 2008

The aims of this research were to manufacture tailored powder activated carbon having a higher prechlorate removal efficiency and to compare perchlorate removal efficiency with different carbon materials for applying to the drinking water treatment plant. Activated carbon pre-loaded with cetyltrimethylammonium chloride(CTAC) has been researched to be an effective adsorbent for removing perchlorate in the water. 10,000 mg/L tailored powder activated carbon were manufactured by mixing 5.0 g of powder activated carbon(PAC) into 500 mL of 5,000 mg/L CTAC solution. The tailored powder activated carbon had 10 times higher perchlorate removal efficiency than virgin powder activated carbon. The residual perchlorate gradually decreased with the first 15 minute contact time with the tailored powder activated carbon, however, the longer contact time did not affect perchlorate removal. Tailored powder activated carbon by manufactured with 1,083 mg/g iodine value carbon had almost 4 times higher perchlarate removal efficiency than the 944 mg/g iodine value carbon. Dosage of 5 mg/L tailored powder activated carbon, which can adaptable dosage at the treatment plant, could decrease the perchlorate concentration from 50 $\mu$g/L to 15 $\mu$g/L.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.167-173
• /
• 1979

It is preented the removable moving screen media-activated sludge (REMSMAS) process by using the biological fixed-film systems. The substrate removal kinetic difference between the aeration-only completed mixing activated sludge (CMAS) process and REMSMAS process were observed. The substrate removal kinetics were developed based on the attached and suspended microbial growths. The units of the aeration-only CMAS process were continously operated with the normal detention time of 4.5, 6, 9.5 and 12 flours studies after steady-state condition and the operating of the REMSMAS units conducted with the normal detention time of 6 and 12 hours studies in nonsteady-state condition. The feed solution was diluted 18 times to the raw starch wastewater in of order to maintain the proper COD (950mg/l) and BOD (450mg/l) concentration. Design parameters related to the suspended microbial growths were caculated by the equations used in the aeration-only CMAS model and these parameters used to evalute the kinetic constants in the REMSMAS process. The kinetic constant values of $Y_2,\;K_d,(\mu_{max})_s\;and\;K_s$ from Monod equations were respectively 0.78, 0.027/hr, 1.1/hr and 95mg/l in the aeration-only CMAS process. The value of the aera capacity (F) appeared to be $9.1\;mg/cm^2-day$ and the mean value of the saturation constant $(K_g)$ appeared to be 53.5 mg/l in the REMSMAs process. Also, the substrate removal .ate of the REMSMAS process was higher than that of the normal activated sludge process when this system was operated in steady-state condition. However, the rate was reduced as the critical operating day was approached.