• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.609-615
• /
• 2008

In this study, the design of UV-free reflecting reactor was studied to enhance the cutting fluid life for cutting machine. And also, the stability of cutting fluid with addition of biocide in cutting fluid and without biocide was compared with respect to the cutting fluid concentration, pH changes and microorganisms. Low number of microorganism was observed in the cutting fluid after UV-free reflecting treatment as compare to the cutting fluid which was added biocide and just cutting fluid alone. PH of the cutting fluid after UV-free reflecting treatment was about 9$\sim$8.5 while others were observed considerably low. The oil contents of cutting fluid which was added biocied and pure cutting fluid were almost degraded with the passage of time. However, in case of UV-free reflecting reactor, 4$\sim$3.5 Brix oil contents were observed in the cutting fluid.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.681-688
• /
• 2019

In this study, the characteristics of natural and synthetic adhesives used in woodcraft were evaluated. The pattern of deterioration of wood and adhesives according to changes in temperature and humidity were compared. For materials, one type of anlmal glue, three kinds of polyvinyl acetate adhesives, one type of epoxy adhesive and one type of zelkova wood were selected. Characteristics of physical and chemical characteristics, weather resistance and drying speed assessment were carried out. The adhesion characteristic evaluation showed that the adhesion strength of anlmal glue and one type of polyvinyl acetate adhesive were 6.54 N/㎟ and 7.01 N/㎟, pH meter of anlmal glue and polyvinyl acetate adhesives was pH 7.03 and pH 3.32-3.59 which were range of available as an adhesive. According to the test results of weather resistance, epoxy adhesives had the highest decreasing value in adhesion strength after deterioration. In the reversible test of the adhesive, it was found to be highly reversible in NaOH, a soluble solvent excluding epoxy, but attention is required when using the wood since it may show discoloration during processing.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.3
• /
• pp.194-200
• /
• 2000

The main objective of this study was to characterize physico-chemical properties, sensory property and oxidative stability of safflower seed obtained by various roasting temperature and time. The contents of water soluble solids decreased in the higher roasting temperature and time. Sensory evaluation of safflower seed roasted in various conditions showed significant differences in taste, color, flavor and palatability. The safflower seed roasted at $190^{\circ}C$ for 20min had the best palatability. At the change of Hunter's values, L values were decreased, and a, b and ${\Delta}E$ values were increased in the higher roasting temperature and time. The content of free sugars such as sucrose and raffinose were reduced significantly in higher roasting time of $190^{\circ}C$ and $210^{\circ}C$. During the storage period after roasting treatment, peroxide values (POV) were highly increased after eight months at the all treatment except for $150^{\circ}C$. Therefore, it is inadequate over eight months after roasting treatment.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.77-83
• /
• 1971

In order to find out the decomposing factors of Sumithion in mineral diluents, the physical and chemical properties of the diluents such as talcs, bentonites, diatomaceous earth and other clay minerals was studied in relation to the decomposition rate of Sumithion in dust formulations. The total base, moisture adsorption capacity, pH, specific surface, water contents, active $Fe^{++}$, ignition loss and cation exchange capacity were analysed as the properties of mineral diluents, and these properties were correlated with the stability of Sumithion in dust formulations. And in hope of finding out the main factors among those properties of diluents, the decomposed products of Sumithion in dust formulations prepared with standard Sumithion were separated by the methods of column chromatography and investigated by thin layer chromatography. The following results were otbained; 1. The total base, moisture adsorption capacity, specific surface, water contents, active $Fe^{++}$ and cation exchange capacity of mineral diluents were found to be highly effective on the rate of decomposition of Sumithion in dust formulations. 2. Decomposed products of Sumithion in dust formulations were found to be dimethylphosphorothionate, 3-methyl-4-nitro phenol and its derivatives. And one fraction was not dissolved in n-hexane and ethylether, but was soluble in methylalcohol and ethylalcohol. 3. The moat highly correlated properties of diluents with the decomposition rate of Sumithion in dust were found to be the total base and water contents. 4. In regard to the kind of diluents, it was found that the rate of decomposition of Sumithion in dust formulations was higher in order of bentonite, diatomaceous earth, kaolin and talc.

• Clean Technology
• /
• v.23 no.4
• /
• pp.357-363
• /
• 2017

In this study, the supercritical carbon dioxide ($scCO_2$)/ n-butyl acetate (n-BA) co-solvent system was employed to remove an unexposed negative photoresist (PR) from the surface of a silicon wafer. In addition, the selectivity of the $scCO_2$/n-BA co-solvent system was confirmed for the unexposed and exposed negative PR. Optimum conditions for removal of the unexposed PR were obtained from various conditions such as pressure, temperature and n-BA ratio. The n-BA was highly soluble in $scCO_2$ without cloud point and phase separation in mostly experimental conditions. However, the $scCO_2$/n-BA co-solvent was phase separated at 100 bar, above $80^{\circ}C$. The unexposed and exposed PR was swelled in $scCO_2$ solvent at all experimental conditions. The complete removal of unexposed PR was achieved from the reaction condition of 160 bar, 10 min, $40^{\circ}C$ and 75 wt% n-BA in $scCO_2$, as measured by ellipsometry. The exposed photoresist showed high stability in the $scCO_2$/n-BA co-solvent system, which indicated that the $scCO_2$/n-BA co-solvent system has high selectivity for the PR removal in photo lithograph process. The $scCO_2$/n-BA co-solvent system not only prevent swelling of exposed PR, but also provide efficient and powful performance to removal unexposed PR.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.35-44
• /
• 2006

Recently, encapsulation studies have been tarried out to protect active agents using shell materials such as polymers, lipids, inorganic materials and the other protective materials. We have prepared copolymers of methylmethacrylate (MMA) and trimethoxysilylpropylmethacrylate (TMPMA), and the copolymers as shell materials were used for encapsulating active agents. Poly(MMA-co-TMPMA) spheres were very efficient for encapsulating active agents such as vitamin derivatives (such as retinol, retinyl palmitate, tocopheryl acetate and ascorbyl tetraisopalmitate) and oil soluble licorice extract etc. Mean diameters of poly(MMA-co-TMPMA) core-shell spheres containing active agents varied between about 0.1 to $10{\mu}m$ according to the experimental conditions. The loading amount of encapsulating active agents was 15 to 25% (w/w) and the loading yield was above 90%. The stability of active agents in poly(MMA-co-TMPMA) core-shell spheres prepared with an UV absorbing precursor increased by 25% compared with that of active agents in spheres prepared without an UV absorbing precursor.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.125-130
• /
• 2006

In order to study the storage stability of winter date (Zizyphus jujuba Miller) with functional MA film storage, linear low density polyethylene $(LLDPE,\;30{\mu}m\;and\;60{\mu}m)$ film packaging and non-packaging were compared $30{\mu}m$ LLDPE packaging, $60{\mu}m$ LLDPE packaging and non-packaging samples were stored at $0^{\circ}C,\;8^{\circ}C$ (low temperature) and $25^{\circ}C$(room temperature) for 10 weeks. Weight loss of $30{\mu}m$ LLDPE packaging, $60{\mu}m$ LLDPE packaging and non-packaging in room temperature were decreased by 3.6% 0.4% and 36.1% respectively. Titratable acidity showed the trend of similarity in all treatment during the storage conditions, and especially LLDPE film packaging showed higher than non-packaging in the last storage. Soluble solids showed an increase in non-packaging, a decrease in LDPE film packaging highly. Vitamin C content showed the trend of decrease in all treatments, but non-packed jujubes sustained higher than LLDPE film packaging.

• Journal of Dairy Science and Biotechnology
• /
• v.31 no.1
• /
• pp.9-20
• /
• 2013

The study was conducted to evaluate the feasibility of Mozzarella cheese analogue generation by using a mixture of soy milk and raw milk and to compare the quality of the resultant cheese with that of Mozzarella cheese manufactured using the traditional method. The mixtures showed increase in protein and decrease in lactose and SNF in a dose-dependent manner with the addition of soy milk. The Mozzarella cheese analogue had lower total solids content than the control cheese product, while the fat content was similar between both. The analogue cheese had lower ash content than the traditionally prepared cheese; the content was proportional to the amount of soy milk in the mixture. Higher soy milk quantities within mixtures also resulted in proportionally higher levels of fat content within analogue cheese. Water-soluble nitrogen content was lower in the analogue cheese than in the control cheese. While the WSN level increased in the control cheese, it was almost constant in the analogue cheese. The control cheese had much higher actual and predicted yield than the analogue cheese, while the analogue cheese had a higher stability level. The control cheese had a higher transfer rate than the analogue cheese, with the exception of lactose. Electrophoresis analysis showed bands for Mozzarella cheese analogues that were present in addition to the normal ${\alpha}$-casein and ${\beta}$-casein bands. Physical characteristic analysis showed that hardness was affected by the addition of soy milk to cheese, while cohesiveness and brittleness were affected by the addition of raw milk, and elasticity was barely affected by milk composition. The meltability of the control cheese was higher than that of the analogue cheese and increased during 30 days of storage at $4^{\circ}C$. Browning, oiling-off, and stretching characteristics were almost identical between the 2 types of cheeses. Sensory evaluation findings showed that the control cheese had much better body texture, appearance, and flavor than the analogue cheese.

• Korean Journal of Veterinary Research
• /
• v.31 no.4
• /
• pp.491-500
• /
• 1991

This study was conducted to detect the serum antibodies in the experimentally toxoplasma infected dogs and street dogs by use the of an enzyme-linked immunosorbent assay (ELISA). And this test was performed on the polystylene microplate by coating with the tachyzoites soluble antigen of T gondii (RH strain), incubated with sera diluted then, added with HPO-conjugated rabbit anti-dog IgG and o-phenylenediamine used as a substrate. Tachyzoites of T gondii harvested from mouse peritoneal cavity were purified by 30, 40 and 50% Percoll density gradient centrifugation and used as the source of antigen. The results obtained were summarized as follows; 1. The highest ratio of positive to negative (P/N ratio) was obtained at the level of $l{\mu}g/ml$ protein concentration of antigen with the 1/4000 dilution of the conjugate measured by checker-board titration. It was regarded as the optimum concentration of the antigen and conjugate. 2. Cut-off value in this IgG ELISA was 0.375 that was determined by mean absorbance (at 492nm) of IFA negative serum added with the dauble value of the standard deviation $(mean{\pm}2S.D.)$. 3. Serum ELISA IgG antibodies to T gondii in the exyerimentally infected dogs were detected firstly at the Week 3 after inoculation and the highest titer was recognized at the Week 4, 5 and 6 after inoculation. 4. Stability of the antigen absorbed in the microplates that were preserved at $4^{\circ}C$ and $-25^{\circ}C$ separately were prolonged up to 3 weeks and 10 weeks at $4^{\circ}C$ and $-25^{\circ}C$, respectively. However the reproducibility was not reliable after the preservation of 4 weeks and longer. 5. Positive rate of the specific antibodies in 312 test sera was 28.5% and there was no significant differences between the male (27.8%) and female (29.5%), respectively. 6. The IgG ELISA was proved to be a specific procedure for the detection of antibodies to canine toxoplasma infection and also evaluated as a screening test for the large scale of test samples in laboratory.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.258-263
• /
• 2013

New conducting polymers containing heterocyclic ring with carbazole, EDOT and benzobisthiazole were synthesized and characterized by organic spectroscopic methods. Potentiometric ion-selective membrane electrodes (ISMEs) have been extensively used for ion analysis in clinical, environmental, and industeial fields owing to its wide response range (4 to 7 orders of magnitude), no effect of sample turbidity, fast response time, and ease of miniaturization. Considerable attention has been given to alternative use of room temperature vulcanizing (RTV)-type silicone rubber(SR) owing to its strong adhesion and high thermal durability. Unfortunately, the high membrane resistance of SR-based (ISMs)(2 to 3 higher orders of magnitude compared to those of poly(vinyl chloride)(PVC)-based ones) has significantly restricted its application. Herein we demonstrate a new method to reduce membrane resistance via addition of new conducting polymer into the SR-based ISMs.