• Bulletin of the Korean Chemical Society
• /
• 제22권5호
• /
• pp.451-452
• /
• 2001

• Macromolecular Research
• /
• 제11권3호
• /
• pp.157-162
• /
• 2003

6FDA-based polyimides were prepared from the thermal imidization reaction of 6FDA with diamines of BAPAF, DAP, and DABA having a polar group of hydroxyL or carboxyl. Properties of the dense polyimide membranes were characterized and their gas permeation properties for H$_2$, $CO_2$, $O_2$, $N_2$, and CH$_4$ were investigated. Permeabilities, diffusion coefficients and diffusivity selectivities of polar group-containing polyimide membranes including 6FDA-BAPAF, 6FDA-DAP, and 6FDA-DABA polymer for the gases did not change largely. The separation properties of 6FDA-TrMPD polyimide membrane used as a reference polymer were compared with those of the polyimide membranes mentioned above. It was found that the polyimides of 6FDA-BAPAF, 6FDA-DAP, and 6FDA-DABA, which were soluble in alcohol or/and 2-methoxyethanol, could be applicable to the preparation of a dense composite membrane by dip-coating method.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 추계 총회 및 학술발표회
• /
• pp.39-45
• /
• 1997

Introduction : Polyimides are one of the most important classes of the high performance polymers due to their excellent electrical, thermal, and high-temperature mechanical properties. But their uses are limited because of their poor solubility. Most polyimide derivatives are processed in the form of polyamic acids, which are subsequently converted into the imide structures.Recently, it has been found that the soluble polyimides with large molecular weight sufficient to application. For enhancing processability, the majority of approaches have involved the following factors. As much as, the separation of the imide ring along the back-bone, that is to say, reducing the density of imide ring in the repeat structure. The introduction of bulky substituents along the back-bone, in order to enhance the free volume of main-chain. The incorporation of flexible or thermally stable linkages in the main-chain, reducing the packing force. The disruption of symmetry or recurrence regularity through copolymerization in order to reduce crystallnity.The objectives of this investigation are the synthesis and characterization of soluble polyimides as membrane materials by the single-step polymerization and the preparation of the asymmetric polyimide membrane by using phase inversion technique. In the present study, three series of polyimide derivatives are synthesized; H series is homopolyimides, A series is prepared from single dianhydride and two diamines, B series is yielded from two dianhydrides and a diamine. The dope solution was directly prepared from the PI solution via one step polymerization from monomers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.871-874
• /
• 2007

We have synthesized a novel fully soluble and low-temperature processable polyimide gate insulator (KSPI) through one-step condensation polymerization. For the preparation of KSPI, 5- (2,5-dioxytetrahydrofuryl)-3-methly-3-cyclohexene- 1,2-dicarboxylic anhydride (DOCDA) and 4,4- diaminodiphenylmethane (MDA) were used as monomers and fully imidized KSPI was completely soluble in organic solvents like ${\gamma}-butyrolactone$ and 2-butoxyethanol, etc.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 춘계 총회 및 학술발표회(한국막학회)
• /
• pp.142-145
• /
• 2001

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.25-35
• /
• 2002

The gas permeation properties have been studied on carbon molecular sieve (CMS) membranes prepared by pyrolysis of P84 polyimide under various conditions. P84 polyimide shows high permselectivities (O$_2$/N$_2$= 9.17 and CO$_2$/N$_2$= 35) for various gas pairs and has a good processibility because it is easily soluble in high polar solvents such as N-methylpyrrolidinone (NMP), dimethylformamide (DMF), and N,N-dimethylacetamide (DMAc). After pyrolysis under Ar flow, the change in the heating rate was found to affect the gas permeation properties to some extent. The permeabilities of the selected gases were shown to be in the order He ＞ CO$_2$＞ O$_2$＞ N$_2$for all the CMS membranes, whose order was in accordance with the order of kinetic gas diameters. It also revealed that the pyrolysis temperature considerably influenced the gas permeation properties of the CMS membranes derived from P84 polyimide. The CMS membranes pyrolized at 700$\^{C}$ temperature exhibited the highest permeability with relatively targe loss in permselectivity. This means that the pyrolysis temperature should be varied in accordance with target gases to be separated.

• 공업화학
• /
• 제9권2호
• /
• pp.306-310
• /
• 1998

용해성 PMDA/diamine/dianhydride 폴리이미드를 제조하여 특성을 고찰하고, 상용 알루미나 세라믹막내에 제조한 PMDA/diamine/dianhydride 용액을 코팅하여 기체투과특성을 알아보았다. Tg는 $337{\sim}358^{\circ}C$의 범위로 열적안정성은 우수함을 보였다. 용해성에 있어서는 NMP, DMAc, DMSO, THF, m-cresol의 극성 용매에 대해 대부분 좋은 결과를 보여 주었다. 알루미나막과 용해성 폴리이미드의 점착은 잘 이루어졌으며, 기체투과실험에 있어 6FDA를 포함한 폴리이미드의 경우 높은 투과도를 보였다. PMDA/1,3PDA/6FDA의 경우 질소투과도는 약 $7.6{\times}10^{-7}(mol/m^2{\cdot}Pa{\cdot}s)$의 값을 나타내었고, 질소에 대한 산소의 이상적 분리도, $P(O_2/N_2)$는 6.19였으며, $P(H_2/N_2)$의 경우는 약 70.0의 이상적 분리도를 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1759-1761
• /
• 1999

The generation of pretilt in nematic liquid crystal(NLC)and electro-optical(EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique p-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about $2.5^{\circ}$ with p-polarized UV light irradiation of $20^{\circ}$ on PI-3 surface at 20 min.; However pretilt angle of about $0.5^{\circ}$ are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with p-polarized UV light irradiation of $20^{\circ}$ on PI-1 surfaceat at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau_d$ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.234-237
• /
• 2007

3,4-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4'-nitrostilbene dianhydride was prepared and reacted with 4,4'-(hexafluoroisopropylidene)dianiline to yield a novel Y-type polyimide containing the 3,4-dioxynitrostilbenyl group as an NLO-chromophore, which constituted part of the polymer backbone. The resulting polyimide was soluble in polar solvents such as acetone and N,N-dimethylformamide. The polymer exhibited good thermal stability up to $370^{\circ}C$ in the thermogravimetric analysis. The glass-transition temperature ($T_g$) obtained from the differential scanning calorimetry thermogram was near to $153^{\circ}C$. The second harmonic generation (SHG) coefficient ($d_{33}$) of the poled polymer film at the fundamental wavelength of $1064\;cm^{-1}$ was around $2.15\;{\times}\;10^{-8}\;esu$ (9.01 pm/V). The dipole alignment exhibited exceptionally high thermal stability even at a temperature $30^{\circ}C$ above the $T_g$, and there was no SHG decay below $180^{\circ}C$ because of the partial main chain character of the polymer structure.

• 폴리머
• /
• 제33권3호
• /
• pp.207-212
• /
• 2009

감광성 폴리이미드의 전구체 폴리이미드는 2, 2, 2-트리플루오르에탄 디안하이드라이드의 유도체와 3,3'-디히드록시-4,4'-디아미노비페닐로부터 제조하였다. 감광성 폴리이미드(PI-SP6와 PI-SP12)는 전구체 폴리이미드와 감광성 2-스티릴피리딘알킬렌(헥실렌과 도데실렌)유도체로부터 제조하였다. 합성한 광반응성 폴리이미드는 여러 가지 유기 용매에 잘 녹았다. 감광성 폴리이미드의 초기 열분해온도는 $350^{\circ}C$였다. PI-SP6와 PI-SP12의 유리전이온도는 $130^{\circ}C$와 $85^{\circ}C$였다. 이는 헥실렌기를 가지는 PI-SP6 보다 도데실렌기를 가지는 PI-SP12가 유연하다는 것을 의미한다. 이들 감광성 고분자의 필름은 $250^{\circ}C$에서도 90%의 투과율을 유지하였다. 이 결과는 이들 감광성 폴리이미드가 투명성 및 내열성이 우수한 고분자라는 것을 의미한다. PI-SP6와 PI-SP12는 $1.5\;J/cm^2$ 광량에서 이색비가 각각 0.01과 0.03이었다. 이 결과는 광배향에 유연한 알킬렌 스페이서를 가지는 감광성 폴리이미드가 보다 효과적이라는 것을 뜻한다.