• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.471-475
• /
• 2004

The solubility of N,N'-Bis(salicylidene) ethylenediamine (n-salen) and N,N'-bis(3,5-di-tert-butylsalicylidene) ethylenediamine (t-butyl-salen) was studied with in-situ UV-VIS spectrometer. n-Salen is 3-5 times more soluble than t-butyl-salen in liquid or supercritical $CO_2$. This behavior may be attributed to Lewis acid-base interaction between salen and $CO_2$. The chelation of salen with $Co^{++}$ ion in supercritical condition was confirmed to be fast enough above room temperature. However, the metal ion extraction capability of t-butyl salen is relatively poor because of its low solubility and ionic nature of complex.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2797-2800
• /
• 2010

For the purpose of developing advanced new absorbents for carbon dioxide, ionic liquids (ILs) are considered as alternative materials due to their superior properties to conventional organic solvents. Since low $CO_2$ solubility in ionic liquids is a major concern for their application as absorbents, it is essential to focus on improving $CO_2$ absorbing capability of ILs. In this paper, strongly basic ionic liquids, namely [$C_n$-mim]OPh (n = 2, 4, 6), have been synthesized and studied over a wide range of temperature and pressure changes. [$C_n$-mim]OPh can be easily synthesized from corresponding [$C_n$-mim]Cl and sodium phenoxide and has been found to be good $CO_2$ absorbents.

• Korean Journal of Food Science and Technology
• /
• v.46 no.2
• /
• pp.180-188
• /
• 2014

This study focused on assessing the solubility and structural characteristics of two types of coenzyme $Q_{10}$ ($CoQ_{10}$) complexes: the $CoQ_{10}$-starch and the $CoQ_{10}$-cyclodextrin complexes. The solubility of $CoQ_{10}$-starch complex increased significantly as the temperature was increased. However, the solubility of $CoQ_{10}$-cyclodextrin complex reached a peak at $37^{\circ}C$, and strong aggregation occurred at $50^{\circ}C$. When the temperature was raised to $80^{\circ}C$, the $CoQ_{10}$-cyclodextrin complex dissociated owing to the weakening of bonds, resulting in $CoQ_{10}$ emerging at the surface of water. Therefore, $CoQ_{10}$-cyclodextrin complexes have lower solubility, due to their reduced heat-stability, than do the $CoQ_{10}$-starch complexes. Structural differences between the two $CoQ_{10}$ complexes were confirmed by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffractometer (XRD), and differential scanning calorimeter (DSC). The $CoQ_{10}$-cyclodextrin complex included an isoprenoid chain of $CoQ_{10}$, while the $CoQ_{10}$-starch complex included both the benzoquinone ring and the isoprenoid chain of $CoQ_{10}$. These results suggest that $CoQ_{10}$-starch complexes possess higher heat-stability and solubility than do the $CoQ_{10}$-cyclodextrin complexes.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.1-9
• /
• 2010

Since carbon dioxide, $CO_2$, was revealed as a major greenhouse gas, techniques for its separation, capture, and storage have received increasing interest in recent years. Aqueous amines are the most widely accepted $CO_2$ absorbents, but they cause the problems such as high regeneration energy, thermal degradation, and loss of absorbents due to their volatility. Ionic liquids having high thermal stability, extremely low vapor pressure, and capability of selectively absorbing specific gases have been proposed as new $CO_2$ capturing solvents which may potentially replace aqueous amines. By reviewing the ionic liquids having capability to absorb $CO_2$ reported in previous papers, we seek to develop a comprehensive understanding on the factors that influence the $CO_2$ solubility in ionic liquids such as their structures, absorption temperature, pressure, water content, etc., and to estimate the potential of ionic liquids as $CO_2$ separating media.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.515-522
• /
• 2003

Tritium behavior in the solid breeder blanket is one of the key factors in determining tritium self-sufficiency, as well as safety, of fusion reactors. Recently, a model has been developed to describe the tritium behavior in solid breeder material, which can predict the tritium release and inventory in the blanket. However, the model has limitation to account for tritium solubility effects, mainly existing as LiOT, especially inside the $Li_{2}O$ solid breeder. In order to improve the capability of predicting the LiOT precipitation in $Li_{2}O$ solid breeder, a new logic is developed and integrated in the existing tritium release and inventory calculation code. With the logic developed in this work, the code can have capabilities to analyze tritium release and inventories in $Li_{2}O$ under steady and transient conditions. It can be found that tritium inventory as LiOT is an important mechanism under pulsed operation, and the amount of inventory becomes higher as the tritium generation rate increases and the temperature decreases. Also, the temperature limits for the generation of LiOT precipitation are determined. Therefore the developed logic helps understand the tritium transport mechanism in $Li_{2}O$ solid breeder.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.379-391
• /
• 2022

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC^®, TLC), resin-modified calcium hydroxide cement (Ultra-Blend^TM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA^® premixed regular [EMPR] and Well-Root^TM PT [WRP]). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials' pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.115-116
• /
• 2023

This study aims to investigate and improve the carbon dioxide sequestration capability and the mechanical properties of non-hydraulic low calcium silicate cement especially designed for CO₂ reaction and ordinary Portland cement subjected to the carbonation curing facilitating pH swing method. Nitric acid (HNO₃) was utilized as an liquid for the mixing of cement paste to enhance the initial dissolution of Ca ions from the cements by promoting low pH environment and prevent the direct precipitation of Ca with the anion, owing to the high solubility of Ca(NO₃)₂ in water. The results presented that the higher the concentration of HNO₃, the higher the compressive strength and CO₂ sequestration (until 0.1 M). Ca dissolution caused by the harsh acid attack onto the anhydrous cement particle lead to the higher carbonation reaction degree, forming abundant CaCO₃ crystals after the reaction. However, cement paste mixed with excessively high concentration of HNO₃ presented deterioration due to the too harsh pH environment and abundant NO₃- ions which are known to retard the reaction of cement.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.499-513
• /
• 2020

Among the many studies of carbon-based nanomaterials, carbon-based dots (CDs) have attracted considerable interest owing to their large surface area, intrinsic low-toxicity, excellent biocompatibility, high solubility, and low-cost with environmentally friendly routes, as well as their ability for modification with other nanomaterials. CDs have several applications in biosensing, photocatalysis, bioimaging, and nanomedicine. In addition, the fascinating electrochemical properties of CDs, including high active surface area, excellent electrical conductivity, electrocatalytic activity, high porosity, and adsorption capability, make them potential candidates for electrochemical sensing materials. This paper reviews the recent developments and synthesis of CDs and their composites for the proposed electrochemical sensing platforms. The electrochemical principles and future perspective and challenges of electrochemical biosensors are also discussed based on CDs-nanocomposites.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.55-58
• /
• 2005

Sophorolipid was produced by Candida bombicola ATCC 22214 from soybean dark oil, a byproduct of soybean oil processing. With a fed-batch culture of C. bombicola for 7 days, 90 g/l of sophorolipid was obtained. The CMC (critical micelle concentration) and minimum surface tension of the sophorolipid in aqueous solution were found to be 150 mg/l and 48 mN/m, respectively. The dispersion capability of sophorolipid was higher than that of the chemical surfactants such as SDS and Brij30. The molar solubility ratio (MSR) of 4-methylnaphthalene was 0.2. Linoleic and oleic acids were the main constituents of the fatty acid composition of the sophorolipid. The sophorolipid showed antimicrobial activity against Propionibacterium acne and Bacillus subtilis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.529-529
• /
• 2012

Dispersion of carbon nanotubes in biocompatible media are of particular interest for diverse biomedical and nanomedicine applications. Various biomolecules and biopolymers such as DNA, proteins, poly L-lysine, starch, gelatin, steroid biosurfactants, and chitosan have shown capability for the effective dispersion of carbon nanotubes in water. Chitosan has demonstrated capacity for effective dispersion of single-walled carbon nanotubes (SWCNTs) in acidic medium and it also showed tendency to preferentially disperse smaller diameter nanotubes. Chemical functionalizations of chitosan enable its solubility in neutral pH water by reducing the intra and inter molecular hydrogen bonding. Herein, we present a neutral pH water soluble chitosan derivative, chitosan-hydroxyphenyl acetamide (CHPA), obtained by functionalizing the amino groups of chitosan with 4-hydroxyphenyl acetic acid, as an efficient biocompatible dispersant for debundling and solubilization of SWNTs in neutral aqueous solutions. Various process conditions for individual dispersion of SWCNTs are analyzed based on optical absorption and Raman spectroscopy.