• 한국연초학회지
• /
• 제25권1호
• /
• pp.47-52
• /
• 2003

The purposes of this study were to examine effect by Solid Matrix Priming(SMP) ; method far enhanced rapid and uniform seedling emergence in tobacco seeds. The results were as follows. No enhancement of germination rate was by SMP treatment. In KF114 during 9 days treatment and in KB108 during 7 days treatment, germinative energy was highest, and T50 and mean germination time were the shortest. Cells in embryo and hypocotyl were divided and extended during SMP treatment. The contents of fatty acid were increased in SMP treatment. The changes of glucose content were little.

• 한국토양환경학회지
• /
• 제4권3호
• /
• pp.95-104
• /
• 1999

소수성 오염물질인 원유성분의 분해메카니즘을 규명하기 위하여 원유중 알칸성분의 동시분해능을 지닌 Acinetobacter sp. 를 단리하여 액체/고체알칸, 서로다른 고체알칸을 단일 또는 복합기질로 하여 비교분해연구를 행하였다. 또한 비분해성 유기액상성분인 pristane을 원유매체, 고체알칸인 heneicosane을 유효기질로 하는 실험계를 확립하여 원유성분의 분해모델로서 연구를 행하였다. 본 연구에 이용된 Acinetobacter sp. 는 기질의 물리적 상태가 다른 액체/고체 성분의 분해특성에 차이를 보이지 않고 소수성기질의 표면에 직접접촉하여 분해할수 있음을 시사하였으며, 서로 다른 고체알칸의 단일 또는 복합 분해연구와 탄화수소에 대한 미생물의 부착성 결과가 이를 믿바침하였다. 또한 고체성분이 원유중에서는 유기상내에 용존상태로 존재함에 착안한 heneicosane/pristane계의 연구결과 원유매체는 미생물로의 유효기질 전달을 억제함을 밝혔으며, 단일성분으로 존재할때에 비하여 분해가 일어나기 위한 미생물과의 접촉면적을 감소시키는 유효기질의 비표면적 저하가 주요 원인임을 알 수 있었다.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1619-1629
• /
• 1995

The Al/Al$_{2}$O$_{3}$ SiC and Al/Al$_{2}$O$_{3}$/C hybrid metal matrix composites (MMCs) were fabricated by squeeze infiltration method. Uniform distribution of reinforcements were found in the microstructure of metal matrix composites. Mechanical tests were carried out under various test conditions to clearly identify mechanical behavior of MMCs, and the wear mechanism of Al/Al$_{2}$O$_{3}$/(SiC or C) hybrid metal matrix composites were investigated. The tensile strength and hardness of hybrid composites was resulted in increasing compared with those of the unreinforced matrix alloy. Wear resistance was strongly dependent upon kinds of fiber, volume fraction and sliding speed. The wear resistance of metal matrix composites was remarkably improved by the addition of reinforcements. Especially, the wear resistance of the hybrid composites of carbon fibers was more effective than in the composites reinforced with alumina and SiC whiskers of reinforcements. This was due to the effect of carbon fiber on the solid lubrication. Wear mechanisms of hybrid composites were suggested from wear surface analyses. The major wear mechanism of hybrid composites was the abrasive wear at low to intermediate sliding speed, and the melting wear at intermediate to high sliding speed.

• 분석과학
• /
• 제8권4호
• /
• pp.623-630
• /
• 1995

Silicone rubber-based sodium-selective membranes are developed for solid-state ion sensors. It was shown that the potetiometric performance of SR-based membranes are greatly dependent on the type of neutral carriers employed; among the three ionophores, N,N,N',N'-tetracyclohexyl-1,2-phenylenedioxydiacetamide (ETH 2120), bis[(12-crown-4)methyl]dodecylmethylmalonate (D12C4DMM) and monensin methyl ester (MME), examined, only ETH 2120 was compatible with the SR-based matrix. Addition of about 20 wt% plasticizer to the SR-based matrix provided the resulting membranes with potentiometric properties essentially equivalent to those of the corresponding PVC-based membranes. Owing to the strong adhesive strength of SR-based membranes, the CWEs coated \vith those membranes exhibited long lifetime with conventional electrode-like performance. Blending of PU into the SR matrix increased the lifetime of CWEs from two weeks to one month.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.76-79
• /
• 2009

In Joule-heating-induced crystallization, solid-to-solid or liquid-to-solid phase transformation could occur. It was found that novel physical phenomena that randomly nucleated liquid seeds, followed by rapid solidification in an amorphous matrix, during the Joule-heating-up period play an important role especially in liquid-to-solid transformation. Under some processing conditions, super-grains sized 6-8 ${\um}m$ were produced by the lateral growth from the initial seeds, without any artificially control.

• 대한화장품학회지
• /
• 제31권2호
• /
• pp.135-140
• /
• 2005

본 연구는 고형상 에멀젼의 표면에서 일어나는 물리적 특성을 레올로지를 이용해 관찰해 보았다. 고형상 에멀젼이 전단변형에 따라 고상에서 액상으로의 전이시 전단속도가 큰 고형상 에멀젼의 경우 낮은 전단변형과 높은 전단변형에서 두 번의 전이구간을 보여주는 반면에 전단속도가 작은 고형상 에멀젼의 경우 높은 전단변형에서 전이구간이 한 번만 나타내는 것을 볼 수 있었다. 이는 고형상 에멀젼의 전단변형에 따른 표면의 물리적 특성이 중요한 요소로서 고형상 에멀젼의 구성요소에 따라 변화하게 된다. 유상과 수상으로 구성되어진 고형상 에멀젼에서 수상의 함량이 증가하게 되면 표면전이(surface transition) 구간이 점점줄어들다가 사라지는 것을 볼 수 있었으며, 유상과 분체로 구성되어진 고형상 에멀젼에서는 분체의 함량이 증가함에 따라 표면전이 구간이 점점 증가하는 것을 볼 수 있었다. 그리고 유상, 수상 그리고 분체로 이루어진 고형상 에멀젼에서는 분체의 함량이 증가함에 따라 표면전이 구간이 점점 줄어들다가 사라지는 것을 볼 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2801-2808
• /
• 2022

The synergistic effect of ZrC nanoparticle pining and Re solution in W matrix on the thermal stability of tungsten was studied by investigating the evolution of the microstructure, hardness and tensile properties after annealing in a temperature range of 1000-1700 ℃. The results of metallography, electron backscatter diffraction pattern and Vickers micro-hardness indicate that the rolled W-1wt%Re-0.5 wt% ZrC alloy has a higher recrystallization temperature (1600 ℃-1700 ℃) than that of the rolled pure W (1200 ℃), W-0.5 wt%ZrC (1300 ℃), W-0.5 wt%HfC (1400-1500 ℃) and W-K-3wt%Re alloy fabricated by the same technology. The molecular dynamics simulation results indicated that solution Re atoms in W matrix can slow down the self-diffusion of W atoms and form dragging effect to delay the growth of W grain, moreover, the diffusion coefficient decrease with increasing Re content. In addition, the ZrC nanoparticles can pin the grain boundaries and dislocations effectively, preventing the recrystallization. Therefore, synergistic effect of solid solution Re element and dispersed ZrC nanoparticles significantly increase recrystallization temperature.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.253-255
• /
• 2012

This study has numerically investigated the combustion processes in the bilayer porous media. To account for the velocity transition and diffusion influenced by solid matrix, porosity effects are included in the governing equations. Heat transfer coefficient is calculated by Nusselt number to reflect the effect of gas velocity, pore diameter, and material properties. Numerical results indicate that the present approach is capable of the essential features of the premixed combustion in the porous burner, in terms of the precised flame structure, pollutant formation, and flame stabilization. It is also found that heat transferred from the downstream flame zone is conducted to the upstream flame region through the solid matrix and the preheated mixture. By increasing the inlet velocity, the solid temperature of upstream is cooling down.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.443-447
• /
• 1994

Compacts of mixed SiO2-Si powder were liquid phase sintered at 145$0^{\circ}C$ for up to 60 min in a hydrogen atmosphere. In contrast to the conventional microstructures of liquid phase sintered materials, the specimens showed that the solid phase of SiO2 formed a matrix while the liquid phase of Si was the dispersed in the solid matrix. The dispersion of liquid Si pockets was attributed to the high wetting angle of liquid Si on solid SiO2. Because of relatively high solubility of SiO2 in liquid Si at 145$0^{\circ}C$, SiO2 particles accommodated their shape via a solution-reprecipitation process. The liquid Si pockets grew by coalescing with their neighbour pockets. In the latter stage of the sintering, plate-shape grains appeared in the liquid Si pockets. The grains were SiO2 phase precipitated from the liquid Si which was oversaturated with oxygen during cooling to room temperature. By the formation and subsequent removal of the gaseous SiO phase due to the reaction between SiO2 and Si, the specimens became porous.

• 대한수의학회지
• /
• 제37권1호
• /
• pp.195-202
• /
• 1997

A method for the isolation by matrix solid phase dispersion method and liquid chromatographic determination of enrofloxacin and ciprofloxacin in pork muscle tissue is presented. Blank or enrofloxacin and ciprofloxacin spiked samples(0.5g) containing 0.05g oxalic acid were blended with $C_{18}$(octadecylsilyl derivatized silica) packing material. After homogenization, $C_{18}$/muscle tissue matrix was transferred to glass column made from 10ml glass syringe and filter paper, and compressed to 4~4.5ml volume. A column was washed with 8ml of hexane and dried under vacuum. Interfering materials were removed by ethylacetate 8ml and dried, following which enrofloxacin and ciprofloxacin were eluted with 8ml of methanal under gravity. The eluate containing enrofloxacin and ciprofloxacin wase free from interfering compound when analysed by HPLC with UV detection at 278nm. Enrofloxacin and ciprofloxacin showed linear response with UV detector at the range of $0.05{\sim}1.0{\mu}g/ml$ and eluted within 5ml elution volume of methanol from the matrix. Fortified sample containing 0.05g oxalic acid represented more good recoveries than that of control sample. Average percentages of enrofloxacin and ciprofloxacin were $93.30{\pm}4.56%$ and $91.84{\pm}4.17%$, respectively, for the concentration range(0.05, 0.1, 0.25, 0.5 and $0.75{\mu}g/g$). The interassay variability of enrofloxacin was $6.02{\pm}5.33%$ with an intra-assay variability of 4.89% and $6.75{\pm}2.68%$ with 4.54% for ciprofloxacin. Detection limit of enrofloxacin and ciprofloxacin was $0.030{\mu}g/g$ in the spiked sample.