• Title/Summary/Keyword: solid medium

Search Result 726, Processing Time 0.029 seconds

Development of Solid Self-nanoemulsifying Drug Delivery Systems of Ticagrelor Using Porous Carriers (다공성의 캐리어를 이용한 티카그렐러 함유 고형의 자가 나노유화 약물전달시스템 개발)

  • Choi, Hyung Joo;Kim, Kyeong Soo
    • Journal of Life Science
    • /
    • v.31 no.5
    • /
    • pp.502-510
    • /
    • 2021
  • The objective of this study was to develop a novel ticagrelor-loaded self-nanoemulsifying drug delivery system with an enhanced solubility and dissolution rate. Numerous oils and surfactants were screened, then medium chain triglyceride (MCT) oil and the surfactants polyoxyethylene sorbitan monooleate (Tween 80) and Labrafil M1944CS were selected for the preparation of the ticagrelor-loaded self-nanoemulsifying drug delivery system. A pseudo-ternary phase diagram was constructed to detect the nanoemulsion region. Of the various formulations tested, the liquid SNEDDS, composed of MCT (oil), Tween 80 (surfactant), and Labrafil M1944CS (cosurfactant) at a weight ratio of 20/70/10 produced the smallest emulsion droplet size (around 20.56±0.70 nm). Then, particle size, polydispersity, and zeta potential were measured using drugs containing liquid SNEDDS. The selected ticagrelor-loaded liquid SNEDDS was spray-dried to convert it into a ticagrelor-loaded solid SNEDDS with a suitable inert carrier, such as silicon dioxide, calcium silicate, or magnesium aluminometasilicate. The solid SNEDDS was characterized by scanning electron microscopy, transmission electron microscopy, and in vitro dissolution studies. SEM, PXRD, and DSC results suggested that amorphous ticagrelor was present in the solid SNEDDS. Also, the solid SNEDDS significantly increased the dissolution rate of ticagrelor. In particular, the emulsion particle size and the polydispersity index of the solid SNEDDS using silicon dioxide (SS1) as a carrier was the smallest among the evaluated solid SNEDDS, and the flowability and compressibility result of the SS1 was the most suitable for the manufacturing of solid dosage forms. Therefore, solid SNEDDS using silicon dioxide (SS1) could be a potential nano-sized drug delivery system for the poorly water-soluble drug ticagrelor.

Determination of elastic parameters of the deformable solid bodies with respect to the Earth model

  • Guliyev, Hatam H.;Javanshir, Rashid J.;Hasanova, Gular H.
    • Geomechanics and Engineering
    • /
    • v.15 no.5
    • /
    • pp.1071-1080
    • /
    • 2018
  • The study of behavior and values of deformations in the geological medium makes the scientific basis of the methodology of synthesis of true values of parameters of its physico-mechanical and density properties taking into account the influence of geodynamic impacts. The segments of continuous variation of homogeneous elastic uniform deformations are determined under overall compression of the medium. The limits of these segments are defined according to the criteria of instability (on geometric form changes and on "internal" instability). Analytical formulae are obtained to calculate current and limiting (critical) values of deformations within the framework of various variants of small and large initial deformations of the non-classically linearized approach of non-linear elastodynamics. The distribution of deformation becomes non-uniform in the medium while the limiting values of deformations are achieved. The proposed analytical formulae are applicable only within homogeneous distribution of deformations. Numerical experiments are carried out for various elastic potentials. It is found that various forms of instability can precede phase transitions and destruction. The influence of these deformation phenomena should be removed while the physico-mechanical and density parameters of the deformed media are determined. In particular, it is necessary to use the formulae proposed in this paper for this purpose.

Proteases and Protease Inhibitors Produced in Streptomycetes and Their Roles in Morphological Differentiation

  • KIM DAE WI;KANG SUNG GYUN;KIM IN SEOP;LEE BYONG KYU;RHO YONG TAIK;LEE KYE JOON
    • Journal of Microbiology and Biotechnology
    • /
    • v.16 no.1
    • /
    • pp.5-14
    • /
    • 2006
  • Streptomycetes are Gram-positive microorganisms producing secondary metabolites through unique physiological differentiation [4]. The microbes show unusual morphological differentiation to form substrate mycelia, aerial mycelia, and arthrospores on solid medium [19]. Substrate mycelium growth is sustaining with sufficient nutrients in the culture medium. The concentration of a specific individual substrate in the culture environment is the most important extracellular factor allowing vegetative mycelia growth, where extracellular hydrolytic enzymes participate in the utilization of waterinsoluble substrates. However, with starvation of nutrients in the culture medium, the vegetative mycelia differentiate to aerial mycelia and spores. It has been considered that shiftdown of essential nutrients for mycelia growth is the most important factor triggering morphological and physiological differentiation in Streptomyces spp. Since proteineous macromolecule compounds are the major cellular components, these are faced to endogenously metabolize following a severe depletion of nitrogen source in culture nutrients (Fig. 1). Various proteases were identified of which production was specifically related with the phase of mycelium growth and also morphological differentiation. The involvement of proteases and protease inhibitor is reviewed as a factor explaining the mycelium differentiation in Streptomyces spp.

A Study on the Plan of Research Color Code for Color Management in Fashion Industry (패션산업의 색채관리를 위한 조사용 컬러코드의 설계연구)

  • Lee, Kyung-Hee
    • Fashion & Textile Research Journal
    • /
    • v.6 no.3
    • /
    • pp.285-296
    • /
    • 2004
  • Fashion business must reflect the seasonable fashion trend because fashion has change always, and therefore fashion business has a big risk at the attribute. Careful consideration should be given to the selection of a particular color code to meet the purpose of marketing research in various color products. It must be designed to grasp systematically and comprehensively the current trend of colors. The most suitable color code for meeting this proposition would be one based on the designation by color ranges. The ISCC-NBS method of designating colors, published in 1955, was established by dividing the color solid into 267 color name blocks. The detailed classification like the ISCC-NBS system is very appropriate to serve the purpose of giving all color names according to color ranges. But it is somewhat too complicated to answer the purpose of surveying the trend of colors and of comparing and evaluating the ups and downs in the popularity of the range of each individual color. I have worked out the most convenient method of designating colors in accordance with the type of investigation needed. It is the classification which involves four classification system in itself, fundamental, gross, medium, and minute. The fundamental classification system classifies hues and neutrals into 16ranges. The gross classification system divides the above 16 ranges into 30. The medium classification divides the above 30 ranges into 103 in terms of tones. The minute classification divides the above 103 ranges into 207 in terms of specipic hues.

Selection of Protoplasts-Derived Cell Lines for High Yields Indole Alkaloids from Suspension Cultures of Vinca (Catharanthus roseus) (일일초(Catharanthus roseus) 현탁배양으로부터 원형질체유래 Indole Alkaloid 고생산성 세포주 선발)

  • 김석원;정경희
    • KSBB Journal
    • /
    • v.6 no.1
    • /
    • pp.1-7
    • /
    • 1991
  • To produce economically important indole alkaloids by cell cultures, we selected protoplastsderived clones (protoclones) of vinca (Catharanthus roseus) for high yields of catharanthine and ajmalicine. Protoplasts were enzymatically isolated from suspension-cultured cells. The highest plating efficiency (1%) was obtained when protoplasts were plated at a density of 1$\times$105 protoplasts/ml in a culture medium solidified with 0.4% Seaplaque agarose. The growth rates of 40 protoclones subcultured on a solid medium varied over a wide range. Protoclone VPC-6, which had the highest growth rate, was observed to produce relatively high yields of catharanthine and ajmalicine when cultured in a liquid medium. Although the original cell line did not produce catharanthine at a detectable level by HPLC, protoclone VPC-10 produced it at a level of 5.9$\mu\textrm{g}$/g fresh weight of cells for 10 days of culture. Under the same conditions, protoclone VPC-15 produced ajmalicine at a level of 133.6$\mu\textrm{g}$/g, of which productivity was improved about ,3 times than that of the original cell line. The results indicate that differences in the growth rate and indole alkaloid yield among the protoclones reflect the somaclonal variation in suspnsion-cultured cells.

  • PDF

High-frequency Plant Regeneration from Cultured Flower Bud Receptacles of Allium hookeri L.

  • Koo, Ja Choon
    • Horticultural Science & Technology
    • /
    • v.32 no.5
    • /
    • pp.694-701
    • /
    • 2014
  • Allium hookeri L. (Alliaceae family) is an important ethnomedicinal plant native to the Himalayan region of Asia. The aim of this research was to establish a high-frequency plant regeneration system for in vitro propagation of A. hookeri. Among the tissue types examined, receptacle explants derived from immature flower buds showed the highest regeneration rate of shoots ($93.33{\pm}4.63%$), roots ($76.67{\pm}7.85%$), and calli ($80.00{\pm}7.43%$) when cultured on Gamborg B5 (B5) medium containing $10{\mu}M$ 6-benzylaminopurine (BA) + $1{\mu}M$ naphthalene acetic acid (NAA), $0.5{\mu}M$ BA + $5{\mu}M$ NAA, and $1{\mu}M$ BA + $10{\mu}M$ NAA, respectively. Shoot multiplication was superior when cultured in liquid rather than on solid medium and relatively high concentrations of BA, ranging from 5 to $10{\mu}M$. Efficient bulblet formation following root induction from shoot clumps was achieved with culture in liquid B5 medium containing 7% (w/v) sucrose. Regenerated bulblets were successfully acclimatized to ex vitro conditions with a greater than 95% survival rate. By this method, a maximum of 62 plantlets per receptacle could be propagated within 9 weeks of initial culture. The in vitro propagation system established in this study will promote A. hookeri biotechnology, including large-scale production of healthy and aseptic clones, preserving parental genotypes with desirable traits, and genetic manipulation to enhance medicinal value.

Production and Characterization of Fibrinolytic Enzyme: Optimal Condition for Production of the Enzyme from Bacillus sp. KP-6408 Isolated from Chungkook-jang (새로운 혈전용해 효소의 생성 및 특성: 청국장에서 분리한 Bacillus sp. KP-6408로부터 효소 생성의 최적조건)

  • 박인식;길지은;김기남
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.27 no.1
    • /
    • pp.51-56
    • /
    • 1998
  • A bacteium, KP-6408, capable of hydrolyzing fibrin was isolated from Chungkook-jang, which was possibly identified as a strain of Bacillus sp. The effects of culture condition and medium composition on the enzyme production were investigated. Among nitrogen sources tested, yeast extract was the most effective for the enzyme production, and the level of the concentration for the optimal enzyme production was 0.2%(w/v). For carbon sources, glucose was the best for the enzyme production with the level of 2.0%(w/v). The enzyme was maximally produced by cultivating the enzyme production with the level of 2.0%(w/v). The enzyme was maximally produced by cultivating the organism at the liquid medium of the initial pH 8.0 and temperature of 4$0^{\circ}C$. In Chungkook-jang fermentation, the enzyme was maximally produced when incubated at 35$^{\circ}C$ for 24 hrs using soybean as a solid medium. The addition of various rice starch to the soybean in Chungkook-jang fermentation lowered the enzyme production.

  • PDF

Plant Regeneration through Organogenesis from Callus of Camptotheca acuminata Decaisne (희수나무 캘러스로부터 기관분화에 의한 식물체 재분화)

  • Bae, Dae-Ho;Park, Whoa-Shig;Hwang, Sung-Jin;Hwang, Baik
    • Korean Journal of Medicinal Crop Science
    • /
    • v.17 no.3
    • /
    • pp.192-197
    • /
    • 2009
  • Camptotheca acuminata, a native of South China is a well known natural source of monoterpene-indole alkaloid camptothecin(CPT), one of the most promising anti-tumoural compounds. This study was conducted to optimize plant growth regulators and culture conditions on plantlets regeneration through organogenesis from callus of Camptotheca acuminta. Callus were induced from various explants of in vitro germinated plantlets of C. acuminta using WPM medium containing 0.2 ㎎/L 2,4-D. Hypocotyl segments were exhibited higher embryogenic callus than the other explants. Shoot buds formation from embryogenic callus was affected by plant growth regulators, pre-treated dark condition and liquid culture. Organogenesis was optimal in WPM liquid medium containing 0.5 ㎎/L BA. The dark pre-treatment for 2 weeks before the solid culture was effective for organogenesis. The regenerated shoots were rooted in WPM medium with 0.2 ㎎/L NAA and successfully acclimated in green-house conditions.

Attraction of the Invasive Hornet, Vespa velutina nigrithorax, by using Bacillus sp. BV-1 Cultures

  • Lim, Da Jung;Lee, Jeong Eun;Lee, Jin Sil;Kim, Iksoo;Kim, In Seon
    • Korean Journal of Environmental Agriculture
    • /
    • v.38 no.2
    • /
    • pp.104-109
    • /
    • 2019
  • BACKGROUND: The invasive hornet Vespa velutina nigrithorax has becomes a public concern in rural and urban South Korea. The technologies are necessary to develop a way to counter V. velutina. In an effort to develop a way to counter V. velutina, we found that a bacillus strain, named Bacillus sp. BV-1, produces volatile compounds that attract V. velutina. METHODS AND RESULTS: Field trials of V. velutina attraction were performed using plates and traps containing BV-1 cultures grown on sugar medium. When the sugar medium and sugar-grown BV-1 cultures in the plates were placed close together, V. velutina visited preferably the plates with the BV-1 cultures. Significantly more V. velutina were caught in the traps containing BV-1 cultures than in those containing only sugar medium. Headspace solid-phase microextraction coupled with GC/MS analysis of BV-1 cultures detected 2-methyl-1-propanol, 3-methyl-1-butanol, 3-methylbutanoic acid, ethyl hexanoate, 2-pheylethanol, ethyl octanoate, and ethyl decanoate as the major volatiles. CONCLUSION: BV-1 cultures were suggested as potential agents for managing V. velutina as they produce volatile compounds that attract the hornet.

Transmission/reflection phenomena of waves at the interface of two half-space mediums with nonlocal theory

  • Adnan, Jahangir;Abdul, Waheed;Ying, Guo
    • Structural Engineering and Mechanics
    • /
    • v.85 no.3
    • /
    • pp.305-314
    • /
    • 2023
  • The article is about the theoretical analysis of the transmission and reflection of elastic waves through the interface of perfectly connected materials. The solid continuum mediums considered are piezoelectric semiconductors and transversely isotropic in nature. The connection among the mediums is considered in such a way that it holds the continuity property of field variables at the interface. The concept of strain and stress introduced by non-local theory is also being involved to make the study more applicable It is found that, the incident wave results in the generation of four reflected and three transmitted waves including the thermal and elastic waves. The thermal waves generated in the medium are encountered by using the concept of three phase lag heat model along with fractional ordered time thermoelasticity. The results obtained are calculated graphically for a ZnO material with piezoelectric semiconductor properties for medium M1 and CdSc material with transversely isotropic elastic properties for medium M2. The influence of fractional order parameter, non-local parameter, and steady carrier density parameter on the amplitude ratios of reflected and refraction waves are studied graphically by MATLAB.