• 한국식품저장유통학회지
• /
• 제2권2호
• /
• pp.259-268
• /
• 1995

Physico-chemical components which are closely related to processed products were investigated on 10 varieties of Cheju citrus fruits. Juice ratio of Hungjin was the highest, 49.2%, while Sankyool was the lowest, 4.2%, which showed great differences among varieties. Peel ratio of Dangyooja was the highest, 46.1%, while both Navel orange and Hungjin were relatively low. Soluble solid($^{\circ}$Brix) was relatively high In Sankyool, Meiwa Kumquat, Sambokam and Iyo. Acid content was the highest, 4.86% in sudachi and relatively high in Sankyool, Natsudaidai and Dangyooja. The $^{\circ}$Brix to acid content ratio was 13.9 in Meiwa Kumquat and more than 10 in Navel orange and Hungjin. Total sugar contents of Juice were 2.78∼10.94%, while reduced sugar contents were 1.63∼6.38% which showed higher in Meiwa Kumquat, Iyo and Navel Orange. Hesperidin and naringin, the sources of biiter taste and cloudness were low in Hungjin and Iyo. Soluble solid($^{\circ}$Brix) of citrus juice showed highest statistical relationship(r=0.907) with total sugar, and was highly significant at 1% level.

• 한국자기공명학회논문지
• /
• 제7권2호
• /
• pp.68-73
• /
• 2003

Proton magic angle spinning spectra and thermogravimetric analysis data of poly(vinyl butylal) with water in it indicate water contents in the poly(vinyl butylal) samples were reduced during magic angle spinning. Our observation implies that the centrifugal force on the samples due to magic angle spinning cannot be neglected, especially on inhomogeneous and soft samples like poly(vinyl butylal) we tested in this work.

• 한국연초학회지
• /
• 제25권1호
• /
• pp.47-52
• /
• 2003

The purposes of this study were to examine effect by Solid Matrix Priming(SMP) ; method far enhanced rapid and uniform seedling emergence in tobacco seeds. The results were as follows. No enhancement of germination rate was by SMP treatment. In KF114 during 9 days treatment and in KB108 during 7 days treatment, germinative energy was highest, and T50 and mean germination time were the shortest. Cells in embryo and hypocotyl were divided and extended during SMP treatment. The contents of fatty acid were increased in SMP treatment. The changes of glucose content were little.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.11-21
• /
• 2022

전고체 배터리는 차세대 배터리의 유력 후보 중 하나로 특히 미래 전기차 산업을 이끌 핵심 부품으로 주목받고 있다. 본 연구에서는 글로벌 소셜미디어인 레딧(Reddit)의 전고체 배터리 관련 댓글 10,280건을 분석하여 전고체 배터리와 관련된 정책 이슈 및 대중의 관심사를 파악한다. 수집된 글로벌 데이터에 빈도분석, 연관규칙분석, 토픽모델링 등 텍스트마이닝 기법과 감성분석을 적용하여 세계적 동향을 읽고, 이를 우리 정부의 전고체 배터리 발전전략과 비교 및 관련 국가R&D의 정책적 방향을 제시하고자 한다. 분석 결과, 2016년부터 2021년까지의 전고체 배터리 이슈에 대한 전반적인 감성은 긍정이 50.5%, 부정이 39.5%로 긍정인 것으로 나타났다. 또한 세부 감성을 분석한 결과, 대중들은 전고체 배터리에 대해 신뢰와 기대를 가지고 있음과 동시에 해결되지 않은 기술적 문제들에 대한 두려움과 우려의 감정이 공존함을 알 수 있었다. 본 연구에서는 전고체 배터리와 관련된 핵심 이슈 도출을 위한 텍스트마이닝 분석 방법을 적용하였고, 정부 정책 분석을 바탕으로 한 하향식 접근방법과 대중의 인식을 분석하는 상향식 접근방법을 수용하여, 보다 포괄적인 동향 분석 방법을 제시하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2001년도 동계 학술대회 논문집
• /
• pp.359-364
• /
• 2001

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.457-463
• /
• 2000

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1998년도 동계 학술대회 논문집
• /
• pp.362-367
• /
• 1998

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.116-122
• /
• 2005

Room temperature cure type of acryl-urethane coatings with high solid content were prepared in this study. Acrylic resins with 80% solid content were cured with hexamethylene diisocyanate (Desmodure N-3600). The cure time of prepared coatings BEHCC-84 (BEHC-84 : $T_g=0^{\circ}C$) and BEHCC-87 (BEHC-87 : $T_g=30^{\circ}C$), measured by rigid-body pendulum method, was recorded 8.3 hours and 3.8 hours, respectively. Dynamic viscoelastic experiment also revealed the glass transition temperature of BEHCC-84 and BEHCC-87 to be $T_g=40.3^{\circ}C$ and $T_g=43.3^{\circ}C$, respectively. It was found that the adhesion and flexural properties among various propeties of coatings were enhanced by the incorporation of caprolactone acrylate monomer into the acrylic resins.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.256-265
• /
• 1997

The objectives of this study were to examine the ability to predict soluble solid and firmness in intact apples based on the visible/near-infrared spectroscopic technique. Two cultivars of apples, Delicious and Gala, were handled, tested and analyzed separately. Reflectance spectra, Magness-Tayor (MT) firmness, and soluble solids in apples were measured sequentially. Maximum and minimum diameters, height, and weight of apples were recorded before the MT firmness tests. A spectrophotometer was used to collect reflectance spectra of intact apples over a wavelength range of 400 to 2, 498 nm. The W firmness tests were conducted using a standard 11.1mm (7/16 in.) MT probe mounted in an Instron universal testing machine. A digital refractormeter was used to measure soluble solid contents in the apples. Apple samples were divided into a calibration set and a prediction set. The calibration set was used during model development, and the prediction set was used to predict soluble solids and firmness from unknown spectra. The method of partial least square (PLS) analysis was used. An unique set of PLS loading vectors (factors) was developed for soluble solid content and firmness. The PLS model showed good correlations between predicted and measured soluble solids of intact apples in 860～1078 nm of the wavelengths. However, the PLS analysis was not good enough to predict the apple firmness.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.337-343
• /
• 2018

The influence of solid loading in the slurry composition on the morphology of 3Y-TZP granules fabricated by two-fluid spray drying was investigated for solid contents varying between 30 wt% and 50 wt%. The resulting 3Y-TZP granules showed a sphere-like shape with diameters of $40-70{\mu}m$. However, a donut-like shape and a few cracks were observed on the granule surfaces fabricated using the slurry with 50 wt% solid content. The green density after cold isostatic pressing at 200 MPa was $2.1-2.2g/cm^3$, and a homogeneous fracture surface was obtained by complete destruction of granules. After sintering at $1500^{\circ}C$ for 2 h, all specimens had relative densities of 96.2 - 98.3%. With increasing solid content, the relative density decreased from 98.3% to 96.2%, but the grain size increased from $0.3{\mu}m$ to $0.6{\mu}m$. Highly sinterable zirconia granule powder could be obtained by controlling the slurry composition.