• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.987-992
• /
• 1998

Solar cell has an optimum operating point to extract maximum power. To control operating point of the solar cell, a fuzzy controller has already been proposed by our research group. However, several parameters are determined by trial and error. To overcome this problem, this paper adopts Fuzzy Neural Network (FNN) for maximum power point tracking control for photovoltaic array. The FNN can be trained to perfect fuzzy rules and to find an optimum membership functions on-line.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.65-69
• /
• 2017

This paper presents a Technology-CAD (TCAD) simulation of the characteristics of crystalline Si pillar array solar cells. The junction depth and the surface concentration of the solar cells were optimized to obtain the targeted sheet resistance of the emitter region. The diffusion model was determined by calibrating the emitter doping profile of the microscale silicon pillars. The dimension parameters determining the pillar shape, such as width, height, and spacing were varied within a simulation window from ${\sim}2{\mu}m$ to $5{\mu}m$. The simulation showed that increasing pillar width (or diameter) and spacing resulted in the decrease of current density due to surface area loss, light trapping loss, and high reflectance. Although increasing pillar height might improve the chances of light trapping, the recombination loss due to the increase in the carrier's transfer length canceled out the positive effect to the photo-generation component of the current. The silicon pillars were experimentally formed by photoresist patterning and electroless etching. The laboratory results of a fabricated Si pillar solar cell showed the efficiency and the fill factor to be close to the simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.53-57
• /
• 2002

The solar energy is purity and infinity. Solar power converter were used to convert the electrical energy from the solar arrays to a stable and reliable power source. So many countries research this solar energy system The photovoltaic system is construct many solar cell array. In this paper, new implementation solar system was showed buck converter that V-I curve produced. This system can be used to study the short-term and long-term performances of solar cell and efficiency. This system is a far more cost effective and reliable replacement for field and outdoor flight testing. Study of buck converter, analysis and control series or parallels connection characteristics of solar cell way.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.507-517
• /
• 2010

대한항공 기술연구원은 한국과학기술원 인공위성연구센터의 과학기술위성 2호 태양전지 배열기 비행모델을 순수 국내기술로 개발하고, 그 성능을 발사환경시험, 궤도환경시험 그리고 모사 태양광 조사 시험을 통해 검증하였다. 개발된 태양전지 배열기가 탑재된 과학기술위성 2호는 국내 최초의 소형위성 발사체인 KSLV-I에 탑재되어 2010년 5월 나로우주센터에서 발사될 예정이며, 발사 후 위성 운용 데이터를 통해 저궤도에서의 개발된 국산 태양전지 배열기의 우주 인증을 수행할 예정이다. 본 연구에서는 과학기술위성 2호 태양전지 배열기의 전력 성능에 영향을 미치는 요소들을 태양전지 등가모델에 적용하여 태양전지 배열기의 전력 특성을 나타내는 전류-전압 곡선을 도출하고, 이를 모사 태양광 조사를 통한 성능 시험 결과와 비교함으로써 태양전지 등가 모델 및 전력 성능 시뮬레이션의 적합성을 검증하였다. 본 논문의 태양전지 배열기 등가 모델 및 전력 성능 시뮬레이션은 과학기술위성 2호의 관제 운용에 있어, 전 임무기간 동안 생성 전력용량에 따른 최적의 부하운용에 사용될 수 있을 것으로 예상된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.432-441
• /
• 2016

Solar energy is the ideal power choice for long-endurance stratospheric airships. The output performance of solar array on stratospheric airship is affected by several major factors: flying latitude, flight date, airship's attitude and the temperature of solar cell, but the research on the effect of these factors on output performance is rare. This paper establishes a new simplified analytical model with thermal effects to analyze the output performance of the solar array. This model consisting of the geometric model of stratospheric airship, solar radiation model and incident solar radiation model is developed using MATLAB computer program. Based on this model, the effects of the major factors on the output performance of the solar array are investigated expediently and easily. In the course of the research, the output power of solar array is calculated for five airship's latitudes of $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, four special dates and different attitudes of five pitch angles and four yaw angles. The effect of these factors on output performance is discussed in detail. The results are helpful for solving the energy problem of the long endurance airship and planning the airline.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.32-39
• /
• 2011

This study is about the installation of the solar cell modules. The solar cell modules are built by the tree-mimic structure, and the performance is compared with that of the flat-plate type solar cell module installation. The mathematical tree model, which was suggested by Fisher and Honda, is utilized to determine the location of the solar cell modules for the tree-mimic type. The experiment shows that the generated electric power of the flat-plate type is higher than that of the tree-mimic type by 30% for one month of July. This lower performance for the tree-mimic type comes from the shading effects among the solar cell modules. The theoretical calculation for the absorbed solar radiation on the two types of solar cell installation shows that the tree-mimic type is higher than the flat-plate type by 8.5%. The shading area for the tree-mimic model is calculated with time by using the 3D-CAD, which will be utilized for the optimization of the tree-mimic model in the future.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.62-67
• /
• 2003

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm. because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. Output dynamic characteristic of PV array is varied by irradiation and PWM converter performance is studied using PSIM simulator.

• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.1057-1064
• /
• 2014

정지궤도위성은 다수의 탑재체를 하나의 위성체 플랫폼에 탑재하고 2010년 6월 26일에 발사되었다. 태양기간 동안 인공위성에서 요구되는 전력은 태양전지 배열기 윙에서 생성된다. 태양전지는 Spectrolab사의 적층법을 사용한 RWE Space사의 Gaget 2로 명명되는 GaInP/GaAs/Ge 3중 접합 셀이다. 본 논문은 정지궤도 비행 데이터에 대한 경향을 분석한 결과를 바탕으로 설계수명 말기에서 태양전지 배열기의 전력 성능을 평가하였다. 설계수명 말기에서 예측한 태양전지 배열기의 전력 성능은 태양전지 배열기 제작사가 제공한 전력 성능과 비교하였다. 경향분석 결과를 통해 태양전지 셀은 현저한 성능감소 없이 정상적으로 동작되고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.482-485
• /
• 1991

This paper discusses a maximum power point tracking controller (MPPTC) by using chopper with an adjustable input to output voltage. The MPPTC is determined by sensing only the actual voltage from solar cell array. It is simple and continuously tracks the solar cell array maximum power point regardless of the load type. Also, the system obtains protection circuit to protect overcharge and disovercharge against the battery.

• 태양에너지
• /
• 제18권3호
• /
• pp.129-135
• /
• 1998

A photovoltaic system is an infinite and clean energy system. A photovoltaic system consists of a solar cell array, a converter, a inverter and a control unit. It is necessary that the Maximum Power Point Tracker(MPPT) is applied to the photovoltaic system because the output power of solar cell array is varied with irradiation, temperature and external effects. In this paper, the neural networks theory, one of the control methods, is applied to track the maximum power point of the photovoltaic system. The MPPT using neural networks theory is proposed to improve existing energy converter efficiency. Also the theory is applied to operation of inverter type airconditionig system.