• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.67-72
• /
• 2003

본 논문에서는 다목적실용위성 1호의 태양전지를 모델링하고 해석하였다. 태양전지판의 모델링은 적은 수의 데이터만을 갖고 있으므로 비선형 시스템을 모델링하는 데 적합한 누럴 알고리즘을 사용하였다. 모델링 결과는 다목적실용위성 1호의 태양전지 셀 데이터를 고려한 태양전지판의 해석과 시뮬레이션에 의해 그 특성을 증명하였다. 또한, 태양전지판의 특성 및 전력발생 특성은 모델링 결과를 사용하여 해석하였다

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.365-369
• /
• 1997

In this paper, solar array of KOMPSAT was modeled and analyzed. The modeling results of solar array was achieved by neural algorithm, which is powerful of nonlinear system with a few data sets. The algorithm was analyzed and verified by simulation considering on solar cell data of KOMPSAT. The characteristics VI curves and power generation of solar array are analyzed by using the modeling.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.837-842
• /
• 2009

구성 모드(Component mode) 합성법을 이용하여, 태양전지판의 유연구조 진동특성을 고려한 위성의 축약된 동적 모델링 기법을 수립하였다. 유연구조 위성의 본체와 태양전지판을 서로 다른 두 개의 부구조물로 나누고, 각각의 국부좌표계에 대하여 유도된 부구조물 표현식들을 위성 전체의 기준좌표계에 대해서 합성하였다. 수립된 부구조물 합성법은 단일 태양전지판을 갖는 유연구조 위성의 수치적 예제에 적용되었으며, 태양전지판의 회전을 고려한 전달함수 결과의 고찰을 통하여 동적 모델링 기법의 타당성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.204-207
• /
• 2004

The paper proposes a simulation model of grid-connected photovoltaic generation system (PV system) using on PSCAD/EMTDC, a reliable power system and apparatus transient analysis program. A equivalent circuit model of a solar cell is used for modeling solar array. A series of parameters required for array modeling are deduced from general specification data of a solar module. A PWM voltage source inverter (VSI) model is presented and current control scheme is implemented for VSI control. A maximum power point tracking (MPPT) technique is applied for controlling the PV system. Simulation case study provides V-I and V-P characteristics of solar array and PV system control performance for irradiation changes.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권3호
• /
• pp.107-116
• /
• 2005

The paper addresses modeling and analysis of a grid-connected photovoltaic generation system (PV system). PSCAD/EMTDC, an industry standard simulation tool for studying the transient behavior of electric power system and apparatus, is used to conduct all aspects of model implementation and to carry out extensive simulation study. This paper is aimed at sharing with the PSCAD/EMTDC user community our user-defined model for PV system applications, which is not yet available as a standard model within PSCAD/EMTDC. An equivalent circuit model of a solar cell has been used for modeling solar array. A series of parameters required for array modeling have been estimated from general specification data of a solar module. A PWM voltage source inverter (VSI) and its current control scheme have been implemented. A maximum power point tracking (MPPT) technique is employed for drawing the maximum available energy from the PV array. Comprehensive simulation results are presented to examine PV array behaviors and PV system control performance in response to irradiation changes. In addition, dynamic responses of PV array and system to network fault conditions are simulated and analysed.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.338-346
• /
• 2006

In this paper, the test results of medium-size(120 kW class) PV system which was installed in the Taeahn thermal power station of Korea Western Power Co., Ltd., were summarized for developing the practical technology to applicate high voltage grid connection PV system. The 120 kW photovoltaic system which was consisted of 1,300 modules, PCS, and 150 kVA transformer station has been operated since Aug. 05, 2005. For verifying the modeling results of PV system, the operation data was compared with modeling results which was executed commercial PSCAD/EMTD and Psim tools. An equivalent circuit model of a solar cell has been also used for solar array modeling. A series of parameters required for array modeling have been estimated from general specification data of a solar module. A PWM voltage source inverter(VIS) and its current control scheme have been analyzed by using P&O (perturbation and Observation) MPPT algorithms technique.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.127-131
• /
• 2005

The paper addresses modeling and analysis of a grid-connected photovoltaic generation system (PV system). PSCAD/EMIDC. an industry standard simulation tool for studying the transient behavior of electric power system and apparatus. is used to conduct all aspects of model implementation and to carry out extensive simulation study. An equivalent circuit model of a solar cell has been used for modeling solar array. A PWM voltage source inverter (VSI) and its current control scheme have been implemented. A maximum power point tracking (MPPT) technique is employed for drawing the maximum available energy from the PV array. Comprehensive simulation results are presented to examine PV array behaviors and PV system control performance in response to irradiation changes. In addition, dynamic responses of PV array and system to network fault conditions are simulated and analysed

• Journal of Astronomy and Space Sciences
• /
• 제28권2호
• /
• pp.133-141
• /
• 2011

A satellite power system should generate and supply sufficient electric power to perform the satellite mission successfully during the satellite mission period, and it should be developed to be strong to the failure caused by the severe space environment. A satellite power system must have a high reliability with respect to failure. Since it cannot be repaired after launching, different from a ground system, the failures that may happen in space as well as the effect of the failures on the system should be considered in advance. However, it is difficult to use all the hardware to test the performance of the satellite power system to be developed in order to consider the failure mechanism of the electrical power system. Therefore, it is necessary to develop an accurate model for the main components of a power system and, based on that, to develop an accurate model for the entire power system. Through the power system modeling, the overall effect of failure on the main components of the power system can be considered and the protective design can be devised against the failure. In this study, to analyze the failure mode of the power system and the effects of the failure on the power system, we carried out modeling of the main power system components including the solar array regulator, and constituted the entire power system based on the modeling. Additionally, we investigated the effects of representative failures in the solar array regulator on the power system using the power system model.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.47-58
• /
• 2018

A solar array simulator (SAS) consists of an engine that generates a setpoint according to panel characteristics, a power stage that provides the actual output, and a controller. Particularly, if the control method is not suitable due to the nonlinearity of the solar panel output curve depending on the irradiation amount and the temperature, and the variation of the curve factor depending on the various panel materials, then the panel simulation function cannot be performed properly. Current and voltage mode controls are usually used for the conventional control method. However, these control methods deteriorate the control performance near the maximum power point; thus, a hybrid control method using two or more controllers has been investigated. In this study, we analyze the hybrid control method using three controllers divided into different areas. The design equation of the controller is derived based on the small signal modeling of each controller, and the simulation performance of the solar array simulator verifies its stability and response speed.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.135-143
• /
• 2003

Solar radio astronomy is about to undergo a revolution with the advent of a new radio synthesis array, the Frequency Agile Solar Radiotelescope (FASR). The array will consist of more than 100 antennas (5000 baselines), and will be designed to meet the special challenges of solar imaging. It will produce high-quality images at hundreds of frequencies in the range 20 MHz-24 GHz. We briefly describe the plans for the instrument, and then concentrate on the range of science that is expected to be addressed, using current state-of-the-art solar radio observations and modeling to illustrate FASR performance. We end with an assessment of the current status of the instrument, and plans for future.