• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.125-153
• /
• 2005

It has been widely known that the seismic piezo-cone penetration test (SCPTU) is one of the most useful techniques for investigating the geotechnical characteristics including dynamic soil properties. As the practical applications in Korea, SCPTU was carried out at two sites in Busan and four sites in Incheon, which are mainly composed of alluvial or marine soil deposits. From the SCPTU waveform data obtained from the testing sites, the first arrival times of shear waves were and the corresponding time differences with depth were determined using the cross-over method, and the shear wave velocity profiles (VS) were derived based on the refracted ray path method based on Snell's law and similar to the trend of cone tip resistance (qt) profiles. In Incheon area, the testing depths of SCPTU were deeper than those of conventional down-hole seismic tests. Moreover, for the application of the conventional CPTU to earthquake engineering practices, the correlations between VS and CPTU data were deduced based on the SCPTU results. For the empirical evaluation of VS for all soils together with clays and sands which are classified unambiguously in this study by the soil behavior type classification Index (IC), the authors suggested the VS-CPTU data correlations expressed as a function of four parameters, qt, fs, $\sigma$, v0 and Bq, determined by multiple statistical regression modeling. Despite the incompatible strain levels of the down-hole seismic test during SCPTU and the conventional CPTU, it is shown that the VS-CPTU data correlations for all soils clays and sands suggested in this study is applicable to the preliminary estimation of VS for the Korean deposits and is more reliable than the previous correlations proposed by other researchers.

• Korean Journal of Microbiology
• /
• v.17 no.3
• /
• pp.97-130
• /
• 1979

Many industrial processes those employ bacteria are subjected to phage infestations. In L-glutamic acid fermentions using acetic acid, the phage infestations of the organisms have been recently recognized. In efforts to elucidate the sources of phage contamination involved in the abnormal fermentation, a series of study was conducted to isolate the phages both from the contents of abnormally fermented tanks and the soil or sewage samples from the surroundings of a fermentation factory, to define major charateristics of the phage isolates, and finally to determine the correlation between the phage isolates and temperate phages originating from the miscellaneous bacterial species isolated from the soil or sewage samples. The results are summarized as follows; 1) All phages were isolated from the irregular fermentation tanks and soil or sewage samples, and they were designated as phage PR-1, PR-2, PR-3, PR-4, PR-5, PR-6, and PR-7, in the order of isolation. These PR-series phages were proved to be highly specific for the variant strains of Br. lactofermentum only, namely, phage PR-1 and PR-2 for Br. lactofermentum No. 468-5 and phage PR-3~PR-7 for Br. lactofemrentum No. 2256. By cross-neutralization test, the 7 phagescould be subdivided into 3 groups, i. e., phage PR-I and PR-2 the first, phage PR-3, PR-4, PR-5, PR-6 the second, and the phage PR-7 the third. 2) The 7 phages were virulent under the experimental conditions. They produced plaques with clear and relatively sharp margins without distinct halo. The mean sizes of plaques were 1.5mm in diameter for phage PR-1 and PR-2, and 1. Omm for phages PR-3~PR-7. Double layer technique modified by Hongo and described by Adams, was applied to assay of the PR-series phages. The factors influencing the plaques were as follows;young age cells of host bacteria cultured for 3-6 hours represented the largest number and size, optimum was pH 7.0, incubation temperature was $30^{\circ}C$, and agar concentration and amount of overlayer medium were 0.6% and 0.2ml, respectively. 3) PR-series phages were stable in 0.05M tris buffer and 0.1M ammonium acetate buffer solution. The addition of $5{\times}10^{-3}M$ magnesium ion effectively increased the stability. Thermostability experiments indicated that PR-series phages were stable at the teinperture between $50^{\circ}{\sim}55^{\circ}C$ in nutrient medium, $45^{\circ}{\sim}50^{\circ}C$ in buffer solution. However, the phages mere completely inactivated at 603C and 65$^{\circ}$C within 10 minutes. The phages were stable at the range of pH6~9 in nutrient medium and of pH 8-9 in buffer solution, respectively. Exposure of the phages to UV for 25, 60 and 100 seconds resulted in the complete loss of infectivily, respectively. 4) Electron microscopy showed that PR-series phage particles exhibited rather similar morphology, differing in the size All of PR-series phages had a multilateral head and had a simple long tiil about three to five times long as compared with head. By the size, phage PR-1 and PR-2, PR-3, PR-4, PR-5, and PR-6 and PR-7 were classified into same groups, respectively. The head and tail size of phage PR-1, PR-5, PR-5(T) and PR-7 were 85nm, 74nm and 235nm and 350mm, and 72nm and 210nm, respectively. 5) Nucleic acids of PR-series phages were double stranded DNA. The G+C contents of phage PR-1, PR-5 and PR-7 were 56.1, 52.9 and 53.7, respectively. The values of G+C contents derived from the $T_m$ were in agreement with the chemically determined values. 6) PR-series phages effectively adsorbed on their host bacteria at the rate of more than 90% during 5 min. K value for phage PR-1, PR-5 and PR-7 were calculated to be $6{\times}10^9 ml$ per minute, respectiveky. The pH of the medium did effect adsorption rate, but both temperature and age of host cells did not. Generally, optimum adsorption condition of phages seemed to be almost same as optimum growth conditions of host bacteria. 7) In one-step growth experiments, the latent periods at $30^{\circ}C$ for PR-1, and PR-7 were about 70, 50 and 55 min, respectively. The corresponding average burst size was 200, 70 and 90, respectively. Lpsis period according to the multiplicity of infection and a phage series. In case of m. o. i. 100, strain No. 2256 (PR-5) and No. 468-5(PR-1) failed to grow and turbidity decreased after 50 and 70min, respectively. 8) In the lysate of a plaque purified phage PR-5 infected bacteria, there observed 2 types ofphage particles, i. e., phage PR-5 and PR-5 (T) of similar morphology but differing at the length of phage tail, and phage tail like particles. The phage taillike particles could be divided into 4 types by the length. Induction experiments of Br. lactofermentum with UV irradiation, mitomycin C or bacitracin treatment produced neither phage PR-5 (T) or phage tail-like particles. 9) No lysis occured when the growth of 7 strains of miscellaneous bacteria, isolated from soil and sewage samples, were inoculated with either phage PR-5 (T) or phage tail-like particles the inoculation of phage PR-5 pellet resulted in the growth inhibition of the orgainsms in the spot test. The lysates obtained from 3 miscellaneous soil derived bacteria following mitomycin C treatment the growth of Br. lactofermentum, but did not lyze the bacterium.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2007

The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.510-522
• /
• 2022

In this study, to biosynthesize PHA with properties more similar to polypropylene, a Bacillus sp. EMK-5020 strain that biosynthesized poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was isolated from soil. Bacillus sp. EMK-5020 strain biosynthesized PHBV containing 1.3% 3-hydroxyvalerate (3HV) using reducing sugar contained in Makgeolli lees enzymatic hydrolysate (MLEH) as a single carbon source. As the amount of propionic acid, which was added as a second carbon source, increased, the content of 3HV also increased. PHBV containing up to 48.6% of 3HV was synthesized when 1.0 g/l of propionic acid was added. Based on these results, the strain was cultured for 72 hr in a 3 l fermenter using reducing sugar in MLEH (20 g/l) and propionic acid (1 g/l) as the main and secondary carbon sources, respectively. As a result, 6.4 g/l DCW and 50 wt% of PHBV (MLEH-PHBV) containing 8.9% 3HV were biosynthesized. Through gel permeation chromatography and thermogravimetric analysis, it was confirmed that the average molecular weight and the decomposition temperature of MLEH-PHBV were 152 kDa and 273℃, respectively. In conclusion, the Bacillus sp. EMK-5020 strain could biosynthesize PHBV containing various 3HV fractions when MLEH and propionic acid were used as carbon sources, and PHBV-MLEH containing 8.9% 3HV was confirmed to have higher thermal stability than standard PHBV (8% 3HV).

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.971-978
• /
• 2022

Sulfur-oxidizing, ammonium-oxidizing, and nitrogen-oxidizing media were used to isolate bacteria to degrade malodor gas effectively in piggery manure or soil. Twelve different strains were isolated: Paenibacillus amylolyticus, Rhodococcus jostii, Rhodococcus qingshengii, Rhodococcus opacus, Alcaligenes faecalis, Alcaligenes faecalis, Kastia adipate, Kastia adipata, Microbacterium oxydans, Halomonas campisalis, Acinetobacter oleivorans, and Micrococcus luteus. By inoculating each strain in the piggery liquid manure by 1%, the pH in most strain treatments was maintained at 8.0. Total bacterial counts were maintained at 7.3~7.9 log CFU/ml until 15 days, and then they dropped dramatically down to 5.1~5.5 log CFU/ml. On the 30th day, the treatment group inoculated with Rhodococcus opacus SK2659 showed a relatively high level of ammonium nitrogen removal, which was 39% of that of the control group. When Rhodococcus opacus SK2659 was inoculated, H2S concentration after 100 days was 3.23% compared with the control (no inoculation), suggesting that Rhodococcus opacus SK2659 is an excellent strain for removing malodor gas. The gas production of the treatments was lower than that of the control. The total accumulated amount of gas production in most strain treatments was a quarter of the gas production compared to the control throughout the experimental periods. Acinetobacter oleivorans SK2675 showed the lowest level at 12.39% compared to the control in gas production. In conclusion, the use of mixture strains, such as Rhodococcus opacus SK2659 and Acinetobacter oleivorans SK2675 isolated in this study could increase the efficacy of malodor gas reduction in the biological treatment of piggery manure.

• BMB Reports
• /
• v.40 no.5
• /
• pp.773-782
• /
• 2007

Different isolates of the soil bacterium Bacillus thuringiensis produce multiple crystal (Cry) proteins toxic to a variety of insects, nematodes and protozoans. These insecticidal Cry toxins are known to be active against specific insect orders, being harmless to mammals, birds, amphibians, and reptiles. Due to these characteristics, genes encoding several Cry toxins have been engineered in order to be expressed by a variety of crop plants to control insectpests. The cotton boll weevil, Anthonomus grandis, and the fall armyworm, Spodoptera frugiperda, are the major economically devastating pests of cotton crop in Brazil, causing severe losses, mainly due to their endophytic habit, which results in damages to the cotton boll and floral bud structures. A cry1Ia-type gene, designated cry1Ia12, was isolated and cloned from the Bt S811 strain. Nucleotide sequencing of the cry1Ia12 gene revealed an open reading frame of 2160 bp, encoding a protein of 719 amino acid residues in length, with a predicted molecular mass of 81 kDa. The amino acid sequence of Cry1Ia12 is 99% identical to the known Cry1Ia proteins and differs from them only in one or two amino acid residues positioned along the three domains involved in the insecticidal activity of the toxin. The recombinant Cry1Ia12 protein, corresponding to the cry1Ia12 gene expressed in Escherichia coli cells, showed moderate toxicity towards first instar larvae of both cotton boll weevil and fall armyworm. The highest concentration of the recombinant Cry1Ia12 tested to achieve the maximum toxicities against cotton boll weevil larvae and fall armyworm larvae were 230 ${\mu}g/mL$ and 5 ${\mu}g/mL$, respectively. The herein demonstrated insecticidal activity of the recombinant Cry1Ia12 toxin against cotton boll weevil and fall armyworm larvae opens promising perspectives for the genetic engineering of cotton crop resistant to both these devastating pests in Brazil.

• Microbiology and Biotechnology Letters
• /
• v.39 no.1
• /
• pp.37-42
• /
• 2011

I isolated the actinomycete strain KH223 from soil samples collected from the Kye Ryong mountain area. This strain is antagonistic to the multidrug-resistant Acinetobacter baumannii. KH223 was confirmed as belonging to the genus Streptomyces based on the scanning electronmicroscopy(SEM) observations of the diaminopimelicacid(DAP) type and morphological and physiological characteristics. Comparison of the 16S rDNA nucleotide sequences revealed that KH223 has a relationship with Streptomyces galbus. Production of antibiotics by KH223 was most favorable when cultured on a glucose, polypeptone, and yeast extract(PY) medium for 6 days at 27$^{\circ}C$. The supernatant was found to exhibit an antimicrobial effect on various kinds of bacteria and fungi. Particularly, butanol and ethylacetate extracts of KH223 and cyclo(trp-trp) exhibited significant activity against A. baumannii at concentration ranges of 0.8-12.5 ${\mu}g$/mL, 5.0-25 ${\mu}g$/mL and 12.5${\rightarrow}$100 ${\mu}g$/mL, respectively. Moreover, in contrast to cyclo(trp-trp) had shown to activity against Micrococcus luteus JCM 1464 at the concentration of 12.5 ${\mu}g$/mL, the butanol extract of KH223 showed significant activity against Bacillus subtilis IAM 1069 and Micrococcus luteus JCM 1464 at the concentration of 0.4 and 0.8 ${\mu}g$/mL, respectively. These results suggest that KH223 may have a great potential in the production of new antibiotics to combat multidrug-resistant pathogens and further studies may be warranted for the same.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.454-459
• /
• 2013

Beet armyworm, Spodoptera exigua is difficult to control using chemical insecticides because of the fast development of insecticide resistance. For eco-friendly beet armyworm managements, various control agents are required. Entomopathogenic fungus is one of the promise control agents as an alternative to chemical control agent. We isolated entomopathogenic fungi from soil samples of Yangpyeong, Gyeonggi-do by insect-bait method using Tenebio molitor and conducted bioassay to larva of beet armyworm. The result of bioassay, a selected strain FT83 showed 100% mortality against third instar larva of S. exigua. On the basis of morphological characteristics and analysis of 18srRNA sequence for ITS, the strain FT83 was identified as a Metarhizium anisopliae. The mortality of beet armyworm showed $81.6{\pm}9.3%$ at $1{\times}10^6$ conidia/ml, 100% at $1{\times}10^7$ conidia/ml and 100% at $1{\times}10^8$ conidia/ml respectively. Therefore, we recommend to proper control efficacy against S. exigua in which more than $1{\times}10^7$ conidia/ml suspension of M. anisopliae FT83.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5179-5186
• /
• 2012

Miglitol, a well-known therapeutic intervention agents for diabetes, exhibits competitive inhibitory activity against ${\alpha}$-glucosidase and it is usually produced through three sequential steps including chemical and bioconversion processes. Gluconobactor oxydans (G. oxydans) belonging to acetic acid bacteria biologically, converts 1-deoxy-1-(2-hydroxyethylamino)-D-glucitol (P1) into a key intermidiate, 6-(2-hydroxyetyl) amino-6-deoxy-${\alpha}$-L-sorbofuranose (P2) by incomplete oxidation. In this study, we identified and optimized fermentation conditions of CK-2165, that was selected in soil samples by comparing the bioconversion yield. CK-2165 strain was found to be closely related to G. oxydans based on the result of phylogenetic analysis using 16S rDNA sequence. Utilization of API 20 kits revealed that this strain could use glucose, mannose, inositol, sorbitol, rhamnose, sucrose, melibiose, amygdalin and arabinose as carbon sources. The culture conditions were optimized for industrial production and several important factors affecting bioconversion rate were also tested using mycelial cake. Cell harvested at the late-stationary phase showed the highest bioconversion yield and $MgSO_4$ was critically required for the catalytic activity.