• Geomechanics and Engineering
• /
• v.20 no.4
• /
• pp.359-370
• /
• 2020

Prestressed ground anchors are important structural elements in geotechnical engineering. Despite their widespread usage, the design process is often significantly simplified. One of the major drawbacks of commonly used design methods is the assumption that skin friction is mobilized uniformly along an anchor's fixed length, one consequence of which is that a progressive failure phenomenon is neglected. The following paper introduces an alternative design approach - a computer algorithm employing the load-transfer method. The method is modified for the analysis of anchors and combined with a procedure for the derivation of load-transfer functions based on commonly available laboratory tests. The load-transfer function is divided into a pre-failure (hardening) and a post-failure (softening) segment. In this way, an aspect of non-linear stress-strain soil behavior is incorporated into the algorithm. The influence of post-grouting in terms of radial stress update, diameter enlargement, and grout consolidation is included. The axial stiffness of the anchor body is not held constant. Instead, it gradually decreases as a direct consequence of tensile cracks spreading in the grout material. An analysis of the program's operation is performed via a series of parametric studies in which the influence of governing parameters is investigated. Finally, two case studies concerning three investigation anchor load tests are presented.

• Journal of Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.135-139
• /
• 2006

A alkalophilic strain, Bacillus licheniformis MH31 producing an alkaline protease was isolated from mine soil of Boryeong in Korea. Production of a high level of alkaline protease was achieved 42 h after incubation when the bacterium was grown at pH 9.0 and $35^{\circ}C$ in Horikoshi medium supplemented with 0.5%(w/v) starch and 1%(w/v) skim milk as carbon and nitrogen source, respectively. The molecular weight of partially purified enzyme was estimated to be 30 kDa by SDS-PAGE and its optimum pH was pH 10. The enzyme showed optimum temperature at $50^{\circ}C$, and was stable up to $60^{\circ}C$ after 1 h incubation. The protease was strongly inhibited by 1 mM of PMSF which was known well as strong inhibitor of serine proteases, but almost not inhibited by 5 mM of EDTA and 1,10-phenanthroline. When the protein hydrolysis products of 1% skim milk by partially purified protease was compared with available commercial proteases using HPLC analysis, most of hydrolysis products were detected below molecular weight of 10,000 and the hydrolysis ratio of purified enzyme was 24.8% lower than those(above 32%) of commercial proteases.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.157-164
• /
• 2003

An alkali-tolerant bacterium producing the xylanase was isolated from soil and identified as Bacillus alcaiophilus. This strain, named B. alcalophilus AX2000, was able to grow and produce xylanase optimally at pH 10.5 and $37^{\circ}C$. The maximum xylanase production was obtained when 0.5%(w/v) birchwood xylan and 0.5%(w/v) polypeptone and yeast extract were used as carbon source and nitrogen source, respectively. The biosynthesis of xylanase was under the catabolite repression by glucose in the culture medium, and inhibited in the presence of high concentration of xylose. The maximum activity of xylanase was observed at pH 10.0 and $50^{\circ}C$ and the enzyme activity remained was over 80% at $60^{\circ}C$ and from pH 5.0 to 11.0.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2219-2228
• /
• 2015

The proposed RDT(Reversed Double T) girder bridge is suitable to eco corridor, because of its cross section which resembles Korean alphabet vowel "ㅛ". The total height and cost of bridge would be reduced for its inner space containing some of plant soil. In this study, the performance of the RDT girder was assessed by comparing results of static test with those of nonlinear analysis. The cracking load of the RDT girder was evaluated more than two times of design load.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.332-338
• /
• 2002

A strain YB-4 producing the extracellular $\alpha$-galactosidase was isolated from soil, and has been identified as Streptomyces sp. on the basis of its cultural, morphological and physiological properties. The partially purified $\alpha$-galactosidase was most active on paranitrophenyl-$\alpha$-D-galactopyranoside at pH 6.0 and 6$0^{\circ}C$. The enzyme retained 90% of its maximum activity between pH 4.0 and pH 10.0 after pre-incubation for 1 h. The enzyme was able to hydrolyze oligomeric substrates such as melibiose, raffinose and stachyose to liberate galactose residue, indicating that the $\alpha$-galactosidase of Steptomyces sp. YB-4 hydrolyzed $\alpha$-1,6 linkage.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.346-351
• /
• 2002

A bacterium producing the neutral pretense was isolated from soil, and was identified as Bacillus sp. DS-1 by 16S rRNA sequence comparison and biochemical determinations. The production of protease from Bacillus sp. DS-1 was increased 20% and 30% by the additions of 1% glucose and 1% yeast extract, respectively. The optimum pH and temperature for the protease activity were pH 7.0 and 55$^{\circ}C$. Bacillus sp. DS-1 produced a metalloprotease as a major protease in culture medium, since the pretense activity in culture supernatant was inhibited by the presence of 1 mM EDTA significantly.

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.88-93
• /
• 1991

The biodegradable bacteria for fats and oils were isolatcd from soil and wastewater. The isolated strain was designated as LW-27 which had high COD removal rate and biodegr2idability on fats and oils, and was identified as pseudomonas chlrorapihis. The cell viability of LW-27 which produced by vacuum drying at $45^{\circ}C$ for 24 hours was 82%. When the wastewater was mixed with LW-27 agent (0.1g/ day) on the activated sludge unit, the removal rates of COD, BOD and n-hexanc extract of the effluents were about 92.9%, 94.8% and 98.0%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.573-579
• /
• 1995

A Bacillus strain capable of producing an extracellular malto-oligosaccharides forming $\alpha $-amylase was isolated from soil and designated as Bacillus sp. SUH4-2. The enzyme was purified by ammonium sulfate fractionation, DEAE-Toyopearl and Mono-Q HR 5/5 column chromatographies using a FPLC system. The specific activity of the enzyme was increased by 16.1-fold and the yield was 13.5%. The optimum temperature for the activity of $\alpha $-amylase was 60-65$\circ$C and more than 50% of initial activity was retained after the enzyme was incubated at 60$\circ$C for 40 min. The enzyme was stable over a broad pH range of 5.0-8.0 and the optimum pH was 5.0-6.0. The molecular weight of the enzyme was determined to be about 63.6 kD and isoelectric point was around 5.8. The enzyme activity was strongly inhibited by Mn$^{2+}$, Ni$^{2+}$, and Cu$^{2+}$ ; slightly by Ca$^{2+}$. The purified enzyme produced starch hydrolyzates containing mainly maltose and maltotriose from soluble starch. The starch hydrolyzates were composed of 11% glucose, 59% maltose, 25% maltotriose and 5% maltotetraose.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.212-217
• /
• 1997

A strain of Bacillus sp. WS-14 was isolated from soil. Medium optimization for ${\beta}-mannanase$ production by Bacillus sp. WS-14 was performed. Effect of various carbon sources on ${\beta}-mannanase$ production was investigated and locust bean gum was the most effective for ${\beta}-mannanase$ production. ${\beta}-mannanase$ activity and cell growth increased with increasing the concentration of locust bean gum, however, the amounts were not significant. Among nitrogen sources, soytone was the most effective for ${\beta}-mannanase$ production. Inorganic compounds such as $KH_2PO_4,\;NaCl\;Na_2CO_3\;and\;MgSO_4{\cdot}7H_2O\;on\;{\beta}-mannanase$ production were optimized for ${\beta}-mannanase$ production. Locust bean gum of 10.0 g/l, soytone of 5.0 g/l, $KH_2PO_4$ of 2.0 g/l, NaCl of 10.0 g/l, $MgSO_4{\cdot}7H_2O\;of\;0.2\;g/l,\;Na_2CO_3$, of 2.0 g/l were selected as optimum content. Production of ${\beta}-mannanase$ by using the optimum medium was carried out. The maximum ${\beta}-mannanase$ activity of 20.8 unit/ml could be obtained after 14 h fermentation which corresponed to the productivity of ${\beta}-mannanase$ of 1.48 unit/ml-h.

• Archives of Pharmacal Research
• /
• v.20 no.4
• /
• pp.372-374
• /
• 1997

In order to develop new anti-inflammatory agents having different action mechanisms compared with nonsteroidal and steroidal anti-inflammatory drugs, the culture broths of various actinomycetes isolated from soil were screened using an in vivo mouse ear edma assay and one strain (Streptomyces sp. MT 2705-4: KCTC 8651 P) was selected. Activity-guided purification led to the isolation of a polyether compound, dianemycin. Topically, dianemycin showed a potent anti-inflammatory activity in mouse ear edema induced by croton-oil or arachidonic acid.$ED_{50}$value of dianemycin was found to be 0.8 mg,/ear compared to 0.4 mg/ear of prednisolone in croton-oil ear edema. However, dianemycin did not show the inhibitory activity in UV-erythema and delayed hypersensitivity reaction. These results indicate that dianemycin is a potential topical anti-inflammatory agent.