• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.8-11
• /
• 1997

Current methods of evaluating soil contamination by heavy metals rely on analyzing samples for total contents of metals or quantities recovered in various chemical extracting solutions. Results from these approaches provide only an index for evaluation because these methodologies yield values not directly related to bioavailability of soil-borne metals. In addition, even though concentrations of metals may be less than those required to cause toxic effects to biota, they may cause substantial effects on soil chemical parameters that determine soil quality and sustainable productivity. The objective of this research was to characterize effects of Cu or Cd additions on soil solution chemistry of soil quality indices, such as pH, EC, nutrient cation distribution and quantity/intensity relations (buffer capacity). Metals were added at rates ranging from 0 to 400 mg/kg of soil. Soil solution was sequentially extracted from saturated pastes using vacuum. Concentrations of Cu or Cd remaining in soil solutions were very low as compared to those added to the soils, warranting that most of the added metals were recovered as nonavailable (strongly adsorbed) fractions. Adsorption of the added metals released cations into soil solution causing increases of soluble cation contents and thus ionic strength of soil solution. At metal additions of 200~400 mg/kg, EC of soil solution increased to as much as 2~4 dS/m; salinity levels considered high enough to cause detrimental effects on plant production. More divalent cations (Ca+Mg) than monovalent cations (K+Na) were exchanged by Cu or Cd adsorption. The loss of exchangeable nutrient cations decreased long-term nutrient supplying capacity or each soil. At 100 mg/kg or metal loading, the buffering capacity was decreased by 60%. pH of soil solution decreased linearly with increasing metal loading rates, with a decrement of up to 1.3 units at 400 mg Cu/kg addition. Influences of Cu on each of these soil quality parameters were consistently greater than those of Cd. These effects were of a detrimental nature and large enough in most cases to significantly impact soil productivity. It is clear that new protocols are needed for evaluating potential effects of heavy metal loading of soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.356-361
• /
• 2014

The coal fly ash (CFA) may be utilized as an extender for organic waste composting at the same time fully expected to solve all industrial waste disposal and sawdust tribe. The main objective in this study was to evaluate the effect of CFA addition as a bulking agent for swine manure composting. To determine the suitable addition rate of CFA as a bulking agent, 0, 10, 20 and 30% of saw dust were mixed with 30, 20, 10 and 0% of coal fly ash, respectively. Compost quality for swine manure composting was to evaluate temperature, pH, C/N ratio, and phytotoxicity as germination index. Stability of compost increased with increasing levels of CFA as bulking agent during swine manure composting due to the high alkaline materials including CFA. C to N ratio in treatment added CFA was higher than that of the control without CFA. After finishing composting, germination index of lettuce and cabbage in swine manure compost added 10% of CFA was similar to the control, all the heavy metal contents were far below the stipulated standard for organic farming. These results indicated tahr coal fly ash as bulking agents might be alternative materials to save saw dust and apply industrial products for swine manure composting.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.63-69
• /
• 1986

1. Chemical components of fresh tobacco leaves at topping stages were affected variously by fertilizer application level. The more fertilizers were applicated, the higher nitrogen content of leaves was shown regardless of the soil fertility, but phosphorus content was not affected either by phosphorus rate or soil fertility. Potassium content was higher in the leaves grown in fertile soil than infertile at the same application rate. 2. Maturation of tobacco leaves was delayed by applying high level of nitrogen fertilizer, especially in fertile soil. The excessive accumulation of nitrogen in tobacco leaves at later stage of growth resulted in poor quality index for the high content of nicotine and low content of reducing sugar in cured leaves. 3. Nicotine content of cured leaf was increased significantly as nitrogen content increased, regardless of soil fertility, but reducing sugar content was reduced. Nicotine and reducing sugar content of cured leaf were higher in fertile than in infertile soil. 4. Resulting from the facts that nicotine contents were negatively correlated and reducing sugar contents were positively correlated with grading value (Won/Kg), authors suggested that grading index (Won/Kg) of the Office of Monopoly be based on quality index from chemical components of cured leaves.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.85-98
• /
• 2003

There has recently been an increasing interest of the watershed management as a solution to a wide range of problems related water environment, therefore this study attempted to construct the environment information system to monitor the Geumho River watershed, and to evaluate the impacts of the watershed characteristics on stream water quality. A detailed GIS database to analyze the environmental characteristics at the subwatershed units, including 1:25,000 scale topographical maps, detailed soil maps, land use, 10m-resolution DEMs, roads, streams, vegetation index(NDVI) calculated from Landsat TM imagery, rainfall, and soil loss using RUSLE, is compiled for the study area. The set of variables representing watershed urbanization or industrialization, residential and commercial landuse, industrial landuse, and road area have significantly negative(-) relationship with water quality variables(BOD, COD, SS, T-N, T-P). On the other hand, watershed indicators related to natural environmental conditions, forest cover and vegetation index(NDVI) in each subwatershed were significantly positive(+) relationship with water quality. Three other variables, agricultural landuse, amount of fertilizer and pesticides, and potential soil loss, were not significant in explaining the correlations between watershed environment and stream water quality.

• Water Engineering Research
• /
• v.5 no.2
• /
• pp.55-68
• /
• 2004

The GLEAMS (Groundwater Loading Effects of Agricultural Management System, version 3.0) water quality model was used to predict hydrology and water quality and to evaluate the effects of soil types from a cattle-grazed pasture field of Bermuda-Rye grass rotation with poultry litter application as a fertilizer in North Alabama. The model was applied and evaluated by using four years (1999-2002) of field-measured data to compare the simulated results for the 2.71- ha Summerford watershed. $R^2$ values between observed and simulated runoff, sediment yields, TN, and TP were 0.91, 0.86, 0.95, and 0.69, respectively. EI (Efficiency Index) of these parameters were 0.86, 0.67, 0.70, and 0.48, respectively. The statistical parameters indicated that GLEAMS provided a reasonable estimation of the runoff, sediment yield, and nutrient losses at the studied watershed. The soil infiltration rates were compared with the rainfall events. Only high intensity rainfall events generated runoff from the watershed. The measured and predicted infiltration rates were higher during dry soil conditions than wet soil conditions. The ratio of runoff to precipitation was ranging from 2.2% to 8.8% with average of 4.3%. This shows that the project site had high infiltration and evapotranspiration which generated the low runoff. The ratio of runoff to precipitation according to soil types by the GLEAMS model appeared that Sa (Sequatchie fine sandy loam) soil type was higher and Wc (Waynesboro fine sandy loam, severely eroded rolling phase) soil type relatively lower than the weighted average of the soil types in the watershed. The model under-predicted runoff, sediment yields, TN, and TP in Wb (Waynesboro fine sandy loam, eroded undulating phase) and Wc soil types. General tendency of the predicted data was similar for all soil types. The model predicted the highest runoff in Sa soil type by 105% of the weighted average and the lowest runoff in Wc soil type by 87% of the weighted average

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.92-101
• /
• 1997

This study was conducted to investigate the effect of fly ash on the yield and quality and to determine the optimum application amount of fly ash for tobacco(Nicotiana tabacum L). Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 20, 40, 60 MT/ha. Dry weights of tobacco at middle and topping growth stage were increased with application of fly ash, showing the highest dry weight at 40 MT/ha in both kinds of fly ash. It was showed that the bituminous coal had a little more effective for yield than that of anthracite. Comparing with the control, yields of tobacco applied with fly ash were significantly increased about 17.7% and 17.1% by the application of bituminous coal and anthracite, respectively. Quality of flue-cured leaves was better by application of fly ash than that of the control. The quality index was given the highest at 40 MT/ha for bituminous coal increasing by 24.6% and at 60 MT/ha fur anthracite increasing by 13.4% compared with the control. The economical efficiency considered of the yield and quality of tobacco was the highest at 40 MT/ha of bituminous. Soil pH, contents of available P2O5, organic matter, exchangeable Ca2+ and Mg2+ of soil during the growing season were increased by application of fly ash, showing more effectiveness in bituminous than that in anthracite. By the application of fly ash, the nutrients availability and the acidity of soil were reformed and they caused significantly the increase of growths yield, and quality of tobacco. By the application of lime reforming soil acidity, growth response, yields and quality of tobacco were not increased compared to the control, although the effect of reforming soil pH was remarkable.

• Journal of Environmental Policy
• /
• v.4 no.1
• /
• pp.93-111
• /
• 2005

Defining soil quality in scopes and applications is one of the prerequisite for the sustainable management of soil environment to orient researches, strategies and policies. However, definition of soil quality is controversial depending upon a viewpoint of soil science or soil environment. Soil quality can be, irrespective of the disciplines, defined as the capacity of a soil to function within ecosystem boundaries to sustain biological productivity, maintain environmental quality and promote plant and animal health. Common to all of the soil quality concepts can be summarized as the capacity of soil to function effectively at present and in the future. The OECD includes soil quality as one of the agri-environment indicators. This article intends to i) summarize the current soil quality research, and ii) provide information on protocol of soil quality assessment. A framework for soil quality was divided into three steps: indicator selection as minimum data set (MDS), scoring of the selected indicators, and integration of scores into soil quality index. Korean government suggested possible physical and chemical indicators such as bulk density and organic matter for paddy and upland soils to OECD. The framework of soil quality assessment is not yet implemented in Korea. Countries such as USA, Canada and New Zealand have constructed the framework on soil quality assessment and developed a user-friendly version of soil quality assessment tools to evaluate the integrated effects of various soil management practices. The protocol provided in this review might help policymakers, scientists, and administrators improve awareness about soil quality and understand the way of soil environment management.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.39-50
• /
• 2014

The goal of this work is to develop a framework of methods to entirely evaluate effects of LID (Low Impact Development) on soil-groundwater environmental quality as well as land-scape and ecological factors. For this study, we conducted an extensive literature review. As outcomes, soil-groundwater environmental quality is newly conceptualized as a comprehensive index reflecting (i) groundwater pollution sensitivity (hydrogeological factor), (ii) biochemical contamination, and (iii) biodegradability. The methods of classifying and indexing is shown by combining selection of the items to be measured for soil-groundwater environmental quality and integrating the resulted items comprehensively. In addition, from soil-groundwater environmental quality, land-scape and ecological factors in existing environmental impact assessment a method was developed an overall index which can evaluate effects to environment by using GIS (Geographic Information System) and AHP (Analytic Hierachy Process). For optimizing LID planning, designing and post-evaluation, LCIA (Life Cycle Impact Assessment) was regarded as an appropriate method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.623-633
• /
• 2017

Food waste has been recognized as a organic sources for composting and many research was conducted to efficiently utilize or treat. This study was to evaluate a feasibility for producing food waste compost under co-composting with mixture of food and animal waste. The mixing ratio of food and animal waste was 35% as main material, which additionally mixed 30% of sawdust for co-composting. Total days of composting experiment were 84 days and each sub samples were collected at every 7 days from starting of composting. Results showed that inner temperature in composting was rapidly increased to $70{\pm}4^{\circ}C$ within 3~5 days depending on mixing animal waste of cattle, pig, and chicken base compared to sole food waste base. Expecially, the CN ratio in the mixture of food and pig water was the highest (16.2) among compost. After finishing composting experiment, maturity was evaluated with solvita and germination test. Maturity index (MI) of the mixture of food and animal waste was ranged between 6~7, but was 3 in sole food waste. Calculated germination index (GI) was at the range of about 100 irrespectively of mixing of food and animal waste. However, NaCl content and heavy metal as Cr, Cu, Ni, Pb, and Zn contents was increased in the mixture of food and animal waste. which was the highest in compost mixed the food and pig waste. Both MI and GI showed that manufactured fertilizer was suitable for fertilizer criteria while sole food waste was not adequate for composting due to composting periods. Overall, mixing the food and animal waste can be utilized for improving compost maturity, but more research should be conducted to make high quality of food waste compost with animal waste in agricultural fields.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.131-134
• /
• 2002

Mulberry being the only food of silkworm, Bombyx mori L., is of great economic importance to the silk industry, The success in cocoon production mainly depends on the supply of quality leaves in sufficient quantity. In mulberry, where the economic product is leaf, the uptake of nitrogen from soil is very heavy and high responses to application of nutrients have been reported. Nitrogen supports vegetative growth particularly the leaf biomass. Variation in nitrogen harvest index and other physiological and yield contributing traits were estimated in five mulberry genotypes. Considerable variation was observed for nitrogen harvest index, protein yield per plant and harvest index. The correlation studies indicated the protein yield per plant was significantly correlated with leaf yield, nitrogen content in leaf, nitrogen harvest index and harvest index. The broad sense heritability estimates revealed that harvest index showed highest heritability (88.07%) followed by nitrogen content (82.52%), protein yield (70.28%) and nitrogen harvest index (66.52%).