• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.155-170
• /
• 2016

This study established the definition of invasive disturbance species for a sustainable management and biodiversity, and derived the influence factors caused by the species. To define the species, the paper reviewed similar words such as alien species and invasive species, using standard definitions. Also reviewed the results of recent research on the factors of the species. The paper defined the invasive disturbance species as an species whose establishment and spread threaten ecosystems, habitats or species with economic or environmental harm including native and non-native. Through the reviews, The factors were classified as geographic (altitude, slope, and soil, etc.), climate (temperature, precipitation, climate change, etc.) and, anthropogenic (land use, population, road, and human activity, etc.), and species & vegetation structure (species property, local-species richness, and canopy, etc.). Especially, human activity such as urbanization and highways may be associated with both higher disturbance and higher propagule pressure. In the further study, it is required development of mitigation strategies and vegetation structure model against invasive disturbance species in urban forest based on this study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.1
• /
• pp.3-16
• /
• 2004

A finite element method is used for the force analysis of semicircular arch shaped corrugated steel plate lining. The assessment of stability and behavior for several conditions are executed from the analysis of soil-structure interaction in accordance with CHBDC (Canadian Highway Bridge Design Code, 2000). One fortieth scaled model tests were conducted on the semicircular arch lining to verify the FEM analysis results under the earth-load conditions.

• Geomechanics and Engineering
• /
• v.22 no.1
• /
• pp.25-33
• /
• 2020

In metropolitan areas, the quantity and density of the underground structure increase rapidly in recent years. Even though most damage incidents of the underground structure were minor, there were still few incidents causing a great loss in lives and economy. Therefore, the safety evaluation of the underground structure becomes an important issue in the disaster prevention plan. Liquefaction induced uplift is one important factor damaging the underground structure. In order to perform a preliminary evaluation on the safety of the underground structure, simplified prediction equations were introduced to provide a first order estimation of the liquefaction induced uplift. From previous studies, the input motion is a major factor affecting the magnitude of the uplift. However, effects of the input motion were not studied and included in these equations in an appropriate and rational manner. In this article, a numerical simulation approach (FLAC program with UBCSAND model) is adopted to study effects of the input motion on the uplift. Numerical results show that the uplift and the Arias Intensity (Ia) are closely related. A simple modification procedure to include the input motion effects in the Sasaki and Tamura prediction equation is proposed in this article for engineering practices.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.2
• /
• pp.44-54
• /
• 1988

This study was carried out to investigate the applicability of the conventional design method for ground supported circular cylindrical shell structures. For this purpose, the ensiled farm silo was adopted as a model structures. Herein, the conventional design method was based on the assumption that such structures are clamped at the bottom edges or the ground pressure is independent of the deflection at the surface. In the present paper, the applicability of above assumption was checked out by comparison with an exact method considering soil-structure interaction. Some results of numerical calculation show us ; When the ground is very hard, for example Winkler's constant k is larger than 100 kg / cm$^2$ / cm, or the bottom plate of structures has a infinitely stiffness, for example the bottom plate thickness is larger than 100 cm, the sectional forces, obtained from the conventional method at any wall of structures resting on an elastic foundation, can used for design purpose. Therefore, if the above condition is satisfied then the conventional assumptions can be justified for the design purpose. In this case, the assumption that such structures are fixed at the lower edges was more realistic than the assumption that the reaction pressure acting on structures is uniformly disributed since the accuracy of results of the analysis by the former assumption was higher than that obtained from the latter assumption. But the sectional forces in the bottom plate resting on ground directly could not be evaluate correctly by the conventional method.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2001

The greenhouse heating system using solar energy has been realized in the protective agriculture in this study in order to analyse the thermal energy characteristics of the system the effects of ambient air temperature, solar radiation, relative humidities and water content of ambient air on the greenhouse air temperature were investigated through computer simulation experimental analysis for validation of the simulation. The results from this study are summarized as follows: 1) The expected values of inside air temperature for the system solar energy were very much close to the experimental values. 2) In the system using solar energy, the expected values of daytime surface temperature of soil by computer simulation were very much similar to the measured values, but those of nighttime were higher than the measured value by almost $2.5^{\circ}C$. 3) Heat loss of daytime was found to be larger than that of night time as much as 2.0 to 4.2 times for the system using solar energy. 4) In the system using solar energy. while the ambient air temperature varied between $-7^{\circ}C$ and $-3.8^{\circ}C$, the temperature of the inside air was maintained between $0^{\circ}C$ and $22^{\circ}C$. 5) At the minimum ambient temperature of $-7^{\circ}C$, the temperature of the inside air was $0^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1310-1314
• /
• 2008

수도권 지역의 신도시 개발에 따른 유역의 도시화와 인구 증가는 유역의 피복상태를 변화시키고, 생태계에 영향을 미치는 수문학적 과정과 하천수질의 변화를 초래하게 된다. 지표면의 침투, 침루 및 토양함수량을 변화시키고, 차단저류량과 요지저류량(depression storage) 등을 변화시킴으로서 유출량과 수질을 변화시키게 되는 것이다. 이와 같은 수문학적과정을 평가하기 위해서는 수문모형을 사용하는데 본 연구에서는 미국 농림부에서 개발한 SWAT모형을 이용하였다. SWAT-K모형은 SWAT(Soil and Water Assessment Tool) 모형에 인위적, 자연적인 물순환 구조변화와 지표수-지하수 연계 해석 등을 개선하여, 강우 증발산 토양수분 지표수 지하수 등의 시, 공간적 분포를 정량적으로 산정하는 장기유출 해석 모형이다. 또한, 본 모형의 적용을 위하여 GIS를 이용한 공간정보를 처리하여 수문모형의 매개변수를 결정하는 방법이 널리 사용되고 있는데, 본 연구에서는 ArcView GIS를 이용하여 입력자료를 구축하였다. 대상유역은 판교유역으로서 신도시 개발이 한창 진행되고 있는 지역으로서, 개발 과정에 따라 수문특성, 유출특성, 수질변화 특성 등이 계속하여 변화되고 있으며, 개발이 완전히 종료된 이후의 특성을 예측할 필요가 있는 유역이다. 본 연구에서는 SWAT-K모형을 이용하여 판교 신도시 개발에 따른 장기유출량을 예측하였고 모델의 매개변수를 최적화하였으며, 그 결과 본 모델이 장기 유출량 해석 및 판교유역의 수문변화를 평가하는데 유용하게 적용될 수 있을 것으로 판단되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.219-228
• /
• 2003

Numerical and experimental studies were conducted on the temperature distribution of a buried steel pipe and surrounding granite frozen soils in the closed system. The relationship between unfrozen water content and temperatures was analysed by laboratory test. The thermal conductivity measurements were made to compare the results with a formula presented by Lachenbruch. A steel container model that consists of a freezing chamber and a buried circular steel pipe was built for the laboratory temperature measurements. The time temperature records were measured experimentally, and those records were compared with numerical results obtained from FEM analysis in order to verify the feasibility. The latent heat effect on the granite frozen soils in the numerical study was considered.

• Structural Engineering and Mechanics
• /
• v.20 no.3
• /
• pp.313-334
• /
• 2005

The paper presents a new approach for the analysis of slope stability that is based on the numerical solution of a differential equation, which describes the thrust force distribution within the potential sliding mass. It is based on the evaluation of the thrust force value at the endpoint of the slip line. A coupled approximation of the slip and thrust lines is applied. The model is based on subdivision of the sliding mass into slices that are normal to the slip line and the equilibrium differential equation is obtained as the slice width approaches zero. Opposed to common iterative limit equilibrium procedures the present method is straightforward and gives an estimate of slope stability at the value of the safety factor prescribed in advance by standard requirements. Considering the location of the thrust line within the soil mass above the trial slip line eliminates the possible development of a tensile thrust force in the stable and critical states of the slope. The location of the upper boundary point of the thrust line is determined by the equilibrium of the upper triangular slice. The method can be applied to any smooth shape of a slip line, i.e., to a slip line without break points. An approximation of the slip and thrust lines by quadratic parabolas is used in the numerical examples for a series of slopes.

• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.79-92
• /
• 1998

Parametric studies based on laboratory pilot tests were performed to investigate the relationships between electrical resistivity and properties of contaminated soils. Three kinds of sandy soils sampled and leachate from an industrial waste landfill were mired to model the contaminated soils. Electrical resistivity of soils was measured by using a simulated resistivity cone penetrometer probe. In the experiments. the electrical resistivity was observed by changing the water content, void ratio, unit weight, degree of saturation, and concentration of the leachate. The test results show that the electrical resistivity of soils depends largely on the water content and the electrical property of pore water rather than unit weight and types of soils.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.553-562
• /
• 2008

A remediation technique for buried pipeline system subject to permanent ground deformation is proposed. Specifically, EPS (expanded polystyrene) geofoam blocks are used as low density backfill, thereby reducing soil restraint and pipeline strains. In order to evaluate this remediation technique, a series of 12 centrifuge model tests with HDPE pipe were performed. The amount or spatial extent of the low density backfill was varied, as well as the orientation of the pipe with respect to the fault offset. Specifically, in the $-63.5^{\circ}$ test, the orientation was such that the pipe was placed in flexure and axial tension. The $-85^{\circ}$ orientation placed the pipe mainly in flexure. In all cases, the behavior of the remediated pipe was compared to that for the unremediated pipe. The geofoam backfill was successful in improving pipe behavior for two of the three pipe/fault orientations. However, for the $60^{\circ}$ orientation, the pipe buckled in compression irrespective of the geofoam backfill.