• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.49-56
• /
• 2013

The use of geothermal energy has been increased for economic and environmental friendly utilization. Ground thermal conductivity and borehole thermal resistance are very important parameters in the design of geothermal heat pump system. This paper presents an experimental study of heat exchange rate of U and W type ground heat exchangers (GHEs) measured by thermal performance tests (TPTs). U and W type GHEs were installed in a partially saturated dredged soil deposit, and TPTs were conducted to evaluate heat exchange rates under 100-hr continuous operation condition. The heat exchange rates were also calculated by analytical models to estimate borehole thermal resistances and were compared with experimental results. It comes out that multi-pole and equivalent diameter (EQD) models resulted in more accurate agreement than shape factor (SF) model which is currently more often used.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.87-99
• /
• 2016

We present the results of two-dimensional numerical simulations predicting the flow of groundwater in a fractured unsaturated zone. We applied the k-field distribution of permeability derived from discrete fracture network (DFN) modeling as the hydraulic properties of a model domain. To model an unsaturated zone, we set the depth from the ground surface to the underground aquifer. The rate of water infiltration into the unsaturated zone was divided into two parts, an artificial structure surface and unsaturated soil zone. The movement of groundwater through the unsaturated zone was simulated with particular emphasis on contaminant transport. It was clearly observed that the contaminants dissolved in groundwater transported vertically from the ground surface to the saturated zone.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2011

The composition of species for each community of Quercus by vegetation and soil survey, the community classification by TWINSPAN, the structural characteristics of communities were used and analyzed during the period of 2000~2004 for Quercus mongolica forest. And the resulting suggestions for a subsequent planting model for forest are as follows. The Quercus mongolica community had the highest importance value for Quercus mongolica followed sequentially by Acer pseudosieboldianum, Acer mono, Rhododendron schlippenbachii, Tilia amurensis, Fraxinus rhynchophylla, and Fraxinus sieboldiana. As a result of suggesting a planting modeling for the Quercus mongolica communities in the areas with the warmth index of both $60.90{\sim}79.79^{\circ}C$ and $53.96{\sim}64.82^{\circ}C$, Quercus mongolica was absolutely dominant in case of the subtree layer for the accompaniment species of distribution in the planting modeling by tree layer in the two areas depending on the warmth index, while there were distinct differences shown in case of the lower tree layer. While Acer pseudosieboldianum, Tilia amurensis, Fraxinus rhynchophylla, Sorbus alnifolia, Acer mono, etc. were appeared in the subtree layer for the areas with the warmth index of $60.90{\sim}79.79^{\circ}C$. Cornus controversa, Quercus mongolica, Fraxinus sieboldiana, etc. were many appeared in the subtree layer for the areas with the warmth index of $53.96{\sim}64.82^{\circ}C$. And, when we made ecological Quercus mongolica community, subtree layer planting is different by warmth index.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2015

In this study, an online seed potato sorting system using a visible and near infrared (40 1100 nm) transmittance spectral technique and statistical model was evaluated for the nondestructive determination of infected and sound seed potatoes. Seed potatoes that had been artificially infected with Pectobacterium atrosepticum, which is known to cause a soil borne disease infection, were prepared for the experiments. After acquiring transmittance spectra from sound and infected seed potatoes, a determination algorithm for detecting infected seed potatoes was developed using the partial least square discriminant analysis method. The coefficient of determination($R^2_p$) of the prediction model was 0.943, and the classification accuracy was above 99% (n = 80) for discriminating diseased seed potatoes from sound ones. This online sorting system has good potential for developing a technique to detect agricultural products that are infected and contaminated by pathogens.

• Journal of the Korean Society of Groundwater Environment
• /
• v.1 no.2
• /
• pp.113-120
• /
• 1994

One of the delicate problems in aquifer management is the identification of the spatial distribution of tile hydrological parameters. The observed data are insufficient to identify the distribution of transmissivities in LAN aquifer. To determine the distribution of the transmissivity in LAN aquifer, it would be required to transform the observed heads at the pilot points into transmissivities. Therefore, three procedures wire tackled for the identification of the spatial distribution of the hydrological parameters; geostatistical estimate of the parameter field on the basis of known well point, heads reconstructed by a numerical model, and modification of the values at pilot points by a minimization algorithm. The variogram of Kriging has been applied to a total of 258 transmissivity value in attempt to quantify their distribution of LAN aquifer. Variogram of the observed and optimized transmissivities at pilot points are adapted to the exponential form. So, it is fitted by theoretical one with coefficients of w=0.623, a=2.743. Values of head obtained through numerical analysis are adjusted to the observed values so that heads have been transformed completely into the transmissivities at the observation wells. The procedure represented contour map of the estimated transmissivities and the calculated head.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.595-600
• /
• 2012

This study is to assess the application of SWAT-CUP(Soil and Water Assessment Tool-Calibration Uncertainty Programs) and to extend daily flow data from 8-day interval flow data which has been measured by Korean Ministry of Environment(MOE). Model sensitivity analysis and calibration were performed with sequential uncertainty fitting(SUIF-2), which is one of the programs interfaced with SWAT, in the package SWAT-CUP. The most sensitive parameters were SOL_K.sol, CH_N2.rte, CN2.mgt, SOL_BD.sol, ALPHA_BF.gw, ALPHA_BNK.rte, SOL_AWC.sol, CH_K2.rte, SFTMP.bsn, GW_DELAY.gw. Following the sensitivity analysis, SWAT-CUP calibration was carried out using 8-day interval flow data from January 2008 to December 2010. The results were then assessed based on the visual agreement and simulated flow plots and the performance statistics generated $R^2$ and NSE which are 0.71 and 0.61 respectively. Results of these statistics indicated that there was a good agreement between the observed and simulated flow. To extend daily flow data from 8-day interval flow data, parameters, which were estimated by SWAT-CUP, re-entered for SWAT model. As a result, the observed flow data were found to reflect the trend of simulated flow data. From these results, it is thought that this method could be used to provide daily flow data using 8-day interval flow data.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1081-1091
• /
• 2012

SWAT model is applied to simulate rainfall-runoff and pollutant loadings in the Nakdong River basin as the condition for extreme droughts and floods. The year 1994 and 2002 are chosen as the drought and flood year, respectively, through the analysis of past rainfall data for 30 years. The simulation results show decreases in both runoff and pollutant loadings for the drought year but increases for the flood year. However, the pollutant loadings on some upper sub-basins increase for drought year due to highly-regulated dam discharge and soil moisture change. Collectively, extreme droughts and floods have negative impacts on water quality, showing elevated SS loadings during wet season and concentrated T-P concentrations during low flow season. The extent of these impacts is highly influenced by antecedent dry days and precipitation patterns.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.971-975
• /
• 2009

본 연구에서는 격자강우량과 GIS와 연계한 격자기반의 공간수문자료들을 모형의 입력매개변수로 활용하고, 수계망을 통하여 유역 출구까지 운동파(kinematic wave)이론에 의해 유출량을 물리적으로 추적해 나가는 격자기반의 분포형 강우-유출모형인 K-DRUM(Kwater Distributed RUnoff Model)을 개발하였고, 지표유출량에 가장 큰 영향을 주지만 실제 관측 및 적용이 용이하지 않은 유역의 초기토양함수상태에 대한 자동보정기법을 개발하였다. 개발된 자동보정기법을 이용하여 남강댐유역을 대상으로 적용가능성을 평가하였다. 연구에서 사용한 강우사상은 남강댐 유역에 큰 영향을 준 태풍 루사 (2002년 8월 31일 01시$^{\sim}$9월1일 23시), 태풍 매미 (2003년 9월 12일 01시$^{\sim}$9월13일 23시), 2004년의 대류성강우 (2004년 7월14일 01시$^{\sim}$7월 16일 10시) 및 태풍 에위니아 (2006년 7월 8일 18시$^{\sim}$7월11일 12시)의 총 4개의 사상을 대상으로 하였다. 개발한 유역의 초기토양함수상태 자동보정기법에 의한 유출모의의 적용성을 검토하기 위하여 모의에 사용된 매개변수 중 토지피복도에 의해 결정되는 조도계수와 토양도에 의해 결정되는 유효토심, 흡인수두계수, 공극률 및 투수계수는 4개의 강우사상에서 모두 동일한 조건으로 설정하였고, 유역내 토양 내부 수분함유량 산정을 위한 초기 기저유출량은 검토대상 기간 시점부에서 관측된 유출량으로 설정하였다. 초기토양함수상태 자동보정기법 적용을 통한 유출해석의 정확도는 체적오차 백분율(VER)과 첨두 유량 오차 백분율(QER)을 이용하여 평가하였으며, 이를 통해 본 모형이 유출량에 대한 정확성을 확보하고자 하였다. 본 연구에서 개발된 자동보정 기법을 적용한 결과, 초기토양조건을 설정하는데 있어서 기존의 시행착오법으로 인해 소요되는 시간과 유역내 토양 특성과 지형형상을 고려하지 않는 설정으로 인해 발생될 수 있는 문제점을 해결할 수 있었으며, 유출계산 결과도 유량의 크기와 첨두시간 모두 관측값과 비교적 잘 맞는 것을 확인할 수 있었다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.719-731
• /
• 2003

In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The receptor methods were one of the statistical methods to achieve reasonable air pollution strategies. Also, receptor methods, a field of chemometrics, is based on manifold applied statistics and is a statistical methodology that analyzes the physicochemical properties of gaseous and particulate pollutant on various atmospheric receptors, identifies the sources of air pollutants, and quantifies the apportionment of the sources to the receptors. The objective of this study was 1) after obtaining results from the PMF modeling, the existing sources of air at the study area were qualitatively identified and the contributions of each source were quantitatively estimated as well. 2) finally efficient air pollution management and control strategies of each source were suggested. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols, the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided quantitative source contributions (scaled G matrix) and source profiles (scaled F matrix). The results of the PMF modeling showed that the sources were apportioned by secondary aerosol related source 28.8 ％, soil related source 16.8％, waste incineration source 11.5%, field burning source 11.0%, fossil fuel combustion source 10%, industry related source 8.3％, motor vehicle source 7.9%, oil/coal combustion source 4.4％, non-ferrous metal source 0.3％. and aged sea- salt source 0.2％, respectively.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.47-56
• /
• 2007

Resilient characteristics on unbound pavement materials have been adopted for design and nonlinear analysis of pavement structure under traffic loadings. However, relatively few studies have been done on the nonlinear resilient behavior of unbound materials in Korea. In addition to that, only the limited information is available for estimating the resilient modulus values on subgrade soils. In this study, a laboratory resilient-deformation test under repeated loadings is performed in order to establish the nonlinear characteristics of unbound subgrade soils in test roads. Then, a constitutive model that correlates the resilient modulus with moisture and stress state from field condition is proposed respectively. The results from all procedures are presented in this paper. Finally, a comparative analysis is conducted to identify the proper models in the stress dependent modulus and seasonal moisture condition of subgrade soils in test roads respectively.