• Smart Structures and Systems
• /
• v.30 no.6
• /
• pp.601-612
• /
• 2022

The prediction of structural mechanical behaviors is vital important to early perceive the abnormal conditions and avoid the occurrence of disasters. Especially for underground engineering, complex geological conditions make the structure more prone to disasters. Aiming at solving the problems existing in previous studies, such as incomplete consideration factors and can only predict the continuous performance, the deep attention fused temporal convolution network (DATCN) is proposed in this paper to predict the spatial mechanical behaviors of structure, which integrates both the temporal effect and spatial effect and realize the cross-time prediction. The temporal convolution network (TCN) and self-attention mechanism are employed to learn the temporal correlation of each monitoring point and the spatial correlation among different points, respectively. Then, the predicted result obtained from DATCN is compared with that obtained from some classical baselines, including SVR, LR, MLP, and RNNs. Also, the parameters involved in DATCN are discussed to optimize the prediction ability. The prediction result demonstrates that the proposed DATCN model outperforms the state-of-the-art baselines. The prediction accuracy of DATCN model after 24 hours reaches 90 percent. Also, the performance in last 14 hours plays a domain role to predict the short-term behaviors of the structure. As a study case, the proposed model is applied in an underwater shield tunnel to predict the stress variation of concrete segments in space.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.39-52
• /
• 2022

Multilayer perceptron neural network was trained to determine the factor of safety and slip surface of the slope. Slope geometry is a simple slope based on Korean design standards, and the case of dry and existing groundwater levels are both considered, and the properties of the soil composing the slope are considered to be sandy soil including fine particles. When curating the data required for model training, slope stability analysis was performed in 42,000 cases using the limit equilibrium method. Steady-state seepage analysis of groundwater was also performed, and the results generated were applied to slope stability analysis. Results show that the multilayer perceptron model can predict the factor of safety and failure arc with high performance when the slope's physical properties data are input. A method for quantitative validation of the model performance is presented.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.2
• /
• pp.12-29
• /
• 2023

Conceptual site model (CSM) development and enhancement for contaminated sites assists in identifying data gaps during the site investigation process. In this study, CSM was developed and enhanced for a contaminated site in Korea as a case study. Site Y was scrutinized four times previously. The site profiles for each scrutiny were reorganized based on the scrutiny reports, and the relevant data was utilized to develop and enhance CSMs. CSM for the first investigation was developed in various forms including table, flowchart, diagram, and narrative formats. CSM was enhanced in a stepwise manner by incorporating the updated profile information obtained in next investigation to existing CSM. The hypothetical data gap analysis between each investigation step was established to meet the purpose of the follow-up investigation. This case study showed that CSM is a useful tool to identify the history and current status of contaminated sites and thereby help in planning supplementary investigations for better site characterization.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.151-158
• /
• 2006

Centrifuge tests have shown that a uniformly placed sand layer will first initiate liquefaction near the surface and that liquefaction will progress downward during shaking. This appears to be in conflict with the overburden stress effect on soil liquefaction (i.e., $K_0$ effect) observed in laboratory testing. This discrepancy can be explained by stress-induced densification at depth which overcomes the effect of confining stress on liquefaction resistance. Stress densification occurs in centrifuge model tests but its effect has generally not been considered when preparing or evaluating centrifuge models. A new centrifuge model preparation method is proposed by considering stress-induced densification upon spin-up. The proposed method can be used to explore $K_0$ effects. The method is supported in this study by numerical predictions.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.29-37
• /
• 2007

The experiments have been conducted on Kaolinite in laboratory to investigate the development of shrinkage cracking and propose a simple model. Image analysis method consisting of control point selection(CPS) technique is used to process and analyze images of soil cracking captured by a digital camera. The distributions of crack length increment and crack area increment vary as a three-step process. These steps are regarded as stages of soil cracking. They are in turn primary crack, secondary crack and shrinkage crack stages. In case of crack area, the primary and secondary stages end at normalized gravimetric water content(NGWC) of 0.92 and 0.70 for different specimen thicknesses respectively. In addition, the primary stage in case of crack length also ends at NGWC of 0.92 while the secondary stage stops at NGWC of 0.79, 0.82, and 0.85 for the sample thicknesses of 0.5, 1.0, and 2.0 cm respectively Based on the experimental results, the distributions of crack length increment and crack area increment appear to be linear with a decrease of NGWC. Therefore, the development of shrinkage cracking is proposed typically by a simple model functioned by a combination of three linear expressions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.55-61
• /
• 2009

In this research freezing depth analyses were performed for the recent 9 project field sites using FrostAM which is a freezing analysis model developed recently within the country and a model based on regional environmental factors and physical properties of pavement materials. The environmental factors needed for freezing depth analysis were obtained from the meteorological agency website. And there were laboratory tests and analyses using a measuring device for properties of unsaturated soil for the field site samples across country to obtain hydrographical properties among physical properties. The freezing depths analyzed by FrostAM were deeper in the range of 14cm~44cm than those based on freezing index. It is considered that the freezing depths based on freezing index were overestimated. And there are considerable differences among the freezing depths based on freezing index which were designed by different designers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.80-80
• /
• 2022

본 연구는 한강유역 (35,770 km²)을 대상으로 RUSLE (Revised Universal Soil Loss Equation)과 WATEM/SEDEM (The Water and Tillage Erosion Model and Sediment Delivery Model)의 유사이동식을 활용하여 인간활동과 기후변화로 인한 유사량을 평가하였다. 대상유역에 영향을 주는 16곳의 기상관측소에서 제공하는 분 단위 누적강수량 (2000-2019), 농촌진흥청 토양도, 국토지리정보원 DEM (Digital Elevation Model), 환경공간정보서비스 (EGIS) 2020년 세분류 토지이용도를 활용하여 RUSLE과 WATEM/SEDEM 유사이동식에 필요한 강우침식인자(R), 토양침식인자 (K), 지형인자 (L·S), 식생피복인자 (C), 그리고 보전관리인자 (P)를 구축하였으며, SWAT (Soil and Water Assessment Tool)으로 모의한 표준유역 단위 연도별(2000-2019) 유사량 결과를 기준으로 WATEM/SEDEM 유사량 계수 (KTC)를 검·보정하였다. 토양침식 산정 입력자료 중 강우량으로 산정하는 강우침식인자는 기후변화를 보여주는 인자, 토지피복에 따라 다른 식생피복인자와 보전관리인자는 인간활동을 나타내는 인자로 설정하였다. 강우침식인자는 2010년대 평균값을 활용하여 현재의 유사량을 평가하였으며, 분 단위 자료가 없는 과거의 경우 직접적인 계산에 어려움이 있어, 연평균 강수량과의 관계로 추정한 1980년대 평균값을 활용하여 기후변화로 인한 영향을 평가하였다. 식생피복인자와 보전관리인자는 1980년대 토지이용도를 활용하여 산정한 결과로 인간활동에 의한 유사량 평가에 사용되었다. 대상유역의 유사량은 RUSLE 모형의 토양침식량과 WATEM/SEDEM 유사이동량을 mass balance로 분석하며, 다른 인자들은 고정한 상태로 과거 강우침식인자, 식생피복인자와 보전관리인자를 적용하여 인간활동과 기후변화로 인한 유사량 변화를 분석하고자 한다.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.109-118
• /
• 1999

Recently, transport parameters of conservative solutes such as KCl in a porous medium have been successfully determined using time domain reflectometry (TDR) . This study was initiated to Investigate the applicability of TDR technique to monitoring the fate of a heavy metal ion in a sandy soil and the distribution of its concentration along travel distance with time. A column test was conducted in a laboratory that consists of monitoring both resident and flux concentrations of $ZnCl_2$in a sandy soil under a breakthrough condition. A tracer of $ZnCl_2$(10 g/L) was injected onto the top surface of the sample as pulse type as soon as a steady-state condition was achieved. Time-series measurements of resistance and electrical conductivity were performed at 10 cm and 20 cm of distances from the inlet boundary by horizontal-positioning of parallel TDR metallic rods and using an EC-meter for the effluent exiting the bottom boundary respectively. In addition. Zn ions of the effluent were analyzed by ICP-AES. Since the mode and position of concentration detected by TDR and effluent were different, comparison between ICP analysis and TDR-detected concentration was made by predicting flux concentration using CDE model accommodating a decay constant with the transport parameters obtained from the resident concentrations. The experimental results showed that the resident concentration resulted in earlier and higher peak than the flux concentration obtained by EC-meter, implying the homogeneity of the packed sandy soil. A close agreement was found between the predicted from the transport parameters obtained by TDR and the measured $ZnCl_2$concentration. This indicates that TDR technique can also be applied to monitoring heavy metal concentrations in the soil once that a decay constant is obtained for a given soil.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.9-15
• /
• 2013

This study is to evaluate the parameter behavior of VfloTM distributed rainfall-runoff model by applying 3 kinds of rainfall interpolation methods viz. Inverse Distance Weighting (IDW), Kriging (KRI), and Thiessen network (THI). For the 1,544 $km^2$ Dongcheon watershed of Nakdong river, the model was calibrated using 4 storm events in 2007 and 2009, and validated using 2 storm events in 2010. The model was calibrated with Nash-Sutcliffe model efficiency of 0.97 for IDW, 0.94 for KRI, and 0.95 for THI respectively. For the sensitive parameters, the saturated hydraulic conductivity ($K_{sat}$) for IDW, KRI, and THI were 0.33, 0.31, and 0.43 cm/hr, and the soil suction head at the wetting front (${\Psi}_f$) were 4.10, 3.96, and 5.19 cm $H_2O$ respectively. These parameters affected the infiltration process by the spatial distribution of antecedent moisture condition before a storm.

• Journal of Korean Society of Rural Planning
• /
• v.5 no.2 s.10
• /
• pp.56-65
• /
• 1999

Recently, new concept and paradigm of 'Environmentally-Friendliness' is taking a growing interest in environmental planning and design. This study is to establish the evaluation model for environmentally-friendliness of 'Tourism Farms' in rural areas by LISREL structural equation model. A questionnaire survey was conducted for deputy manager group and expert group. As the Result of LISREL structural equation model, the environmentally-friendliness of tourism farms is composed of three categories. First, conservation of global environment (Low Impact), second, friendliness to surrounding nature(High Contact), and third, environmental health and amenities (Health & Amenity). Five indicators, such as (1)saving of energy and water resource, (2)reduction and reuse of garbage, (3)natural purification of sewage disposal, (4)utilization of natural energy, (5)campaign and education programs of environmentally-friendliness, were affecting the first category, i.e., conservation of global environment(Low Impact). Friendliness to surrounding nature (High Contact) is affected by 3 indicators, (1)contact to nature and diverse green areas, (2)water intimate & contact areas, (3)natural ecology observation by biotope. Finally, the dimension of environmental health and amenity is affected by 3 indicators, (1)nature affinity by farming experience, (2)environmental-friendliness of soil & crops by organic farming, (3) campaign and education programs of environmentally-friendliness. Total coefficient of determination of the structural equation model by LISREL was 0.897, which showed high explanatory power.