• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.79-94
• /
• 2011

Black carbon (BC), a kind of high surface area carbonaceous material (HSACM), was isolated from Andong lake sediment. Sorption and desorption kinetics of naphthalene (Naph) and phenanthrene (Phen) in organic carbon (OC) and BC in the Andong lake sediment were investigated. Several kinetic models such as one-site mass transfer model (OSMTM), two-compartment first-order kinetic model (TCFOKM), and a newly proposed modified two-compartment first-order kinetic model (MTCFOKM) were used to describe the sorption and desorption kinetics. The MTCFOKM was the best fitting model. The MTCFOKM for sorption kinetics showed that i) the sorbed amounts of PAHs onto BC were higher than those onto OC, consistent with BET surface area; ii) the equilibration time for sorption onto BC was longer than those onto OC due to smaller size of micropore ($11.67{\AA}$) of BC than OC ($38.18{\AA}$); iii) initial sorption velocity of BC was higher than OC; and iv) the slow sorption velocity in BC caused the later equilibrium time than OC even though the fast sorption velocity was early completed in both BC and OC. The MTCFOKM also described the desorption of PAHs from the OC and BC well. After desorption, the remaining fractions of PAHs in BC were higher than those in OC due to stronger PAHs-BC binding. The remaining fractions increased with aging for both BC and OC.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.34-45
• /
• 2011

For the Hancheon drainage area in Jeju island, a groundwater flow model using Visual MODFLOW was developed to simulate artificial recharge through injection wells installed in the Hancheon reservoir. The model was used to analyze changes of the groundwater level and the water budget due to the artificial recharge. The model assumed that $2{\times}10^6m^3$ of storm water would recharge annually through the injection wells during the rainy season. The transient simulation results showed that the water level rose by 39.6 m at the nearest monitoring well and by 0.26 m at the well located 7 km downstream from the injection wells demonstrating a large extent of the affected area by the artificial recharge. It also shown that, at the time when the recharge ended in the 5th year, the water level increased by 81 m at the artificial reservoir and the radius of influence was about 2.1 km downstream toward the coast. The residence time of recharged groundwater was estimated to be no less than 5 years. The model also illustrated that 15 years of artificial recharge could increase the average linear velocity of groundwater up to 1540 m/yr, which showed 100 m/yr higher than before. Increase of groundwater storage due to artificial recharge was calculated to be $2.4{\times}10^6$ and $4.3{\times}10^6m^3$ at the end of the 5th and 10th years of artificial recharge, respectively. The rate of storage increase was gradually diminished afterwards, and storage increase of $5.0{\times}10^6m^3$ was retained after 15 years of artificial recharge. Conclusively, the artificial recharge system could augment $5.0{\times}10^6m^3$ of additional groundwater resources in the Hancheon area.

• Journal of Environmental Impact Assessment
• /
• v.12 no.2
• /
• pp.87-98
• /
• 2003

The main purpose of this study is to propose the integrated assessment model for the rational and effective selection of proposed sites in National Trust (NT) and conserve the ruined natural environment by excessive land development. The results of this study are as follows; 1) The specialists thought that rare and endangered species were very important in plant and animal, in case of landscape and environment, naturality and water quality were too important. 2) In the result of the correlation measure on the indicator of assessment, 'erosion of soil'and 'air pollutant'was highly correlative. Secondly, 'suspended solids' and 'erosion of soil'was high correlation. 3) In the result of forming the factors into the integrated indicators, they were classified into conditional, stable, valuable and potential factors and the purpose of this formation is to evaluate proposed sites in NT objectively and rationally with organic assessment. 4) In the integrated assessment model, the degree of explanation was observed approximately 36.4% and the important factor was the conditional factor, but we have to consider all factors for the effective and objective assessment. Therefore we organically have to apply and use them for the assessment of proposed sites in NT. It turns out to offer raw data on the land conservation and carry out the role of the instrument of measurement. As for future directions, the follow are proposed: 1) adaptation of real proposed site, 2) verification of effect and problem, 3) practical survey for diverse types as mountain, coast and inland.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.91-103
• /
• 2004

A series of shaking table model tests were performed to verify the validity of similitude law, which is suggested by lai (1989) to simulate the dynamic behavior of soil-fluid-structure system for is shaking table tests. In the tests, the similitude law suggested by lai was applied to determine the length and the time scaling factors. Also, the steady state concept was used in determining the density of model backfill soil, which is a key factor in simulating the development of excess pore pressure during shaking. The similitude law was verified by checking whether three different sizes of quay walls show the identical behavior or not. The similar responses of acceleration, excess pore pressure and horizontal displacement of walls were obtained far the small and large models. However, the medium model showed larger responses than those of the small and large models because of the resonance between the frequency of input acceleration and the natural frequency of the wall system. In addition, the vertical displacement and rotational angle of the walls became larger with the increase of model size.

• Interaction and multiscale mechanics
• /
• v.3 no.1
• /
• pp.95-110
• /
• 2010

In recent years, study of the static response of pavements to moving vehicle and aircraft loads has received significant attention because of its relevance to the design of pavements and airport runways. The static response of beams resting on an elastic foundation and subjected to moving loads was studied by several researchers in the past. However, most of these studies were limited to steady-state analytical solutions for infinitely long beams resting on Winkler-type elastic foundations. Although the modelling of subgrade as a continuum is more accurate, such an approach can hardly be incorporated in analysis due to its complexity. In contrast, the two-parameter foundation model provides a better way for simulating the underlying soil medium and is conceptually more appealing than the one-parameter (Winkler) foundation model. The finite element method is one of the most suitable mathematical tools for analysing rigid pavements under moving loads. This paper presents an improved solution algorithm based on the finite element method for the static analysis of rigid pavements under moving vehicular or aircraft loads. The concrete pavement is discretized by finite and infinite beam elements, with the latter for modelling the infinity boundary conditions. The underlying soil medium is modelled by the Pasternak model allowing the shear interaction to exist between the spring elements. This can be accomplished by connecting the spring elements to a layer of incompressible vertical elements that can deform in transverse shear only. The deformations and forces maintaining equilibrium in the shear layer are considered by assuming the shear layer to be isotropic. A parametric study is conducted to investigate the effect of the position of moving loads on the response of pavement.

• Geomechanics and Engineering
• /
• v.10 no.6
• /
• pp.757-774
• /
• 2016

Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to $1000million\;m^2$, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two decades ago in the field of structural engineering that can also be used in geotechnical engineering. CFRP has all the benefits associated with geosynthetics and it boasts higher strength, higher modulus, no significant creep and reliability in aggressive environments. In this paper, the performance of a CFRP reinforced retaining wall is investigated using the finite element method. Since the characterization of behavior of soils and interfaces are vital for reliable prediction from the numerical model, soil and interface properties are obtained from comprehensive laboratory tests. Based on the laboratory results for CFRP, backfill soil, and interface data, the finite element model is used to study the behavior of a CFRP reinforced wall. The finite element model was verified based on the results of filed measurements for a reference wall. Then the reference wall simulated by CFRP reinforcements and the results. The results of this investigations showed that the safety factor of CFRP reinforced wall is more and its deformations is less than those for a retaining wall reinforced with ordinary geosynthetics while their construction costs are in similar range.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.233-245
• /
• 2009

Availability of pressuremeter test for evaluation of geotechnical properties of foundation soil into which guardrail post is to be installed is investigated in this study. First, an analysis method of the post based on the pressuremeter test is proposed that can obtain bending moment and load-deformation profiles of the post. Then static horizontal load test onto a small scale guardrail post is performed in order to get bearing capacity and load-deformation pattern of the model post. The obtained results are compared with the load-deformation curves and bearing capacity of the post obtained from the pressuremeter method. In addition horizontal impact test to the post is performed using a model bogie car in order to check failure pattern around the model foundation and to investigate dynamic bearing capacity due to deceleration and inertia force of the soil. It is verified that the pressuremeter test is so useful and reasonal technique to analyze road foundation-post interaction.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.123-133
• /
• 2014

It is important to predict the groundwater level fluctuation for effective management of groundwater monitoring system and groundwater resources. In the present study, three different time series models for the prediction of groundwater level in response to rainfall were built, those are transfer function noise model (TFNM), artificial neural network (ANN), and adaptive neuro fuzzy interference system (ANFIS). The models were applied to time series data of Boen, Cheolsan, and Hongcheon stations in National Groundwater Monitoring Network. The result shows that the model performance of ANN and ANFIS was higher than that of TFNM for the present case study. As lead time increased, prediction accuracy decreased with underestimation of peak values. The performance of the three models at Boen station was worst especially for TFNM, where the correlation between rainfall and groundwater data was lowest and the groundwater extraction is expected on account of agricultural activities. The sensitivity analysis for the input structure showed that ANFIS was most sensitive to input data combinations. It is expected that the time series model approach and results of the present study are meaningful and useful for the effective management of monitoring stations and groundwater resources.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.556-561
• /
• 2006

This study was conducted to choose end-members and tracers for application of End Member Mixing Analysis (EMMA) model for the coniferous forest catchment, Gwangneung Gyeongi-do near Seoul metropolitan of South Korea (N $37^{\circ}$ 45', E $127^{\circ}$ 09'). This coniferous forest of Pinus Korainensis and Abies holophylla was planted at stocking rate of $3.0stems\;ha^{-1}$ in 1976. Thinning and pruning were carried out two times in the spring of 1996 and 2004 respectively. We monitored two successive rainfall events during ten days from June 26, 205 to July 5, 2005. Two storm events were selected to determine the end members and natural traces for hydrograph separation. The event 1 amounts to 161.9 m for two days from June 26 to 27, 2005. The event 2 precipitates to 139.2 mm for one day of July 1, 205. Throughfall, groundwater, soil water and stream water of the two events above were sampled through the bulk and automatic sampler. Their chemical properties were analyzed for prediction of the main tracer. The end members that contribute to the stream runoff were identified from the three components including groundwater, soil water and throughfall. Each component and stream water in the two events formed the suitable mixing diagram in case of chloride-nitrate ion and sulfate-potassium ion. Especially, chloride-nitrate ion was found to be the most suitable tracers for EMMA model in the two events.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.25-34
• /
• 2013

This paper presents the results of a reduced-scale physical model investigation into the behavior of retaining walls subject to cycles of wetting and drying due to rainfall infiltration. Reduced-scale model walls equipped with a water spraying system that can simulate the wetting process were first constructed and a series of tests were conducted with due consideration of different rainfall intensities and backfill soil types. The results indicate that cycles of wetting and drying process have adverse effects on the wall behavior, increasing wall deformation as well as earth pressure acting on the wall, and that the first cycle of wetting and drying process has more pronounced effect on the wall performance than the ensuing cycles. It is also shown that the degree to which the wetting and drying cycles affect the wall behavior depends greatly on the backfill soil type, and that the larger the fine contents, the greater is the effect of cycles of wetting and drying on the wall behavior. Practical implications of the findings from this study are discussed in great detail.