• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.383-390
• /
• 2010

Exposure to fugitive dust can contribute to several respiratory health problems, and proper sampling of fugitive dust is necessary to assess exposure. However, field sampling of soil dust encounters problems from spatial and temporal differences in soil properties, field operations, and meteorological conditions. To minimize these problems, we designed a dust generator that simulates dust generation from soil. The dust generator consisted of a rotating chamber where soil samples were loaded and tumbled, and a settling chamber, where airborne soil dust samples were collected. As standard operating conditions, we decided on 2 g soil mass, 10 min sampling time, and 20 rpm rotating speed, with a flow rate of 30 l/min, based on three common soil textures of loam, sandy loam and silt loam. To evaluate optimal operating conditions, we used mixtures of Joomoonjin silica sand and clay. Although the average $PM_{10}$ concentration of Joomoonjin silica sand was low, dust concentrations were increased by an increased content of clay. The dust concentrations were consistent across repeated experiments, and showed similar concentration profiles during the sampling time with mixtures of clay and sand (coefficient of variation was $13.6{\pm}w;7.1%$). The results demonstrated that these standard operating conditions were suitable for the dust generator, which can be used to investigate variations in soil properties that affect dust production and potential potency of fugitive dust exposure.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.559-571
• /
• 2022

Deep soil mixing, DSM technique has been widely used to improve the engineering properties of problematic soils. Due to growing urbanization and the industrial developments, disposal of brick dust poses a big problem and causes environmental problems. This study aims to use brick dust in DSM application in order to minimize the waste in brick industry and to evaluate its effect on the improvement of the geotechnical properties. Three different percentages of cement content: (10, 15 and 20%) were used in the formation of soil-cement mixture. Unlike the other studies in the literature, various percentages of waste brick dust: (10, 20 and 30%) were used as partial replacement of cement in soil-cement mixture. The results indicated that addition of waste brick dust into soil-cement mixture had positive effect on the inherent strength and stiffness of loose sand. Cement replaced by 20% of brick dust gave the best results and reduced the final setting time of cement and resulted in an increase in unconfined compressive strength, modulus of elasticity and resilient modulus of sand mixed with cement and brick dust. The findings were also supported by the microscopic images of the specimens with different percentages of waste brick dust and it was observed that waste brick dust caused an increase in the interlocking between the particles and resulted in an increase in soil strength. Using waste brick dust as a replacement material seems to be promising for improving the geotechnical properties of loose sand.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.409-417
• /
• 2020

Investigation was carried out to assess the effect of cement dust deposition on the physico-chemical properties of soil near some cement plants in Jaintia Hills, Meghalaya. Soil samples were collected and analysed and compared with the control site. Comparison of various soil physico-chemical parameters revealed that cement dust emanating from cement plants has changed the soil quality in the surrounding areas of cement plants. The normal soil pH in the area is generally acidic. However, due to the continuous deposition of cement dust soil pH was found slightly alkaline near the cement plants. The higher values of soil parameters such as electrical conductivity and bulk density were also noticed near the cement plants. However, lower values of water holding capacity, soil moisture content, soil organic carbon and total nitrogen content were found compared to the control sites. The effect of cement dust deposition on soil is more in areas nearer to the cement plants. At present the changes may not be so serious but if this trend continues, soil properties of a vast area around the cement plants are likely to change leading to multiple effects on flora, fauna and socio-economy of the area.

• Journal of Environmental Impact Assessment
• /
• v.13 no.6
• /
• pp.277-284
• /
• 2004

The chemical composition and properties of soil were determined at selected sites, such as Loess plateau, Gobi and sand deserts in northern China, where most dust storms occur. Although the transport of this sort of dust storms to Korean peninsula is a well-documented phenomenon, there is not enough information about the very source regions. In this reason, this study tried to measure the chemical composition, including soil elements, anthropogenic elements and ions for soil samples so that certain properties of some major source regions of Asian Dust can be provided. Furthermore, the results are classified into four types of soil like Loess, Loess & sand, Gobi, and sand in order to identify the characteristics and difference among the types. $(X/Al)_{crust}$ values for each soil type were also calculated in this study and compared with those of other references including Asian Dust material(ADM). The results indicated that Ca contribution was higher than Al in all the soil types of this study including ADM and, compared with the values of urban area, contribution of anthropogenic elements such as Cr, Pb, Zn was quite low. However, it must be noted that there is such a variation in the result of soil composition, but it is also certain that the very source region soil composition resolved from this study could support the enhanced study on Asian Dust phenomenon in Korea.

• Geomechanics and Engineering
• /
• v.5 no.6
• /
• pp.565-574
• /
• 2013

Extensive study was carried out on Clay expansive soil. This soil was silty clay and can be classified as CH. The degree of expansion was found to range from low to medium depending on the free swell and swell pressure tests. The research investigated the effect of using cement dust on swelling potential, Atterberg Limit, linear shrinkage, and mineralogical composition of expansive soil. The results showed that the swelling potential, plasticity index, linear shrinkage, and clay minerals decrease with increasing cement dust percentage. The cement dust accumulates in huge amounts as a side product in cement factories, and the disposal of this fine dust is very difficult and poses an environmental threat.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.52-60
• /
• 2010

The stone-dust is an unavoidable by-product of aggregate production, which is produced about 0.8~1.0 million $m^3$ annually. The stone-dust is currently regarded as a hazard material on environment because it is classified as an industrial waste in the Waste Management Law of Korea. At present, the stone-dust is considered as a environmentally hazardous material, and is classified as an industrial waste according to the Waste Management Law of Korea. In this study, we assessed the heavy-metal contamination of the stone-dust on surrounding environments by various leaching tests. Leaching experiments (such as Korea Standard Leaching Procedure (KSLP), Soil Environment Preservation Act of Korea (SEPAK), Toxicity Characteristic Leaching Procedure (TCLP), and Synthetic Precipitation Leaching Procedure (SPLP)) show that very low heavy metals (As, Cd, Cu, Pb, Zn, Hg) and CN are leached out, or much less than each regulatory thresholds. The resuts of the leaching test with time in acidic solution (initial pH 5 and 3) indicate that pH-buffering minerals are present in the stone-dust. These results suggest that the stone-dust can not potentially affect adverse impact on surrounding environments such as surface water, groundwater and soil etc..

• Journal of Soil and Groundwater Environment
• /
• v.24 no.6
• /
• pp.9-15
• /
• 2019

Soil dust emitted from large scale construction sites in urban areas has posed a significant health threats to local residents by exacerbating air quality. Water-spraying (moistening) is commonly practiced to lower the dust emission in construction sites, but its long term effectiveness is highly questionable. In this study, the utility of starch and PVA(polyvinyl alcohol) was investigated in suppression of the soil dust emissions in construction sites in Seoul areas. The efficiency of the two suppressants was tested with test soil sample in a lab-scale wind tunnel box under different concentrations of suppressants and soil textures. Starch and PVA showed the superior ability to suppress soil dust emission as compared to moistening, resulting in PM₁₀ and PM_2.5 lower than the daily limit values of 30 and 15 ㎍/㎥ respectively. PVA showed higher suppression capability than starch for all conditions. The test soils mixed with suppressants also showed dramatically enhanced aggregate stability compared to the non-treated soil.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.1
• /
• pp.1-11
• /
• 2012

A case study was conducted for a severe wintertime dust event that occurred on December 29, 2007 in Korea. Three different dust emission schemes, namely, those of Marticorena and Bergametti (1995), Lu and Shao (1999), and Shao (2004) (hereinafter, referred to MB, LS, and S04 schemes, respectively) were implemented in Weather Research Forecast with Chemistry (WRF/Chem) to assess their performance in simulating wintertime Asian dust events. WRF/Chem simulation reproduces dust emission over Mongolia on December 27 and 28, 2007 and the onset timing of the dust event in Korea well. There is, however, a huge difference among the estimated dust emission amounts for the three schemes; the dust concentration derived by MB scheme is 6 times larger than that from LS scheme. The three schemes overestimate dust concentrations when comparing to observed surface-level $PM_{10}$ mass concentrations in Ganghwa, Seoul, and Yeongwol. This discrepancy is thought to be mainly due to the overestimated model winds and the surface condition such as snow cover fraction, which did not adequately represent the real conditions. Considering frozen soil effect on dust emission, the model results are comparable with observation data: it is important to consider frozen soil in simulating wintertime dust events.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.889-895
• /
• 2016

In Danseong-myeon (myeon is a subdivision of), Sancheong-gun, and Sugok-myeon, Jinju City, pot seedling culture was used at the rates of 100% and 62%, respectively. Root restriction seedling culture was used relatively more frequently than pot seedling culture in Yangchon-myeon, Nonsan City, Guryong-myeon, Buyeo-gun, and Wolsan-myeon, Damyang-gun. Open-field seedling culture was used at the rates of 80% and 54% in Samnangjin-eup (eup is a subdivision of a gun), Miryang City and Ssangnim-myeon, Goryeong-gun, respectively. In Danseong, Sancheong, and Sugok, Jinju, granite soil was used as the medium for pot seedling culture at the rates of 90% and 80%, respectively. In Yangchon, Nonsan, Wolsan, Damyang, and Ssangnim, Goryeong, commercial bed soil and coir dust were used for seedling culture at the rates of 73%, 64%, and 60%, respectively. At the main production sites, the use of granite soil for seedling culture, highest rate in 2000-2005, continued to decrease; in 2011-2013, granite soil was used at the rate of 37%, while commercial bed soil and coir dust were used at the rates of 32% and 14%, respectively. The bulk density of commercial bed soil, expanded rice hulls, and coir dust was $0.11-0.16g/cm^{-3}$. Coir dust was the lightest material but had the highest and, 36.7% and 21.8%, respectively. In sandy loam soil and granite soil was low. The pH of all growth media was between 5.4 and 7.0, and the values were in the range of $0.15-0.66dS{\cdot}m^{-1}$. However it was necessary, to adjust the pH levels and enhance the of expanded rice hulls, sandy loam soil, and granite soil. Similarly, the fertilizer concentration and air permeability of coir dust need to be adjusted.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.129-135
• /
• 2011

EAF dust from steel industry used as primary materials for the production of lightweight aggregates. Fe compounds in EAF dust plays an important role in the bloating reaction. This study was conducted to evaluate the feasibility of using bottom ash and dredged soil from coal power plant and EAF dust. The effect of different raw material compositions and sintering temperatures on the lightweight aggregate properties were evaluated. The characteristic of thermal bloating of bottom ash and dredged soil were mainly influenced by ferrous materials. The specific gravity of aggregate was decreased with the addition of EAF dust and kerosene was reduced sintering temperature on the bloating formation. Lightweight aggregate containing 10% EAF dust having apparent density under 1.0 g/$cm^3$ were produced at $1150{\sim}1200^{\circ}C$.