• Journal of the Korean Society of Systems Engineering
• /
• 제6권1호
• /
• pp.61-68
• /
• 2010

Generally EPC management system was simply management concept through the normal S/W. Our LNG Plant R&D Center wanted to the excellent management system from the S/W. So We developed the R&D management S/W and EPC management S/W Built in the Microsoft Project Server. Our system made to the customer Requirements. It was just User Interface protocol. But User Interface has more Weak position, because it makes from the MS Project Servers. Ms Projector server make easy to treat the project on the WBS. EPC parts mixed WBS and normally Ms SQL Database. It has very complicated Structures. Now We planed to make the general Database and Ms Project Server, It' means to the S/W Developer and Schedule Manager ability. We will successfully integrate R&D management system and EPC system and other softwares.

• The KIPS Transactions:PartD
• /
• 제12D권2호
• /
• pp.267-274
• /
• 2005

New game softwares usually have much similarities with old one in the sense of properties and procedures. But nevertheless, the development could be duplicated several times without referencing or reusing of others. In addition, because there is no standardized process about the game engine, the products generated by other software development processes are difficult to understand and to reuse. Therefore, the enterprise developing new game software newly analyze and design although it is same process as the old one. This paper proposes the improved process of the game engine, analysis of structures and relations, classification of the class and the module and their combination methods, implementation of storage, and processor model to apply the component based development method to the game engine.

• The Transactions of the Korea Information Processing Society
• /
• 제5권1호
• /
• pp.49-62
• /
• 1998

Softwares which have many functions to satisfy user's requirements is developing. But generally, users use partial functions of software. If we could construct software which leave useful functions and remove unuseful functions in software with many functions, we could enhance execution efficiency by reduction of program size and quality of software. There are 6 items in international standard ISO/IEC 9126 about quality of software. These are functionality, reliability, usability, efficiency, maintenance and portability. In this study, we proposed metrics for measurement of efficiency and simplification method for source code. And we described products evaluation result and indicated problem and progress method for practical development project about proposed efficiency metrics.

• The KIPS Transactions:PartB
• /
• 제14B권1호
• /
• pp.43-50
• /
• 2007

This study proposes design of courseware based on scaffolding for teaching math word problem solving of students with intellectual disabilities. This courseware not only offer various technological supports to solving difficult problems of students with intellectual disabilities but also systematically withdraw that supports. Compared with previous related softwares, this courseware has potential that can adapt math strategies to meet different needs of individuals with intellectual disabilities, increase independent learning ability of learners and maintain high level of motive through successful problem solving experience.

• The KIPS Transactions:PartC
• /
• 제16C권5호
• /
• pp.555-562
• /
• 2009

In malware accident investigation, the most important thing is detection of malicious code. Signature based anti-virus softwares have been used in most of the accident. Malware can easily avoid signature based detection by using packing or encryption method. Because of this, packed file detection is also important. Detection methods can be divided into signature based detection and entropy based detection. Signature based detection can not detect new packing. And entropy based detection has a problem with false positive. We provides detection method using entropy statistics of entry point section and 'write' properties of essential characteristic of packed file. And then, we show packing detection tool and evaluate its performance.

• Journal of Korean Society of Steel Construction
• /
• 제13권2호
• /
• pp.115-122
• /
• 2001

Even in today's computer-oriented world with all its sophisticated analysis tools, engineering judgement is required to assess the adequacy of computer output. Approximate analysis method can be a feasible tool to check solutions from computer softwares roughly. It can be a simple tool for structural engineer to check force distribution in frame. Also, it can serve as a basis in selecting preliminary member sizes. The objective of this study is length factor and inflection points. The validity of this method is examined by comparing the results of this method with those of existing methods, showing improvement in the prediction of structural behavior.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.47-53
• /
• 2016

The aim of this study is to consider effect of weld elastic modulus on simulations of stress concentration and fatigue life for pressure vessel. The investigations include analysis with ADINA and WINLIFE softwares for whole body model about using condition of the boiler vessel. Values of weld elastic modulus were divided by 5 steps in butt weld area of the boiler vessel body. The stress concentration of the butt weld more was increased in case of higher elastic modulus of weld area because of higher difference of material properties between matrix and weld. It was concluded that the fatigue lives were decreased along increasing stress concentration due to high elastic modulus of weld. The matrix microstructure was estimated as pearlitic structure of ${\alpha}$ ferrite and pearlite. And the microstructures of welds along 5 steps of elastic modulus were estimated as bainitic fine pearlite and martensite as increasing elastic modulus.

• Spatial Information Research
• /
• 제8권1호
• /
• pp.69-83
• /
• 2000

Cadastral map is the basic data that prescribe a lot number, the classification of land category, a boundary and ownerships of the parcels. Because the analogue cadastral map is not appropriate for the Parcel Based Land Information System, computerization of cadastral map is needed. When considering other automatic vectorizing softwares, we conclude that they can not satisfy the accuracy needed in cadastral map. Also screen digitizing methods demand lots of time. So we developed semi-automatic vectorizing program that realized almost capacities, such as overlay display which is needed for screen digitizing , window link, vector file generation , and so forth. As comparing screen digitizing method using AutoCAD with our developed program, we could obtain not only almost same accuracy , but also 35 minute reduction in vectorizing.

• Korean Journal of Computational Design and Engineering
• /
• 제11권2호
• /
• pp.128-137
• /
• 2006

In this paper, a CAD/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares for a complex model in which the modeling by parametric feature is not easy to apply. Unigraphics is used for CAD modeling, in which the process is automated by using UG/Knowledge Fusion for modeling itself and UG/Open API function for the other functions respectively. Structural analyses are also carried out automatically by ANSYS using the imported parasolid model. The developed system is applied for the PLS(Plasma Lighting System) consisting of more than 20 components, which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The analyses include responses by static, wind and impact loads. As a result of analyses, tilt assembly, which is a link between upper and lower body, is found to be the most critical component bearing higher stresses. Experiment is conducted using MTS to validate the analysis result. Optimization is carried out using the software Visual DOC for the tilt assembly to minimize material volume while maintaining allowable stress level. As a result of optimization, the maximum stress is reduced by 57% from the existing design, though the material volume has increased by 21%.

• Korean Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.35-43
• /
• 1997

Concurrent Engineering is one of the methods which are used for the rapid product development. One of the important features in Concurrent Egineering is that the development process is to be parallel and the organization should be cross-functional. In order that the process be parallel and that the organization be cross-functional, an integrated information system such as PDM (Product Data Management) is required. Although the integrated data base is constructed, it could be meaningless if the application softwares were not inter-operable. This study shows an example of intergrated information system from three-dimensional product design to mold design and tooling for the development of Deflection Yoke(DY) which is one of the important parts of Cathode Ray Tube(CRT). A three-dimensional product design software, which is based on a commercial code, has been developed by ourselves. Selective Laser Sintering(SLS), which is one of the rapid prototyping techniques, has been used in this study. Mold design has been done by the three-dimensional way. A newly developed method of mold tooling, which is called Quick Die Manufacturing(QDM), has been introduced.