Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.9
/
pp.316-325
/
2018
In this paper, to integrate distributed IT resources and manage human resource efficiently as purpose of cost reduction, infrastructure of wind turbine monitoring system have been designed and developed on the basis of SaaS cloud. This infrastructure hierarchize data according to related task and services. Softwares to monitor conditions via the infrastructure are also developed. Softwares are made up of DB design, field measurement, data transmission and monitoring programs. The infrastructure is able to monitor conditions from SCADA data and additional sensors. Total time delay from field measurement to monitoring is defined by modeling of step-wise time delay in condition monitoring algorithms. Since vibration data are acquired by measurements of high resolution, the delay is unavoidable and it is essential information for application of O&M program. Monitoring target is gearbox in wind turbine of MW-class and it is operating for 10 years, which means that accurate monitoring is essential for its efficient O&M in the future. The infrastructure is in operation to deal with the gearbox conditions with high resolution of 50 TB data capacity, annually.
Information technology(IT) is changing rapidly based on growth of internet and computer businesses. Therefore, computer programs and softwares are distributed to computer users promptly for their productivity increase and efficient work. So, in the distribution, the softwares will be copied or released through network or other methods which are not authorized by the program owners. In that case, copyright dispute is incurred and various issues are come out due to infringement of the software copyright. Thus, the purpose of this study is to research infringement cases of the software copyright and how to settle the dispute which is related with software programs. To achieve the purpose of this study, this research consisted of 5 chapters. At chapter 1 introduction, it mentioned necessity of this study, purpose and how to research this study, and at chapter 2 dispute factors indicated and summarized for technical resolution. At chapter 3, infringement cases of software copyright analyzed and studied upon intellectual property(IP) related laws. And methods of dispute settlement discussed and suggested to chapter 4 for copyright and intellectual property protection. Also, it emphasized importance of arbitration to resolve the issues timely and avoid time and economical consumption. Of course, arbitration law has to be matched with the trend of technology development for effective settlement. At chapter 5 conclusion, it summarized this research and suggested further research for empirical test of economic value of the software copyright upon the aspect of business, law, and engineering. In this study, the results are 1) IP related laws have to be enacted or revised to meet technical changes for the protection of software copyright on time. The enactment or the revision of law takes a long time, therefore, to deal the dispute effectively, 2) arbitration law has to be utilized efficiently in order to resolve issues and settle the dispute promptly. It is suggested the dispute settlement through arbitration to save time and economic matters for legislation, and to harmony with the technology trends. 3) Recognition of software copyright is to be improved by users and enterprises for development of software related industries and intellectual property protection. In conclusion, the protection of software copyright is important than any other things in the field of IT because of the development of industry and intellectual property related laws. The development is for areas of business, law and engineering, so research and practices are to be combined with the areas so that it could resolve the dispute settlement and IP protection effectively.
Journal of the Korea Academia-Industrial cooperation Society
/
v.9
no.6
/
pp.1754-1759
/
2008
To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.
The objective of the In-h(High Level Architecture) have recommended by DoD(Department of Defense) is to facilitate interoperability among simulations and to promote reuse of their components. There are many legacy simulation softwares developed before the HLA becomes simulation standard. The integration of legacy simulations into federations using the HLA is an important research topic in M&S(Modeling and Simulation) area. Legacy simulation softwares of the mission critical industry such as nuclear and aerospace are generally use Fortran language. However, the reuse of those is not easy because the HLA is not support Fortran language. This paper suggests a integration method which minimizes the modification of legacy simulation software and migrates the legacy simulation software to HLA federation. Each federate participating in federation have the separated executables that communicate via a shared memory created at run-time. Two types of shared memory blocks are used for publication and subscription. Declaration block for global variables used in legacy simulation software is separated for publication and subscription and then mapped as classes of objects and interactions for the HLA FOM design. To validate the suggested method, we approached the HLA integration of legacy nuclear simulation code being used in plant design and to observe the integration results, we used the FMT(Federation Management Tool). The diagnostic information which the FTM displays showed that our method can be successfully and effectively used for a HLA federation.
Proceedings of the Earthquake Engineering Society of Korea Conference
/
2000.04a
/
pp.170-177
/
2000
Recently many high-rise apartment buildings are constructed using the box system which is composed only of concrete walls and slabs. Commercial softwares such as ETABS used for the analysis of high-rise apartment buildings are employing the rigid diaphragm assumption for simplicity in the analysis procedure. In general the flexural stiffness of floor slabs are ignored in the analysis, This assumption may be reasonable for the estimation of seismic response of framed structures. But in the case of the box system used in the apartment buildings floor slabs has major effects on the lateral stiffness of the structure. So if the flexural stiffness of slabs in the box system is ignored the lateral stiffness may be significantly underestimated, For these reasons it is recommended to use plate elements to represent the floor slabs. In the study A typical frame structure and a box system structure are chosen as the example structure. When a 20 story frame structure is subjected to the static lateral loads the displacements of the roof are 15.33cm and 17.52cm for the cases with and without the flexural stiffness of the floor slabs. And in case of box system the roof displacement was reduced from 16.18cm to 8.61cm The model without the flexural stiffness of floor slabs turned out to elongate the natural periods of vibration accordingly.
Korean Journal of Computational Design and Engineering
/
v.13
no.4
/
pp.296-304
/
2008
Recently, various attempts are being done to apply off-line programming system to field of paint robot. But most commercial simulation softwares have problems that are slow simulation speed and not support various painting paramenters on simulation. This paper proposes enhanced paint simulation method for off-line programming system. For these, this method used the mathematical model of flux field from a previous research. The flux field has the flux distribution function, which reflects on the feature of paint spray. A previous research derived this flux distribution function for an integral function and calculated paint thickness function for an integral function. But if flux distribution function is defined as an integral function, it is inadequate to use for real-time simulation because a number of calculation is needed for estimation of paint thickness distribution. Therefore, we defined the flux distribution function by numerical method for reducing a mount of calculation for estimation of paint thickness. We derived the equation of paint thickness function analytically for reducing a mount of calculation from the paint distribution function defined by numerical method. In order to prove proposed paint simulation method this paper compares the simulated and measured thickness. From this comparison this paper show that paint thickness distribution is predicted precisely by proposed spray paint simulation process.
Journal of Korea Society of Industrial Information Systems
/
v.16
no.5
/
pp.83-92
/
2011
IDEF is a widely used methodology for traditional structured software development. As object-oriented softwares are widely used, an object-oriented version of IDEF, IDEF4, is developed. UML is de facto standard for object-oriented software development methods. Whereas IDEF is widely used for CALS/EC, UML is used for general object-oriented software development. Most software developers are not familiar with IDEF4 but familiar with UML. Moreover, UML has many CASE tools. So we can develop software efficiently if we convert IDEF4 model to UML model. In this paper, we transform IDEF4 models to UML models. We explain the rules and methods to convert IDEF4 model to UML model and applied the transform methods and rules to a case study.
Internet telephony is an Internet service which supports voice telephone using VoIP technology on the IP-based Internet. It has some advantages in that voice telephone services can be accompanied with multimedia services such as video communication and messaging services. In this paper we suggested an Asterisk-based Internet telephony system which can be easily scalable. Most current systems use text files to manage their configuration: SIP users, dialplans, IVR service and etc. But we designed the management system which introduces database tables for efficiency and scalability. It also supports web-based functions developed by using Asterisk, Apache, MySQL, jQuery, PHP and open source softwares.
Non-linear editing is an editing method that, unlike linear editing, enables users to insert a new frame between existing frames. Non-linear editing systems are systems that support such method, and are composed of a computer, a software and a capture board that inputs/outputs video signals. Non-linear editing is used for modern television broadcasts and movie productions. Recorded footage and various graphic sources are combined into one visual content through a non-linear editing system. In this paper, we will look into functions of various non-linear editing softwares (mainly the most common of all; Adobe Premiere) as well as their merits and demerits during the editing process, and will also discuss their future Improvement direction.
These days there are so many scheduling systems or softwares. But only few scheduling systems have succeeded in the market. In spite of powerful engine and functions, those systems have difficulties to be applied in real processes. In real processes, there are various constraints caused by physical or systematical environments of plants. Those constraints are too many to be handled in the system. This problem makes it difficult for the system to represent the details of processes. In order to resolve this problem, we have developed a specialized scheduling system for a target process. The system could be developed by the experts for target process and researchers for scheduling. In this study, a scheduling system for PVC process has been developed as an MILP (Mixed integer linear programming) model and coded in $Fortran^{TM}$. The scheduling system has been applied to two processes, which have different characteristics. Simulation results indicate that the profit of the target process can be increased by about 5% by implementing the scheduling system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.