• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.321-328
• /
• 2008

Software Test Bench should be simulated with maximum quality to real execution environment in order to verify the performance of software which is changed or newly developed. And especially faults detection and recovery are crucial function of the performance test environment. Simulated Software Test Bench based on processor emulator is attractive and can be available prior to hardware Software Test Bench if real time performance aspect is ignored. In this paper, the results of conceptual study for developing the simulated Software Test Bench are presented.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.10-15
• /
• 2014

This study presents technical description of the operating program development that operates the test bench for functional test of EECU. The test bench is capable of testing, simulation and adjustment of the EECU software using the operating program. The test bench is for the Development Project of the EECU platform for FADEC system. The operating program is consists of 3 modules which are the test bench operating module, cockpit simulator module and SILS module. The operating module mainly carries out the EECU test with manual operation and operating scenarios. Also that record and process the test data. The cockpit simulator module is capable of implementation of virtual cockpit control input and engine status display. The SILS module can simulate engine and EECU operation in software environment.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.269-275
• /
• 2000

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control. Therefore it is important to validate the required functions of developed system and interface between developed signaling systems. To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers with software module and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and developed software module is presented.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.315-321
• /
• 1999

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control, The software plays a major role in these microcomputer-based vital systems. Therefore it is important to design the software and validate the required levels of safety and reliability To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers, VME system and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and some developed subprogram is presented.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2014

Recently vehicle development trend changes from machinery vehicle to the electrical and electronic devices. As well the electrical and electronic devices commercial vehicles are increasing more than machinery system. The capacitance fuel sensor is a sensor that, by measuring the capacitance value of fuel level sensor MCU operating for the final voltage value of the signal output. That is increasing durability and fuel measurement accuracy more than conventional ceramic resistor type. For Sensor software verification R-BENCH TOOL generated test case automatically. We make the programmable Capacitor board for test. And it was confirmed that more than 98% of the high reliability of the software.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.33-41
• /
• 2019

This study presents the development of a lifetime test bench for the strain wave reducer which is a precision gear reducer of the robot to realize fault diagnosis and failure prognostics. To this end, the lifetime test bench was designed to detect the vertical forward/reverse direction rotation load. Through the lifetime test bench, it is possible to apply the same load spectrum from robot working scenarios. We developed a data integration gateway for fault data collection. Through the development of dedicated software for fault diagnosis and failure prognostics, these data from vibration, noise and temperature sensors were collected and analyzed along with the operation of the lifetime evaluation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.507-513
• /
• 2008

In this paper, we present a development of an Avionics Hot Bench(AHB) used for the verification of operational flight programs and fault analysis using various simulation and stimulation software. We propose an application of the open system architecture to develop the AHB which can be used for the development of a real aircraft avionics system. In the design of the AHB, to reduce the development period and cost we use as many as commercial off-the-shelf hardware and software items. The developed AHB is compared with the existing proven AHB which was used for T-50 avionics system development. Thorough comparison between the test results using the developed AHB and those using the existing AHB is performed and the overall comparison results are very satisfactory.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.740-754
• /
• 2015

This paper focuses on the reverse blocking busbar protection scheme with aim to improve the speed of its operation and at the same time to increase operational reliability, flexibility and stability of the protection during external and internal faults by implementation of the extended functionality provided by the IEC61850 standard-based protective Intelligent Electronic Devices (IEDs). The practical implementation of the scheme by the use of IEC 61850 standard communication protocol is investigated. The proposed scheme is designed for a radial type of a distribution network and is modeled and simulated in the DigSILENT software environment for various faults on the busbar and its outgoing feeders. A laboratory test bench is built using three ABB IEDs 670 series that are compliant with the IEC 61850 standard, CMC 356 Omicron test injection device, PC, MOXA switch, and a DC power supplier. Two types of the reverse blocking signals between the IEDs in the test bench are considered: hard wired and Ethernet communication by using IEC 61850 standard GOOSE messages. Comparative experimental study of the operational trip response speeds of the two implementations for various traffic conditions of the communication network shows that the performance of the protection scheme for the case of Ethernet IEC 61850 standard-based communication is better.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1420-1422
• /
• 2000

The railway signaling system consists of micro-computerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control. Therefore it is important to validate the required functions of developed system and interface between developed signaling systems. To verify the conditions and functions of signaling functions, the laboratory prototype test bench, which consists of personal computers LAN, will be developed. In this paper design of signaling system test-bench for high-speed signaling is described and developed software module are presented.